• Journal of the Korean Society of Costume
• /
• v.50 no.8
• /
• pp.5-16
• /
• 2000

This study attempts to examine compound weave among silk fabrics of Cho-Sun Dynasty. These silk fabrics have colorful patterns. They can be classified into two types by their texture structure one is called polychrome woven silk of which structure is plain or twill fabric : another is called satan damask of which structure is stain fabric. Their texture structure consist of warp and weft. In addition. there are other types of warp and weft for pattern structure ; various twill structures were used for patterns. A variety of colorful threads, including gold and silver ones. are used fur patterns in them. The brocaded-type fabric was primarily developed during Won Era of China. It was most developed in Ko-Rye Kingdom. During that era flat strip was used the most but its length was usually not long enough to finish one pattern. However, wrapped thread was increasingly used during the middle and later period of Cho-Sun Dynasty due to the development of weaving technology for gold thread. The brocaded-type fabric was produced in Korea and it was also Imported from China according to some record. There are some domestic empirical documents that show the names of imported Satin Samite, Brocaded satin and these are good evidence to prove the nationwide use of the cloth during Cho-Sun Dynasty. The density ratio of warp and weft is almost same except Samite in the third and Satin with flower motif in the second period is most density among them. C·F of Brocaded satin with Mang motif in the third period values the highest price. Brocaded satin, used with both gold and silver threads, is thickest.

• Water for future
• /
• v.10 no.1
• /
• pp.95-100
• /
• 1977

The empirical area-reduction method by W.M. Borland and C.R. Miller and its revised procedure by W.T. Moody were made of fitting the area and storage curves to the Van't Hul distributions. It should be noted that the reservoir is classified into one of the four standard types on the basis of the topographical feature of the reservoir in application of the method. In other words, this method did not take into account several considerafble factors affecting the mode of sediment deposition, but only the shape of the reservoir as a governign factor. This is why the method occasionally creates ambiguity in classification and accordingly leads to unexpected mode of deposition. This paper describes a generating an formula to decide the standard classification of four types Van's Hul distributions, taking into consideration quantitatively sediment-loss percent and capacity-inflow ratio as well as the shape of the reservoirs by multiple regression analysis using the least square method to get a better fit to the design curves. The result is expressed as $Y=-1.95+55.8X_1+0.14X_2+0.12X_3$ in which the the values of Y locate the standard type I through type IV in the range from ten to forty with the interval of ten. The regression analysis was correlated well with the standard errors of estimate of around two except for the case of the type IV. This formula does not give big difference from the Borland's work in general sityation, but it demonstrates acceptable results, giving somewhat precise replys for the specific reservoirs. Its application to the Soyang Lake, one of the largest reservoirs in the country, defined clearly the type II, while the original method located it in the boundary of the type II and type III.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.5
• /
• pp.463-470
• /
• 2016

Construction companies calculate their revenues and costs from constructing activities using the 'Percentage of Completion Method', which is based on ratio of actual construction cost to total costs estimated. The reliability of the net profit of construction companies is being evaluated lower than other industries due to incorrect application of 'Percentage of Completion Method' to cover losses actually occurred. Therefore, the purpose of this study is to verify the quality of earnings calculated based on 'Percentage of Completion Method' in terms of information usefulness. Results from empirical analysis show that investors in stock market underestimate the value of the construction companies' earning information by applying 'Percentage of Completion Method' and not actively use in investment decision making. Accordingly, it has been confirmed that the association between income information and stock prices falling. These results suggest the need for strict supervision of the supervisory authorities and the practical application of 'Percentage of Completion Method' in reliability.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.4
• /
• pp.296-305
• /
• 2005

Acoustic target strength (TS) of 12 commercially important fish species caught in the Korean waters had been investigated and their results were presented. Laboratory measurements of target strength on 12 dominant fish species were carried out at a frequencies of 75 kHz by single beam method under the controlled condition of the water tank with the 241 samples of dead and live fishes. The target strength pattern on individual fish of each species was measured as a function of tilt angle, ranging from $-45^{\circ}$ (head down aspect) to $45^{\circ}$ (head up aspect) in $0.2^{\circ}$ intervals, and the averaged target strength was estimated by assuming the tilt angle distribution as N ($-5.0^{\circ}$, $^15.0{\circ}$). The 75 to fish length relationship for each species was independently derived by a least - squares fitting procedure. Also, a linear regression analysis for all species was performed to reduce the data to a set of empirical equations showing the variation of target strength to fish length and fish species. An empirical model for fish target strength(TS, dB) averaged over the dorsal aspect of 158 fishes of 7 species and which spans the fish length(L, m) to wavelength(${\lambda}$, m) ratio between 6.2 and 21.3 was derived: TS: 27.03 Log(L)-7.7Log(${\kanbda}$)-17.21, ($r^2$=0.59).

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.2
• /
• pp.71-78
• /
• 2007

An experimental investigation was conducted to clarify the combustion characteristics of Polyethylene-GOX(PE-GOX) hybrid motor using a single-port fuel grain configuration. Data from the experiments were analyzed to evaluate the length-averaged regression rate of PE-GOX propellants. Based on the existing theories, the empirical regression rate formulas provided from Marxman[3,4] and Altman[14] showed good concordance with the PE-GOX experiments. The accuracy of the regression rate was then evaluated and compared with the measured one. As a result, Marxman's model was somewhat more precise than Altman's model in these experiments. Moreover, the consideration of the empirical regression rate showed that O/F ratio has minor variation due to the quasi constant inflow of the fuel during motor firing.

• Structural Engineering and Mechanics
• /
• v.50 no.1
• /
• pp.89-103
• /
• 2014

According to experimental studies made so far, design formula of shear characteristics suggested by ISO 22762 and JEAG 4614, representative design code for Lead Rubber Bearing(LRB) shows dependence caused by changes in compressive stress. Especially, in the case of atypical special structure, such as a nuclear power structure, placement of seismic isolation bearing is more limited compared to that of existing structures and design compressive stress is various in sizes. As a result, there is a difference between design factor and real behavior with regards to shear characteristics of base isolation device, depending on compressive stress. In this study, a full-scale low hardness device of LRB, representative base isolation device was manufactured, analyzed, and then evaluated through an experiment on shear characteristics related to various compressive stresses. With design compressive stress of the full-scale LRB (13MPa) being a basis, changes in shear characteristics were analyzed for compressive stress of 5 MPa, 10 MPa, 13 MPa, 15 MPa, and 20 MPa based on characteristics test specified by ISO 22762:2010 and based on the test result, a regression analysis was made to offer an empirical formula. With application of proposed design formula which reflected the existing design formula and empirical formula, trend of horizontal characteristics was analyzed.

• Journal of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.566-577
• /
• 2002

As advanced earthquake analysis/design methods such as the nonlinear static analysis are developed, it is required to estimate precisely the cyclic behavior of reinforced concrete members that is characterized by strength, deformability, and capacity of energy dissipation. However, currently, estimation of energy dissipation depends on empirical equations that are not sufficiently accurate, or experiment and sophisticated numerical analysis which are difficult to use in practice.0 the present study, nonlinear finite element analysis was performed to investigate the behavioral characteristics of flexure-dominant RC members under cyclic load. The effects of axial force, arrangement of reinforcing bars, and reinforcement ratio on the cyclic behavior were studied. Based on the investigation, a simplified method to estimate the capacity of energy dissipation was proposed, and it was verified by the comparison with the finite element analyses and experiments. The proposed method can estimate the energy dissipation of RC members more precisely than currently used empirical equations, and it is easily applicable in practice.

• Journal of IKEEE
• /
• v.18 no.2
• /
• pp.240-247
• /
• 2014

Intraocular pressure is measured after a cornea air puff by observing biomechanical properties such as thickness or displacement of the cornea. In this paper, we deal with a frequency domain analysis of corneal deformation in the air puff tonometry that is used to diagnose glaucoma or lasik. We distinguish the patient from the normal by measuring the oscillation frequency in the neighborhood of the central cornea section. A binary image was obtained from the video images, and cornea vertical oscillation profile was extracted from the difference between the vertical displacement data and the curve fitting. In terms of Fourier transform, a vibration frequency of 479.2Hz for the patient was obtained as well as more higher 702.8Hz for the normal due to stiffness. Hilbert-Huang transform's empirical mode decomposition generally describes local, nonlinear, and nonstationary data. After the data were decomposed into intrinsic mode functions, a spectrum and power were analysed. Finally, we confirm that the patient has 6 times more higher power ratio for the specific intrinsic mode function between the patient and the normal.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.2
• /
• pp.227-243
• /
• 2015

In this paper, the effects of nonlinear soft clay on dynamic embedment of offshore pipeline were investigated. Seabed embedment by pipe-soil interactions has impacts on the structural boundary conditions for various subsea structures such as pipeline, riser, pile, and many other systems. A number of studies have been performed to estimate real soil behavior, but their estimation of seabed embedment has not been fully identified and there are still many uncertainties. In this regards, comparison of embedment between field survey and existing empirical models has been performed to identify uncertainties and investigate the effect of nonlinear soil parameter on dynamic embedment. From the comparison, it is found that the dynamic embedment with installation effects based on nonlinear soil model have an influence on seabed embedment. Therefore, the pipe embedment under dynamic condition by nonlinear parameters of soil models was investigated by Dynamic Embedment Factor (DEF) concept, which is defined as the ratio of the dynamic and static embedment of pipeline, in order to overcome the gap between field embedment and currently used empirical and numerical formula. Although DEF through various researches is suggested, its range is too wide and it does not consider dynamic laying effect. It is difficult to find critical parameters that are affecting to the embedment result. Therefore, the study on dynamic embedment factor by soft clay parameters of nonlinear soil model was conducted and the sensitivity analyses about parameters of nonlinear soil model were performed as well. The tendency on dynamic embedment factor was found by conducting numerical analyses using OrcaFlex software. It is found that DEF was influenced by shear strength gradient than other factors. The obtained results will be useful to understand the pipe embedment on soft clay seabed for applying offshore pipeline designs such as on-bottom stability and free span analyses.

• STI Policy Review
• /
• v.3 no.1
• /
• pp.46-62
• /
• 2012

This study investigates the effects of the two most important indicators of a nation's state of scientific infrastructure: R&D investment and the number of R&D researchers engaged in high-tech product export competitiveness for a panel of 11 countries/economies from East Asia from 1994 to 2010. A GMM panel estimation method was employed to account for the dynamic effect of trade and to control for un-observed country specific effects that may arise due to an inter-country differences and intra-country dynamics. Accordingly, the empirical results reveal that (once controlled for the influence of per capita income) physical capital and infrastructure, a 1% increase in a country's expenditure on the ratio of R&D to GDP may increase high-tech product export performance by approximately $397 million per year. Other factors constant, a 1% increase in the number of R&D researchers is expected to increase the ability to export high-tech products by approximately $67 million. The East Asian development experience demonstrates how latecomers can follow systematic industrialization and join the handful of economies that have come a long way toward closing the knowledge gap with the global technological leaders. However, this does not mean that the policy approaches and overall commitments pursued by each East Asian economy in relation to R&D investment and acquisition of an adequate pool of researchers, and their ultimate achievements in high-tech product export competitiveness were uniform. As a result, there is still a significant variation among countries/economies in terms of performance. This study recommended a number of potential tools and policy instruments that may assist policy makers to foster R&D as an engine to enhance the high-tech product export competitiveness.