• Journal of Korea Multimedia Society
• /
• v.4 no.6
• /
• pp.570-578
• /
• 2001

Boundary scan architecture test methodology was introduced to facilitate the testing of complex printed circuit board. The boundary scan architecture has a tremendous potential for real time monitoring of the operational status of a system without interference of normal system operation. In this paper, a new type of embedded controller for real time monitoring of the operational status of a system is proposed and designed by using boundary scan architecture. The proposed real time monitoring embedded controller consists of test access port controller and an embedded controller proposed real time monitoring embedded controller using boundary scan architecture can save the hard-wire resource and can easily interface with boundary scan architecture chip. Experimental results show that the real time monitoring using proposed embedded controller is more effective then the real time monitoring using host computer.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.05a
• /
• pp.219-222
• /
• 2006

임베디드 소프트웨어는 IT기술의 발달과 하드웨어의 다양한 보급 등으로 인해 널리 사용되기 시작했으며, 일반적인 소프트웨어와는 다른 방식으로 제작되며, 절대 표준이 없기 때문에 다양한 방식으로 개발되고 있다. 임베디드 소프트웨어 품질 및 생산성을 위해서는 체계적인 테스팅 방법론이 요구된다. 기존의 테스팅 방법으로는 복잡하고 높은 수준의 임베디드 소프트웨어 기능들을 테스트하는데 한계점이 많다. 본 논문에서는 기존 소프트웨어 테스팅과 임베디드 소프트웨어 테스팅의 차이점을 제시하고 효율적인 임베디드 소프트웨어 테스팅이 가능한 지원도구의 요구사항과 전형적인 방법을 탈피하여 자동화된 테스팅 방법 및 도구인 ESTE(Embedded Software Testing Environments)의 구조와 지원 기능을 제시하고자 한다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.13 no.1
• /
• pp.7-14
• /
• 1993

In order to analyze the stress distribution and stress concentration factors in composite materials, especially, in the short fiber of the reinforced composite materials by photoelastic method, it is necessary to develop the photoelastic model material having short fibers with arbitrary size and orientation. In this paper, the orthotropic photoelastic model material having short fibers for the transparent type photoelastic device was developed by the embedded corrosion fiber method. It was found that the model material was satisfactory to the properties of photoelastic model material, and also that the embedded corrosion fiber method can be employed for developing a model material with arbitrary size and direction to analyze the stress distribution and crack problems of composite materials.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.6
• /
• pp.539-547
• /
• 2010

In this study, characteristics of the fundamental longitudinal guided wave mode, L(0,1), which is a usual mode employed in the inspection of the above-ground pipe, of the buried pipe were numerically investigated considering property changes in the surrounding soil. Results showed that soil conditions are significantly affecting the attenuation of L(0,1) mode in the pipe embedded in soil. Especially, if the soil is partially saturated, the attenuation of L(0,1) mode is larger and is very similar regardless of the degree of water saturation in the surrounding soil. However, when the soil is fully saturated, the attenuation of L(0,1) mode is less and show different trend with its partially saturated counterparts.

• International Journal of Concrete Structures and Materials
• /
• v.8 no.3
• /
• pp.201-212
• /
• 2014

Sixteen reinforced concrete laboratory specimens were used to evaluate a number of corrosion prevention methods under an accelerated (6 months) testing program. The use of galvanic thermal sprayed zinc, galvanic embedded anodes, a tri-silane sealer, an acrylic coating, and an epoxy/polyurethane coating was evaluated. The specimens received various treatments prior to exposure to accelerated corrosion. The performance of the treatments was evaluated with respect to corrosion currents, chloride ingress, extent of cracking, severity of rust staining, and visual inspection of the reinforcing steel after the conclusion of testing and dissection. Results indicated that the tri-silane sealer, the conjoint use of galvanic thermal sprayed zinc and epoxy/polyurethane coating, the epoxy/polyurethane coating, and acrylic coating performed better than the other methods tested. Higher chloride concentrations were measured in the vicinity of embedded zinc anodes.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.279-282
• /
• 2005

기존의 임베디드 소프트웨어 테스팅은 하드웨어 지원을 필요로 하거나, 단순한 인터페이스로 제공되는데 반해, 최근의 임베디드 시스템은 복잡하고 높은 수준의 기능을 요구함으로써 기존의 테스팅을 그대로 적용하는 것은 매우 비효율적이다. 그러므로, 상세한 지식 없이도 사용 가능하고, 자동적으로 주어진 단계의 시뮬레이션을 수행하고 유효성을 확인하며, 분석의 원활한 수행을 위한 자동화 도구가 필요하게 되었다. 본 논문에서는 기존 기술과의 차이점을 제시하고, 임베디드 테스팅 작업이 용이한 임베디드 소프트웨어 자동 테스팅 기술을 개발하는 것을 목표로 한다. 이를 위해 임베디드 소프트웨어 테스팅 지원 도구의 요구사항을 분석하고, 테스팅 도구 ESTE(Embedded Software Testing Environments)의 전체 시스템 구조를 제시하고자 한다.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.9 no.4
• /
• pp.211-217
• /
• 2014

Cyber-Physical Systems(CPS) that mostly provides safety-critical and mission-critical services requires high reliability, so that system testing is an essential and important process. Hardware-In-the-Loop Simulation(HILS) is one of the extensively used techniques for testing hardware systems. However, most conventional HILS has problems that it is difficult to support a distributed operating environment and to reuse a HILS platform. In this paper, we introduce EcoHILS(ETRI CPS Open Human-Interactive hardware-in-the-Loop Simulator) in order to test CPS effectively. Moreover, feasibility tests and performance tests of EcoHILS are performed to confirm its effectiveness.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.318-321
• /
• 2010

임베디드 소프트웨어를 테스트하고 디버깅하려면 기능 분석, 프로세스 추적, 메모리 디버깅 등 다양한 기술들이 존재한다. 하지만 테스터가 임베디드 시스템 내부의 컴포넌트들의 사이에 결함을 발견하고 그 위치를 찾아야 하는 경우, 디버깅 기술과 도구만으로는 한계가 있다. 만약 테스터가 테스트 도구를 이용할 경우 이런 단점을 보완할 수 있지만 다양한 임베디드 시스템 환경에서는 테스트 환경만을 구축하는 데도 많은 노력과 시간이 소요된다. 따라서 이러한 문제 해결하기 위하여 본 논문에서는 관점 지향 프로그래밍(Aspect-Oriented Programming)을 사용한 후크(Hook) 개념을 적용하여 새로운 테스팅 아키텍처를 제안한다.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.19 no.2
• /
• pp.115-121
• /
• 2024

Each ADS must have a validation and evaluation scenario for ODD. This requires a large number of scenarios, so a scenario library must be developed. In order to effectively utilize the scenario library, a system that supports testing in the ODD of the user's choice is required. In other words, in order to develop a scenario library, it is necessary to build a database on actual driving road conditions (geometry, etc.). Accordingly, in this study, we establish a domestic driving environment database based on HD-Map for driving safety testing, design a system that can search test target sections in connection with the ODD of the scenario, and present the implementation results. In the future, it is expected that the domestic driving environment database will be able to create scenarios through linking with the scenario library and directly utilize them for scenario-based evaluation of various demand sources.

• Journal of Korea Multimedia Society
• /
• v.12 no.2
• /
• pp.231-243
• /
• 2009

Currently interests of embedded software in various areas such as automotive field, ship field, robot field is increasing according to expand market of embedded systems. Various researches such as embedded operating systems, embedded software modeling technique, embedded software testing, and so on are going in progress. However systematic engineering approach in embedded system development is poor because embedded areas focus on hardware parts until now. Furthermore, framework-based de sign technique considering reusability is not reflected in embedded system development. Those development results in many of dead codes scattered in system, and results in poor reusability of system. This paper suggests a framework of embedded system for reusability and a static meta-model for reuse framework. Proposed meta-model expresses not only the structure of reuse framework, but also allows a designer to extend and design easily models of embedded system based on reuse framework according to various embedded system types.