• FLOWER RESEARCH JOURNAL
• /
• v.19 no.2
• /
• pp.89-95
• /
• 2011

This study was conducted to improve commercial quality of cut spray chrysanthemums 'Charming Eye' and 'Pink Pride' bred in Korea by foliar application of daminozide, suppressing excessive elongation of peduncle caused by high temperature in greenhouse. Applications were made at two floral-bud-developmental stages and concentrations used were 0, 500, 1000, and $2000mg{\cdot}L^{-1}$. As for 'Charming Eye', cut flower length, peduncle diameter, stem diameter, flower bud diameter, and the number of flower buds did not show any significant difference among all treatments including control. However, the suppressing effect of peduncle elongation, widening angle of flower cluster arrangement on apical part, and increasing parallel flower buds in stage I showed better than those in stage II regardless of daminozide concentration. As for 'Pink Pride', cut flower length, peduncle diameter, and stem diameter did not show any significant difference among all treatments including control but angle of flower cluster on apical part increased compared to control as daminozide was sprayed at stage I and II except $2,000mg{\cdot}L^{-1}$ daminozide-sprayed at stage II. The number of flower buds and flower bud diameter showed the greatest increment through $1,000mg{\cdot}L^{-1}$ daminozide-sprayed at stage I and did the least values as sprayed with $2,000mg{\cdot}L^{-1}$ daminozide at stage II. Daminozide also gradually reduced peduncle length in a concentration-dependant manner but elongation of peduncle foliar-sprayed at stage I showed the more suppressing effect than that at stage II. Increasing the number of parallel flower buds showed the best results when sprayed with $2,000mg{\cdot}L^{-1}$ at stage I. In conclusion, we recommended that foliar spraying with $500-1,000mg{\cdot}L^{-1}$ daminozide at stage I and foliar spraying with $1,000-2,000mg{\cdot}L^{-1}$ daminozide at stage I improved cut flower quality of 'Channing Eye' and 'Pink Pride', respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.6
• /
• pp.1253-1261
• /
• 1998

Effects of dietary cholesterol and taurine supplementation on hepatic total and phospholipid fatty acid compositions were evaluated in rats fed one of the following semisynthetic diets for 5 weeks : control diet(CD, cholesterol free and taurine free diet); high cholesterol diet(HCD, CD＋1.5% cho lesterol); high cholesterol, high taurine diet(HCHTD, HCD＋1.5% taurine). Diet induced changes in hepatic total fatty acid compositions were very similar to those in hepatic phospholipid fatty acid compositions. The HCD significantly decreased the percentage of total saturated fatty acids(SFA), and increased the percentage of total monounsaturated fatty acids(MUFA) of hepatic total lipids and phospholipids as compared to the values for the control rats(p<0.001). HCHTD significantly elevated the percentage of $\Sigma$SFA and lowered the percentage of $\Sigma$MUFA compared to the values for the HCD(p<0.001). Percentages of hepatic total and phospholipid 18:3$\omega$3, 20:5$\omega$3, 18:2$\omega$6 and 20:3$\omega$6 were significantly higher in rats fed the HCD than the values for the control rats, and the percentages of their elongation and desaturation products(22:5$\omega$3, 22:6$\omega$3, 20:4$\omega$6, 22l:4$\omega$6 and 22: 5$\omega$6) were significantly lower in rats fed the HCD compared to those for the control rats. HCD significantly lowered the Δ5 desaturation(20:3$\omega$6⇒20:4$\omega$6) and Δ4 desaturation(22:4$\omega$6⇒22:5$\omega$6) indices, and the elongation index of $\omega$3 fatty acid(20:5 $\omega$3⇒22:5$\omega$3) in rat liver. HCHTD reversed the cholesterol induced changes in the compositions of $\omega$3 and $\omega$6 fatty acids. These results suggest the possibility that dietary cholesterol and taurine supplementations affect plasma and liver lipid levels, at least in part, by changing the hepatic phospholipid fatty acid compositions and thereby modulating the physical characteristics of the membrane and the activities of microsomal enzymes involved in lipid metabolism.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.372-378
• /
• 1998

Two types of formaldehyde-treated soy protein isolate (SPI) films, formaldehyde-incorporated and formaldehyde-adsorbed films, and control SPI films were prepared. Cross-linking effect of formaldehyde on selected film properties such as color, tensile strength (TS), elongation at break (E), water vapor permeability (WVP), and water solubility (WS) were determined. Physical properties of formaldehyde-incorporated films were not geneally different from those of control films, while almost all of those among formaldehyde-adsorbed films were significantly different. Through cross-linking development within formaldehyde-adsorbed films, WS decreased significantly (P<0.05) from 26.1% to 16.6%, and TS increased two times while E decreased two times compared with control films. This was caused by insolubilization and hardening of protein by cross-linking most likely attributed to the significant changes in properties of protein films reacted with formaldehyde.

• The Plant Pathology Journal
• /
• v.22 no.2
• /
• pp.168-173
• /
• 2006

To develop the diagnostic method for the viral infection in apple, the partial genes corresponding to the N-terminal region of RNA polymerase of Apple stem grooving virus (ASGV) and coat protein of Apple chlorotic leaf spot virus (ACLSV) were characterized from the infected apple cultivars in Korea. Based on the nucleotide sequences of the characterized partial genes, the virus gene-specific primers were designed for the detection of ASGV and ACLSV infected in species of Malus. The RT-PCR using the primers for the genes of ASGV and ACLSV successfully gave rise to 404 and 566 bp DNA fragments, respectively. Using those viral gene-specific primers, the multiplex RT-PCR assays were also established to diagnose the mixed infection by ASGV and ACLSV simultaneously. Furthermore, the control primers, which have to be included for the RT-PCR as an internal control, were designed using the nucleotide sequence of the gene encoding elongation factor $1{\alpha}(EF1{\alpha})$. This multiplex RT-PCR including the control primers provides more reliable, rapid and sensitive assay for the detection of ASGV and ACLSV infected in Korean apple cultivars.

• Korean Journal of Metals and Materials
• /
• v.47 no.7
• /
• pp.391-396
• /
• 2009

Tensile, low cycle fatigue, and fatigue crack growth rate tests were conducted at RT and $300^{\circ}C$ for type 304 stainless steel. Tensile was tested under displacement control and low cycle fatigue was tested under strain control. Fatigue crack growth rate test was conducted under load control and crack was measured by DCPD method. Yield strength and elongation decreased at $300^{\circ}C$. Dynamic strain aging was not detected at $300^{\circ}C$. Low cycle fatigue life increased but fatigue strength decreased at $300^{\circ}C$. Fatigue crack growth rate increased at $300^{\circ}C$. Dislocation structures were mixed with cell and planar and did not change with temperature. Grain size did not change but plastic strain increased at $300^{\circ}C$. Strain induced martensite after low cycle fatigue test increased at RT but decreased at $300^{\circ}C$. It was concluded that the increase of low cycle fatigue life at $300^{\circ}C$ was due to the decrease of strain induced martensite at which crack was initiated.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.2
• /
• pp.139-149
• /
• 2011

A cable structures have the advantage that cover a large space without column but it is very sensitive to deal with shape control because of its flexibility. Especially, location of control member and needed elongation of member are important things. Therefore, the purpose of this paper is studied on displacement control technique for pre-stressed cable structures by force method considering order of control. The layout of this paper is as follows. Firstly, in section 2, the control technique by force method for cable structures is given. Secondly, section 3 briefly introduces simple cable net in order to apply control technique considering ordering of actuator. Finally, more complex example for effective member and the conclusion are in section 4 and 5, respectively.

• KCI Concrete Journal
• /
• v.13 no.2
• /
• pp.42-48
• /
• 2001

The bend resistance of coated reinforcing bar is greatly influenced by both the adhesion strength between bar and coating materials, and the followed transformation of coating material as bars bend. Especially, tearing state or partial microscopic cracks are predicted on the inside and outside of bending angle, because tensile strength and elongation of polymer film are very different according to types of polymer dispersions in bar coating, and these damaged parts are rapidly corroded by penetration of corrosive factors. In this study, polymer cement slurry coated reinforcing bars with various polymer dispersions are prepared by following combined conditions, polymer-cement ratio of 50% and 100%, coating thickness of 250$\mu$m and 450$\mu$m, coating number, curing age of 3, 7, 14 and 28days. Then the specimens are tested for working life and bend resistance at bending angles $90^{\circ}$, $135^{\circ}$and $180^{\circ}$ to observe the microscopic damage effect as the bars bend. Also, epoxy-coated reinforcing bars for control experiment were used with 250$\mu$m of coating thickness. The tensile strength for polymer films is performed. From the test results, the working life of the polymer cement slurry is within 90 seconds. Among four types of polymer dispersion, polymer cement slurry coated reinforcing bar using St/BA-1 emulsion has the excellent bend resistance, which is remarkably improved than that of epoxy-coated reinforcing bar. And the bend resistance is more related to elongation than tensile strength of polymer film. Polymer cement slurry with a polymer-cement ratio of 100%, a coating thickness of $450\mu$m and one coating using St/BA emulsion is selected as a most suitable coating material for coated reinforcing bar.

• Korean Journal of Optics and Photonics
• /
• v.21 no.5
• /
• pp.195-199
• /
• 2010

A broadband optical coupler with a broad bandwidth of 1000 nm based on a photonic crystal fiber (PCF) is investigated. The PCF has 6 layers of air hole structures and a diameter of $130{\mu}m$. The PCF-based coupler is fabricated by using a fused biconical tapering method based on heating and elongation processes. Changing temperature and an elongation length can control the bandwidth and the bandedge wavelength of the PCF-based broadband coupler. The diameter of the fused region in the PCF-based coupler was measured to be $23{\mu}m$. The fabricated PCF-based coupler has a nearly-flat coupling ration of 3-dB in a broad bandwidth of 1000 nm, which is wider than that of the previously reported PCF-based coupler and that of the single-modefiber-based coupler. Since the resolution of optical coherence tomography system is proportional to the bandwidths of both an optical light sources and an interferometer, the fabricated PCF-based broadband optical coupler has a great potential for realization of a broadband interferogram.

• Journal of the Korea Convergence Society
• /
• v.11 no.8
• /
• pp.223-228
• /
• 2020

The need to steadily manage healthy hair for a beautiful hairstyle is emerging, and it is time to develop hair cosmetics using natural antioxidants that are harmless to the human body according to the needs of the times. Therefore Max. Load, Max. Stress, Max. Elongation, and breakage on the hair coated with the extract of Ginkgo biloba L. According to the Break Load, Break Stress, Break Elongation, Max. Various convergence property experiments such as modulus and Tangential modulus values were conducted. As a result of research, the hairs coated with Ginkgo biloba extract had an overall increase in intrinsic properties including tensile strength compared to the control group. Through this study, we intend to study the potential of Ginkgo biloba L. as a useful material for hair cosmetics such as permanent wave preparations as well as health supplements and medicines that have been released, and we expect that it will be provided as useful research data for the subsequent development of various hair cosmetics.

• BMB Reports
• /
• v.45 no.4
• /
• pp.227-232
• /
• 2012

In vertebrates, there are two variants of eukaryotic peptide elongation factor 1A (eEF1A; formerly eEF-$1{\alpha}$), eEF1A1 and eEF1A2, which have three well-conserved domains ($D_I$, $D_{II}$, and $D_{III}$). In neurons, eEF1A1 is the embryonic type, which is expressed during embryonic development as well as the first two postnatal weeks. In the present study, EGFP-tagged eEF1A1 truncates were expressed in cortical neurons isolated from rat embryo (E18-19). Live cell images of transfected neurons showed that $D_{III}$-containing EGFP-fusion proteins (EGFP-$D_{III}$, -$D_{II-III}$, -$D_{I-III}$) formed clusters that were confined within somatodendritic domains, while $D_{III}$-missing ones (EGFP-$D_I$, -$D_{II}$, -$D_{I-II}$) and control EGFP were homogeneously dispersed throughout the neuron including axons. In dendrites, EGFP-$D_{III}$ was targeted to the heads of spine- and filopodia-like protrusions, where it was colocalized with $SynGAP{\alpha}$, a postsynaptic marker. Our data indicate that $D_{III}$ of eEF1A1 mediates formation of clusters and localization to spines.