• 한국ITS학회 논문지
• /
• 제15권3호
• /
• pp.77-84
• /
• 2016

우리나라 교통부문 온실가스 배출량은 2012년 88백만tonCO2eq에 도달하였으며, 이 중 도로에서 발생한 배출량이 94%를 차지한다. 현재 에코드라이빙 교육 및 홍보 프로그램을 실시하고 있으나 도로선형을 고려한 친환경적 차량제어 연구는 미비한 실정이다. 따라서 본 연구는 고속도로를 대상으로 평면곡선부를 주행하는 차량의 연료효율적 주행 전략을 제시하는 것을 목적으로 하였다. 먼저 설계지침에 따라 이상적인 평면곡선부를 설계하고 차량의 안전을 고려하기 위해 안전속도를 산정하였다. 설계한 평면곡선부의 구간별로 가 감속 시나리오를 설정하였으며 앞서 산정한 안전속도를 기준으로 속도를 제한하여 속도 프로파일을 생성하였다. 생성한 속도 프로파일에 도로 선형에 따른 차량 속도변환식을 적용하였으며 Comprehensive Modal Emission Model에 적용하여 연료소모량을 산정하였다. 초기속도별 최적 시나리오를 도출하였으며 도출한 에코드라이빙 전략을 검증하기 위해 실제 운전자 주행과 에코드라이빙 전략을 적용 시 연료소모량을 비교 분석하였다. 분석결과, 에코드라이빙 주행 시 운전자의 주행보다 평균 20.73% 연료소모량 감축효과가 나타나는 것으로 분석되었다.

• Animal Bioscience
• /
• 제34권12호
• /
• pp.2023-2033
• /
• 2021

Objective: The present study was conducted to assess the effect of urease inhibitor (hydroquinone [HQ]) and nitrification inhibitor (dicyandiamide [DCD]) on nitrogen (N) use efficiency of pig slurry for perennial ryegrass regrowth yield and its environmental impacts. Methods: A micro-plot experiment was conducted using pig slurry-urea ¹⁵N treated with HQ and/or DCD and applied at a rate of 200 kg N/ha. The flows of N derived from the pig slurry urea to herbage regrowth and soils as well as soil N mineralization were estimated by tracing pig slurry-urea ¹⁵N, and the N losses via ammonia (NH₃), nitrous oxide (N₂O) emission, and nitrate (NO₃^-) leaching were quantified for a 56 d regrowth of perennial ryegrass (Lolium perenne) sward. Results: Herbage dry matter at the final regrowth at 56 d was significantly higher in the HQ and/or DCD applied plots, with a 24.5% to 42.2% increase in ¹⁵N recovery by herbage compared with the control. Significant increases in soil ¹⁵N recovery were also observed in the plots applied with the inhibitors, accompanied by the increased N content converted to soil inorganic N (NH₄⁺+NO₃^-) (17.3% to 28.8% higher than that of the control). The estimated loss, which was not accounted for in the herbage-soil system, was lower in the plots applied with the inhibitors (25.6% on average) than that of control (38.0%). Positive effects of urease and/or nitrification inhibitors on reducing N losses to the environment were observed at the final regrowth (56 d), at which cumulative NH₃ emission was reduced by 26.8% (on average 3 inhibitor treatments), N₂O emission by 50.2% and NO₃^- leaching by 10.6% compared to those of the control. Conclusion: The proper application of urease and nitrification inhibitors would be an efficient strategy to improve the N use efficiency of pig slurry while mitigating hazardous environmental impacts.

• 대한기계학회논문집B
• /
• 제36권2호
• /
• pp.131-136
• /
• 2012

본 논문에서는 GDI 엔진의 냉각수 온도에 따른 연소 및 배출가스 특성을 연구하였다. 엔진에서 나오는 입자상 물질의 수와 크기 분포는 DMS-500 장비로 측정하였다. 배기포트 에 장착된 CLD-400 과 HFR-400 을 통해 NOx 및 THC 의 배출 특성을 연소주기 별로 측정하였다. 결과적으로 낮은 냉각수온에서 5~10 nm 의 입자상 물질이 크게 증가하는 특성을 보였다. THC 또한 낮은 냉각수온에서 증가하는 특성을 보였는데 이는 연소실 내 연료의 액막현상 때문이다. 그리고 NOx 는 높은 냉각수온에서 감소하는 특성을 보였는데 이는 내부 EGR 이 증가하기 때문이다. 결론적으로 THC 와 NOx 그리고 입자상 물질의 배출을 줄이기 위해서는 냉각수온을 빠르게 올리는 EMS 변수 설정 필요하다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.103-106
• /
• 2014

The effects of hydrogen ($H_2$) ratio on combustion and emission characteristics in a $H_2/diesel$ dual-fuel engine were investigated. Dual-fuel strategy was applied to improve the control of combustion phasing. The combustion phasing was retarded with increasing $H_2$ fraction. This can be explained by both reduced diesel concentration and chemical effect of $H_2$, which reduce the heat release rate during the low temperature reaction stage. Hydrocarbon and carbon monoxide emissions of the engine were decreased drastically when $H_2$ ratio was increased.

• 한국연소학회지
• /
• 제18권4호
• /
• pp.21-28
• /
• 2013

HCCI engines have mainly focused on achieving low temperature combustion in order to obtain higher efficiency and lower emission. One of practical difficulties in HCCI combustion is to control the start of combustion and subsequent combustion phasing. The choice of primary reference fuels in HCCI strategy is one of various promising solutions to make HCCI combustion ignition-controlled. The behavior of ignition delay to the frequency variation of sinusoidal velocity oscillation is computationally investigated under HCCI conditions of PRF75 using a reduced chemistry in a counterflow configuration. The second-stage ignition is more delayed as the higher frequency is imposed on nozzle velocity fluctuation whereas the first-stage ignition is not much influenced.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.1005-1008
• /
• 1999

HMC has developed the lean burn system with alpha 4-valve into domestic market in the end of 1997. In a viewpoint of saving energy and prevention of global warming (CO2 reduction), the lean burn system has recently attracted a considerable attentions in gasoline engines. There has been, however, difficulty in extending LML(Lean Misfire Limit) enough to meet the emission regulations and satisfaction of driveability. In this paper some descriptions will be given upon the new technology of lean bum engine which will be installed in Accent, especially the improvement of the combustion, the development of engine management system such as intake system and wide range air fuel control strategy, and the result of vehicle test.

• 소성∙가공
• /
• 제26권5호
• /
• pp.277-285
• /
• 2017

Vehicle weight reduction is a known strategy to improve fuel efficiency and strengthen exhaust gas regulation. The use of high strength steel can satisfy safety, efficiency, emission, manufacturability, durability, and cost requirements. However, springback of high strength steel results in undesired shape defects. Springback is one of the most important issues of high strength steel for many applications in an automobile. Servo press has various capabilities to improve defects, process conditions, and productivity problems when forming a high strength steel. Especially, servo press can be set to function with variable slide motion in a single operation. In this study, the effect of servo press slide motion on 980MPa high strength steel was investigated through U-bending test.

• 유공압시스템학회논문집
• /
• 제6권4호
• /
• pp.1-8
• /
• 2009

Nowadays with the high fuel prices, the demands for energy saving and green emission of construction machinery have highly been increased without sacrifice of working performance, safety and reliability. The aim of this paper is to propose a new energy saving hybrid excavator system using an electro-hydraulic actuator driven by an electric motor/generator for the regeneration of potential energy. A 5 ton class excavator is analyzed, developed with the boom for the evaluation of the designed system. The hardware implementation is also presented in this paper. A control strategy for the hybrid excavator is proposed to operate the machine with a highest efficiency. The energy saving ability of the proposed excavator is clearly verified through simulation and experimental results in comparison with a conventional hydraulic excavator.

• 한국수소및신에너지학회논문집
• /
• 제35권2호
• /
• pp.230-239
• /
• 2024

Efforts are being made to replace ship diesel engines with electric propulsion motors in response to emission regulations. In particular, in the case of short-range small ships, research is being conducted to replace polymer electrolyte membrane fuel cells (PEMFC) with power sources. However, PEMFC has problems such as slow dynamic response characteristics and reduced durability at high temperatures. To solve this problem, a high-precision ship model was developed with power distribution and thermal management strategies applied, and through this, the required power, heat, and power characteristics of the propulsion system according to the ship's speed profile were analyzed.

• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.118-124
• /
• 2011

To reach the Euro-6 regulations of PM and $NO_x$ for light-duty diesel vehicles, it will be necessary to apply the CDPF and the de-$NO_x$ catalyst. The described system consists of a catalytic configuration, where the CDPF is placed downstream of the diesel engine and followed by a urea injection unit and a urea-SCR catalyst. One of the advantages of this system configuration is that, in this way, the SCR catalyst is protected from PM, and both white PM and deposits become reduced. In the urea-SCR system, the injection control of reductant is the most important thing in order to have good performance of $NO_x$ reduction. The ideal ratio of $NH_3$ molecules to $NO_x$ molecules is 1:1 based on $NH_3$ consumption and having $NH_3$ available for reaction of all of the exhaust $NO_x$. However, under the too low and too high temperature condition, the $NO_x$ reduction efficiency become slower, due to temperature window of SCR catalyst. And space velocity also affects to $NO_x$ conversion efficiency. In this paper, rig-tests were performed to evaluate the effects of $NO_x$ and $NH_3$ concentrations, gas temperature and space velocity on the $NO_x$ conversion efficiency of the urea-SCR system. And vehicle test was performed to verify control strategy of reductatnt injection. The developed control strategy of reductant injection was improved over all $NO_x$ reduction efficiency and $NH_3$ consumption in urea-SCR system. Results of this paper contribute to develop urea-SCR system for light-duty vehicles to meet Euro-5 emission regulations.