• Journal of the Korea Convergence Society
• /
• v.13 no.4
• /
• pp.53-61
• /
• 2022

Accidents are steadily occurring due to machine defects and carelessness during LNG storage operations. In previous studies, an environmental sensor module capable of measuring pressure, temperature, gas concentration, and flow to detect danger in advance was developed and the response speed according to the amount of leaked gas was measured. This paper proposes the development of a wired and wireless communication module that transmits data measured by the environmental sensor module to embedded devices connected to wired and wireless networks of SPI, UART, and LTE. First, a data communication module capable of interworking with an environmental sensor is designed. Design a protocol between devices in the Local Control Part and wired and wireless protocols in the Local Control Part and Remote Control Part. Ethernet, WiFi, and LTE communication modules were designed, and UART and SPI channels that can be linked with embedded controllers were designed. As a result, it was confirmed through a UI (User Interface) that each embedded device transmits data measured by the environmental sensor module while simultaneously communicating on a wired and wireless basis.

• Transactions of the Society of Information Storage Systems
• /
• v.7 no.1
• /
• pp.7-12
• /
• 2011

The flash memory has been remarked as the next generation media of portable and desktop computers' storage devices. Their features include non-volatility, low power consumption, and fast access time for read operations, which are sufficient to present flash memories as major data storage components for desktop and servers. The purpose of our study is to upgrade a traditional mirroring scheme based on SSD storages due to the relatively slow or freezing characteristics of write operations, as compared to fast read operations. For this work, we propose a new storage management scheme called Memory Mirror-Switching based on traditional mirroring scheme. Our Mirror-Switching scheme improves flash operation performance by switching write-workloads from flash memory to RAM and delaying write operations to avoid freezing. Our test results show that our scheme significantly reduces the write operation delay and storage freezing.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.6
• /
• pp.781-792
• /
• 2016

This paper presents a new approach to enhance the data retention of logic-compatible embedded DRAMs. The memory bit-cell in this work consists of two logic transistors implemented in generic triple-well CMOS process. The key idea is to use the parasitic junction capacitance built between the common cell-body and the data storage node. For each write access, a voltage transition on the cell-body couples up the data storage levels. This technique enhances the data retention and the read performance without using additional cell devices. The technique also provides much strong immunity from the write disturbance in the nature. Measurement results from a 64-kbit eDRAM test chip implemented in a 130 nm logic CMOS technology demonstrate the effectiveness of the proposed circuit technique. The refresh period for 99.9% bit yield measures $600{\mu}s$ at 1.1 V and $85^{\circ}C$, enhancing by % over the conventional design approach.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.6
• /
• pp.345-351
• /
• 2012

In traditional target-based data deduplication system, all of the files should be chunked and compared for reducing duplicated data blocks. One of the critical problem of this system arises as the number of files are increasing. The system suffers from computational delay for calculating hash value and processing metadata for handling each file. To overcome this problem, in this paper, we propose a novel data deduplication system using logical partition of storage system. The system applies data deduplication scheme to each logical partition not each file. Experiment result shows that the proposed system is more efficient compared with traditional deduplication scheme where the logical partition is full of files by 50% in terms of deduplication capacity and processing time.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.3
• /
• pp.177-184
• /
• 2017

High performance non-volatile memory system can mitigate the gap between main memory and storage. However, no single memory devices fulfill the requirements. Non-volatile Dual In-line Memory Module (NVDIMM) consisted of DRAMs and NAND Flashes has been proposed to achieve the performance and non-volatility simultaneously. When power outage occurs, data in DRAM is backed up into NAND Flash using a small-size external energy storage such as a supercapacitor. Backup and restore operations of NVDIMM do not cooperate with the operating system in the NVDIMM standard, thus there is room to optimize its operation. This paper analysis the operation of NVDIMM and proposes a method to reduce backup and restore time. Particularly, data compression is introduced to reduce the amount of data that to be backed up and restored. The simulation results show that the proposed method reduces up to 72.6% of backup and restore time.

• Journal of Information Technology Applications and Management
• /
• v.12 no.1
• /
• pp.125-140
• /
• 2005

Nowadays, we have many embedded systems which store and process multimedia data. For multimedia systems using hard disks as storage media such as DVR, existing file systems are not the right choice to store multimedia data in terms of cost. performance and reliability. In this study we designed a reliable file system with very high performance for embedded multimedia applications. The proposed file system runs with quite simple disk layout to reduce time to initialize and to recover after power failures, uses a large data block to speed up the sequential accesses, incorporates a time-based indexing scheme to improve the time-based random accesses and boosts reliability by backing up the important meta data on a small NVRAM. We implemented the file system on a Linux-based DVR and verified the performance by comparing with existing file systems.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.3
• /
• pp.139-147
• /
• 2017

In recent years, non-volatile memory express (NVMe), a new host controller interface standard, has been adapted to overcome performance bottlenecks caused by the acceleration of solid state drives (SSD). Recently, performance breakthrough cases over AHCI based SATA SSDs by adapting NVMe based PCI Express (PCIe) SSD to servers and PCs have been reported. Furthermore, replacing legacy eMMC-flash storage with NVMe based storage is also considered for next generation of mobile devices such as smartphones. The Linux kernel includes drivers for NVMe support, and as the kernel version increases, the implementation of the NVMe driver code has changed. However, mobile devices are often equipped with older versions of Android operating systems (OSes), where the newest features of NVMe drivers are not available. Therefore, different features of different NVMe driver implementations are not well evaluated on Android OSes. In this paper, we analyze the response time of the NVMe driver for various Linux kernel version.

• The KIPS Transactions:PartD
• /
• v.15D no.2
• /
• pp.257-262
• /
• 2008

This paper describes the implementations of the application service based on embedded Linux; Personal Audio Recorder (PAR) which uses WiBro network for data communications and CDMA network for voice communications. At PAR, when PAR client starts voice recording on a dual-mode terminal, the CDMA voice data of caller and callee is transmitted to storage server located in the Internet through WiBro network. Then, PAR server stores voice data on storage server according to the call number and call time. In case of shortage of storage space on terminal, PAR makes user to store voice data. And, PAR can search a catalog of stored data on server and play the specific content.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.259-262
• /
• 2002

In this paper, we present a hard disk drive embedded digital satellite receiver with scene change detection for video indexing. This receiver can store, retrieve and classify the broadcast data by implementing an interface between the conventional digital satellite receiver and digital storage media. Using this system, user can obtain more information for efficient video retrieval.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.157-159
• /
• 2007

The conventional hard disk has been the dominant database storage system for over 25 years. Recently, hybrid systems which incorporate the advantages of flash memory into the conventional hard disks are considered to be the next dominant storage systems to support databases for desktops and server computers. Their features are satisfying the requirements like enhanced data I/O, energy consumption and reduced boot time, and they are sufficient to hybrid storage systems as major database storages. However, we need to improve traditional index node management schemes based on B-Tree due to the relatively slow characteristics of hard disk operations, as compared to flash memory. In order to achieve this goal, we propose a new index node management scheme called FNC-Tree. FNC-Tree-based index node management enhanced search and update performance by caching data objects in unused free area of flash leaf nodes to reduce slow hard disk I/Os in index access processes.