• Korean Journal of Plant Resources
• /
• v.11 no.1
• /
• pp.101-105
• /
• 1998

This study was carried out to find out the method of increasing seed germination rate of Dendropanax morbifera LEV. was drupaceous fruit. The length and width of ovarywas 7.8 to 10.7mm, 6.9 to 9.0mm, respectively, and the shape was elliptical. The ovary had 5 loculi with one speed per loculus , but one seed among 5 weeds was exalbuminous seed. The length and width of seed was 6.3 to 7.4mm, 2.0 to2.mm, respectively, and 1,000 seed weight was 14.3 to 18.0g. Seeding after stroring at $10^{\circ}C$ for 60 to 90 days was germinated to 87% . However, fall seeding directly after harvest was increased to 85% at hot-water treatement ($40^{\circ}C$) for 90 to 120 minute.

• Journal of the Korea Convergence Society
• /
• v.11 no.5
• /
• pp.165-173
• /
• 2020

The emergence of unmanned agricultural machinery has brought new research content to the development of precision agriculture. In order to speed up the research on key technologies of unmanned agricultural machinery, classification of intelligence level of unmanned agricultural machinery has become a primary task. In this study, the researchers take the complex interactive system consisting of unmanned grain harvester, task and driving environment as the research object, and carry out a research on the grading and classification of intelligent level of unmanned grain harvester. The researchers of this study also establish an evaluation model of unmanned grain harvester vehicle, which consists of human intervention degree, environmental complexity, and task complexity. Besides, the grading and classification of intelligence level of the unmanned grain harvester is carried out according to the human intervention degree, environmental complexity and the task complexity of the unmanned grain harvester. It provides a direction for the future development of unmanned agricultural machinery.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.5
• /
• pp.590-597
• /
• 2002

Currently, with the increasing demand for combining cellular phone and PDA, various kinds of PDA-phones are being developed. A typical PDA-phone consists of a CDMA processor and a PDA processor. Generally, a UART serial communication port is used for inter-processor communication. However, the CDMA standard will need more data bandwidth over 2Mbps with the emergence of IMT-2000. The bandwidth requirement is beyond the capability of UART. In this paper, several inter-processor communication mechanisms are analyzed and especially Dual Port Memory and USB were chosen as the candidates for the new communication mechanism. A prototype PDA-phone board has been implemented for experiment. The experimental result shows that Dual Port Memory is better than USB in cost performance.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.8
• /
• pp.327-334
• /
• 2013

Today's network traffic has become extremely complex and diverse since the speed of network became faster and a variety of application services appear. Moreover, many applications appear and disappear fast and continuously. However, the current traffic classification system does not give much attention to this dynamic change of applications. In this paper, we propose an application awareness system in order to solve this problem. The application awareness system can provide the information, such as the usage trend of conventional applications and the emergence of new applications by recognizing the application name in a rapidly changing network environment. In order to recognize the application name, the Host field of HTTP protocol has been utilized. The proposed mechanism consists of two steps. First, the system generates the candidates of application name by extracting the domain name from the Host field in HTTP packet. Second, the administrator confirms the name afterward. The validity of the proposed system has been proved through the experiments in campus network.

• Journal of Korean Society of Forest Science
• /
• v.90 no.1
• /
• pp.139-145
• /
• 2001

Behavior of Matsucoccus thunbergianae Miller and Park males immediately after emergence from their cocooning site, and meteorological factors affecting the responsiveness of the flying males to synthetic pheromone were studied. On Pinus thunbergii saplings, newly emerged males walked around to locate females. The males lanuched themselves into flight after up to three times of copulation. Without the presence of females, the males took off within five minutes whereas when the females were placed nearby but copulation was artifically prohibited the males did not take off. In a wind tunnel, the presence of female pheromone discouraged male take off. More males were flying in sunny area than in shade, but light intensity had no effect on the responsiveness of males toward the pheromone source. Wind speed was the main meteorological factor that affected the male responsiveness. Most males, after hitting the substrate near pheromone source with various posture, stood on their feet and approached the source.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.5
• /
• pp.825-834
• /
• 2021

With the development of various devices and Internet platforms, production and demand for content are increasing rapidly. However, effective response to exponentially increasing data usage is difficult in current TCP/IP schemes. As a result, with the emergence of an alternative called CCN, data can be transmitted and received from the host-centered to the content-oriented, and large-capacity content can be handled with more mitigated network resources. In this paper, we will address intermediate node mobility, which is one of the areas studied in CCN. In CCN, real-time services are a very important factor for information providers as well as requestors. However, when a node departure situation occurs, packet transmission and transmission speed decreases. Therefore, to ensure these numbers, even if the intermediate node deviates using a dual path, it provides a complete QoS (Quality of Service) using an alternative path.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.8-19
• /
• 2019

Since their emergence in 2007, smart phones have advanced up to the point that 5G mobile communication in 2019 started to be commercialized. Accordingly, now it is possible to share 3D modeling files and collaborate by means of a mobile web. As the recently commercialized 5G mobile communication network is so useful in sharing 3D modeling files and collaborating that even large-size geometry files can be transmitted at ultra high speed with ultra low transfer delay. We examines characteristics of major 3D file formats such as STL, OBJ, FBX, and glTF and compares the existing 4G LTE (Long Term Evolution) network with the 5G NR (New Radio) mobile communication network. The loading time and packets of each format were measured depending on the mobile web browser environments. We shows that in comparison with 4G LTE, the loading time of STL and OBJ file formats were reduced as much as 6.55 sec and 9.41 sec, respectively in the 5G NR and Chrome browsers. The glTF file format showed the most efficient performance in all of the 4G/5G mobile communication networks, Chrome, and Edge browsers. In the case of STL and OBJ, the traffic was relatively excessive in 5G NR and Edge browsers. The findings of this study are expected to be utilized to develop a 3D file format that reduces the loading time in a mobile web environment.

• Journal of Advanced Navigation Technology
• /
• v.23 no.1
• /
• pp.55-60
• /
• 2019

The web is one of the most intimate technologies in people's daily lives, and most of the time, people are sharing data on the web. Simple messenger, news, video, as well as various data are now spreading through the web. In addition, with the emergence of Web assembly technology, the programs that run in the existing native environment start to enter the domain of the Web, and the data shared by the Web is now getting wider and larger in terms of VR / AR contents and big data. Therefore, in this paper, we have studied how to effectively deliver web contentsto users who use Web service by using service worker that can operate independently without being dependent on browser and cache API that can effectively store data in web browser.

• Analyses & Alternatives
• /
• v.6 no.1
• /
• pp.195-222
• /
• 2022

From the economic development perspective, economic growth should accompany structural improvement in order to meet complex demands from a society. In the context of development economics, economic growth is critically dependent on successful structural advancement. The issue of structural change is also important for advanced economies as the landscape of modern industry is changing fast. Many advanced countries of slow growth are experiencing dawdling changes in industry structure. However, there is no definitive answer to the question of whether there is a causal relationship between structural change and growth. This study empirically assesses the relationship between structural change or 'speed' thereof and economic growth in developed countries of OECD. Rather than looking into the causes of structural changes, this study simply measures structural changes in OECD economies and examines if structural change is really contributing to growth. The reason why this study focuses on advanced countries of OECD is rather obvious; technological innovation and emergence of new industries pressure these countries to restructure their economies to address these new challenges though they are at stages well beyond conventional industrialization. And structural rigidity can always limit growth even in advanced countries. The main results of this study can be summarized as a positive relationship between 'change and growth'. 'Change' in this study refers to changes in the industrial structure based on value-added and was analyzed to have a close positive relationship with economic growth. This result is consistent with arguments of early development economists emphasizing structural upgrade as an indispensable process for growth and development. The result of this study potentially confirms that the main argument of development economics is valid also for advanced economies. One of our results suggests that business/professional services and social services should be main targets for restructuring for advanced economies. The rational may be that rapid convergence of manufacturing and services is a key for structural advancement in the era of new technologies. Obviously, as manufacturing technology and production are standardized, it is difficult to secure international competitiveness through traditional manufacturing alone and the role of R&D, design, logistics, and marketing is becoming more important.

• Journal of Powder Materials
• /
• v.29 no.4
• /
• pp.320-324
• /
• 2022

Lightweight steel is a crucial material that is being actively studied because of increased carbon emissions, tightening regulations regarding fuel efficiency, and the emergence of UAM, all of which have been recently labeled as global issues. Hence, new strategies concerning the thickness and size reduction of steel are required. In this study, we manufacture lightweight steel of the Fe-Mn-Al-C system, which has been recently studied using the DED process. By using 2.8 wt.% low-Mn lightweight steel, we attempt to solve the challenge of joining steel parts with a large amount of Mn. Among the various process variables, the laser scan power is set at 600 and 800 W, and the laser scan speed is fixed at 16.67 mm/s before the experiments. Several pores and cracks are observed under both conditions, and negligibly small pores of approximately 0.5 ㎛ are observed.