• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.2
• /
• pp.203-244
• /
• 1998

The human mandible is always under the condition of loading by the various forces extorted by the attached muscles. The loading is an important condition of the stomatognathic system. This condition is composed of the direction and amount of forces of the masticatory muscles, which are controlled by the neuromuscular system, and always influenced by the movement of both opening and closing. Mandible is a strong foundation for the teeth or various prostheses, nevetheless it is a elastic body which accompanies deformation by the external forces on it. The elastic properties of the mandible is influenced by the various procedures such as conventional restorative treatments, osseointegrated implant treatments, reconstructive surgical procedures and so forth. Among the treatments the osseointegrated implant has no periodontal ligaments, which exist around the natural teeth to allow physiologic mobility in the alveolar socket. And so around the osseointegrated implant, there is almost no damping effect during the transmission of occlusal stress and displacements. If the osseointegrated implants are connected by the superstructure for the stabilization and effective distribution of occlusal stresses, the elastic properties of mandible is restricted according to the extent of 'splinting' by the superstructure and implants. To investigate the change of elastic behaviour of the mandible which has osseointegrated implant prosthesis of various numbers of implant installment and span of superstructre, a three dimensional finite element model was developed and analyzed with conditions mentioned above. The conclusions are as follows : 1. The displacements are primarily developed at the area of muscle attachment and distributed all around the mandible according to the various properties of bone. 2. The segmentation in the superstructure has few influence on the distribution of stress and displacement. 3. In the load case of ICP, the concentration of tensional stress was observed at the anterior portion of the ramus($9.22E+6N/m^2$) and at the lingual portion of the symphysis menti($8.36E+6N/m^2$). 4. In the load case of INC, the concentration of tensional stress was observed at the anterior portion of the ramus($9.90E+6N/m^2$) and the concentration of tensional stress was observed at the lingual portion of the symphysis menti($2.38E+6N/m^2$)). 5. In the load case of UTCP, the relatively high concentration of tensional stress($3.66E+7N/m^2$) was observed at the internal surface of the condylar neck.

• Journal of Life Science
• /
• v.28 no.12
• /
• pp.1432-1437
• /
• 2018

Clara cell secretory protein (CCSP) plays an important role in protecting the lungs from inflammation. This research focuses on identifying the cis-element for binding the repressor of CCSP gene expression. A DNase I footprinting experiment revealed three protected regions between -812 and -768 bp (45 bp) of the mCCSP promoter. One motif (D3: GCCTGGGAA) was 100% conserved across rat, hamster, and human. The addition of excess amounts of the D3 motif exhibited high competition within that 45 bp range in an electrophoretic mobility shift assay. However, when mutated D3 ($G{\underline{AA}}TG{\underline{TT}}AA$) was used, the competition was significantly reduced. This demonstrates that the D3 motif within that 45 bp region of the mCCSP promoter is an important site for the protein-DNA interaction. Transient transfection assays with -756 Luc resulted in highly decreased expression of CCSP than those with -812 Luc, suggesting that the 45 bp could function as a binding site for the repressor. Co-transfection of KLF4 exhibited significant repression of the -812 Luc but not the -768 Luc which clearly shows that KLF4 might function as a repressor for the CCSP gene and also suggests that the D3 motif is strongly involved in the binding of KLF4. In addition, when anti-KLF4 antibody was added, super-shifted bands were observed. This result demonstrates that KLF4 could function as a repressor by binding to this 45 bp region of the CCSP promoter and that the D3 motif might be involved in the specific binding of KLF4.

• Journal of the Korean Geographical Society
• /
• v.28 no.1
• /
• pp.40-57
• /
• 1993

This paper aims to show the various aspects of migration in Kwangju merropolitan area, southwestern Korea, for a period of years 1980-1985. Migratory patterns are spatially extensive in countryside around Kwanfju, and due to high accessibility to the metropolitan area urban implosion emerges in the city. In Chonnam province where Kwangju is loca-ted, all cities and counties except for such in-dustrial areas as Yochon, and Kwangyang are experiencing population losses in terms of net migration by survival rate methods. Kwangju is the exceptionally one of in-migration areas in Chonnam, though its central part(Dong-Gu) is also an out-migrated area. Predominantly in-migration urban areas have high proportions of a student age group between 15-19 years, and that reflects the importance of the educational factor in migration analysis. The municipal authorities of Kwangju are planning to block the way of the middle sxhool students who live in the outskirts of Kwangju to entrance to high school in the city. Thant may stir up migrations into Kwangju for the elementary and middle school students, because the city id expected to provide educational opportunities higher and better than remaining Chonnam areas. Population of Kwangju would, therefore, grow as the students migrate into the city. The findings on the residential intra-city movement in selected 5 Dongs indicate that implications of a short-distance movement re noteworthy; neighbour to neighbour, and the nearest stop in the way from the outer Kwangju as well. Trends in a short-distance movement are in accord with Ravensteins's "law of migra-tion". But in casw of the inter-provincial migra-tion to Kwangju, the number of in-migrants from remoter Seoul is more than that from nearer Chonbuk province. Therefore it supports the fact that the movement between capital region and far off local cities overcomes a distance barrier. The temporary mobility for a day has been increased as the standard of living has improved and it reaches a peak on weekend or on con-secutive holidays. The number of temporal movers to Kwangju from capital region and Yongnam area, southeastern Korea has a greatincrease in terms of the frequency of the passengers' mobility, in particular on Myongjol(the ethnic and traditional festival day) in com-parison with on weekdays. By comparison with two largest Myongjols, the number of movers is more on Chusok(The Full Moon festival on lunar August) than on Sol (lunar new year's day). Annual peak point of weekday movers appears in August because of summer vacation. But the lowest one appears in June, which is related to the busy farming season. A patients' move for medical services in on the increase with a change of living conditions. It is especially true in the industrial counties such as Kwangyang and Yochon. By way of conclusion, it should be pointed out that one of the problems we face in survey of migration volume by the survival rate method is that the survival rate somtimes exceeds the value 1.0, in normal states of which should be under 1.0. it may be due to the shortcoming from the census statistics. We should not give therefore too much stress on the importance of migrations or moves as an element of changes in spatial pattern. In cinclusion, the results of the study show some geographic facts as the followings: 1. One of the outstanding phenomena in all types of movement is the seletivity of ages. The most important factors are related to education and employment. 2. Short-distance movement is carried out in accordance with Ravenstein's law, but in case long-distance movement, in-migration from capital region is prominent in spite of remoten-ces. The gravity between large cities such as Kwangju and Seoul, which has a frequent human movenent, causes urban implosion of small cities between those cities. 3. The temporary mobility for a day, in con-trast to that of permanent movement, is more related to transportation, and its volumes and annual variations are a large-scale. 4. Passengers' mobility is high in industrial cities. And the scope of patients' mobility is narrower than passengers'.

• Economic and Environmental Geology
• /
• v.41 no.6
• /
• pp.695-708
• /
• 2008

In order to evaluate the geochemical behaviors of elements with waste rocks in the abandoned Jangpoong Cu mine area, total concentration analysis and leaching experiments were performed. The content of elements within waste rocks compared with background values decreased in order of As>>Cu>Pb>Cd>Co. Leaching experiments were carried out at various extraction environments, considering the acid rain ($0.00001{\sim}0.001N\;HNO_3$) and the acid mine drainage ($0.001{\sim}0.1N$ HNO3). After 24 hours of reaction with different acidic solution, the leaching characteristics of waste rocks were classified into three types according to final pH of leaching solution. Type I refers to the case that the final pH of leaching solution was lower than that of the reaction solution due to the dissolution of acidic minerals from rocks, while type 2 and 3 refer to the case that the final pH maintained higher than that of the reaction solution. Theses types include in acid buffering minerals such as clay minerals and carbonate minerals. The leaching characteristics of the elements after the reaction could be categorized into As-Co-Fe, Cu-Mn-Cd-Zn, and Pb. As-Co-Fe started to get leached under 2.5 of pH regardless of changes in the final pH, and Cu-Mn-Cd-Zn showed different initial leaching pH according to the types of final pH changes. Based on the pH value where leaching started regardless of leaching concentration, the relative mobility of each element was in the order of Mn Zn>Cd>Cu>>Fe Co>As>Pb. Thus, more higher mobility elements(Zn, Mn and Cu) were leached by reacting with acid rain water. Acid mine drainage may result in distributions of elements having relatively less mobility(As, Fe, Co and Pb).

• Journal of the Korean Ceramic Society
• /
• v.38 no.9
• /
• pp.853-859
• /
• 2001

The dispersion stability of nano $Y_2O_3-CeO_2$ system was investigated using colloid surface chemistry. Green body of $Y_2O_3$ doped $CeO_2$ was prepared by slip casting in and aqueous system. The dispersion stability of suspension between powders and organic additive was accomplished through electrokinetic behavior of suspension, which was done by ESA apparatus. The dynamic mobility of particles was enhanced when the anionic dispersant of the amount of 1wt% was added. The dissolution of $Y^{3+}$ ion in suspension occurred in the acidic region so that pH value in slurries did not move to below 7.0. In the $CeO_2-Y_2O_3$ system, optimal preparation of suspension was made after adding the anionic dispersant as the amount of 1wt% and pH value of 11.0, and then slip-cast and sintered at 1400$^{\circ}$C, 2 hrs. It appeared relative density of >98% and homogeneous distribution of Y element in depth direction as well as in the microstructure of surface.

• Molecules and Cells
• /
• v.26 no.5
• /
• pp.496-502
• /
• 2008

Cryparin, encoded as a single copy gene (Crp) of the chestnut blight fungus Cryphonectria parasitica, is the most abundant protein produced by this fungus. However, its accumulation is decreased remarkably in C. parastica strains containing the double-stranded (ds) RNA virus Cryphonectria hypovirus 1. To characterize the transcriptional regulatory element(s) for strong expression and viral regulation, promoter analysis was conducted. Serial deletion of the Crp promoter region resulted in a step-wise decrease in promoter activity, indicating a localized distribution of genetic elements in the cryparin promoter. Promoter analysis indicated two positive and a repressive cis-acting elements. Among them, the promoter region between nt -1,282 and -907 appeared to be necessary for hypoviral-mediated down-regulation. An electrophoretic mobility shift assay (EMSA) on the corresponding promoter region (-1,282/-907) indicated two regions at (-1,257/-1,158) and (-1,107/-1,008) with the characteristic AGGAGGA-N42-GAGAGGA and its inverted repeat TCCTCTC-N54-TCCTCCT, respectively, appeared to be specific binding sites for cellular factors.

• Journal of the Korean housing association
• /
• v.17 no.4
• /
• pp.145-153
• /
• 2006

Ubiquitous space can be described as a combined space of physical space and digital space. Ubiquitous space possesses new possibilities by combining the two. The concept of ubiquitous home will bring new changes in residential space design. First of all, it makes possible for more convenient and secure home. It has to be developed along with city and town level changes as ubiquitous environment. Secondly, concept of extended space as an extension of living space becomes possible by linking with outside spaces. Thirdly, as consumer requirements for residential spaces will become more versatile by social changes, ubiquitous home can be a good means to meet these versatile consumer requirements by accommodating concept of multi-functional space and flexible space. It is quite important to predict user requirements in rapidly changing social environment and versatile personal inclinations. Instead of POE methodology which can analyze and evaluate in exiting types of designs, storytelling methodology can be used to predict and direct for future requirements of living. The methodology makes scenarios of space usage for future living and extracts design requirements for the living. The concept of intelligent space has to be introduced. It is different from digital home that only accomodate digital devices in space. In intelligent space, space itself has to be recognized as an identity that interacts human directly. Intelligent space recognize human requirements and control digital devices as a response. Multi-functional space is closely related with intelligent space that can changes for business, entertainments as well as for rests by user requirements instantly. Flexible space that also intends to meet requirements of mobility and versatility can be attained through the integration of digital technology into current physical mobile systems. Interaction design becomes integral part for ubiquitous space design along with physical design. For the residential space design, digital illiteracy has to be considered for interaction design. Instead of the concept of passive existence, space itself has to be recognized as active subsistence that reacts with human. Intuitive and natural interaction for human will be a key design element for space-human interface design.

• The Research Journal of the Costume Culture
• /
• v.23 no.4
• /
• pp.595-603
• /
• 2015

The influence of Japonism, which is the post-mid-$19^{th}$ century phenomenon of appreciating and preferring the Japanese style that manifested all across Western art, started to grow as a result of the active open-door policy of Japan at this time. As all areas of Japanese arts and culture, such as paintings, sculptures and theater plays, influenced Europe and America, this influence developed into a cultural phenomenon that was reflected even in fashion. The characteristic elements of the kimono first expanded from Paris and showed a similar silhouette to that of the traditional kimono in the early $20^{th}$ century, but towards the middle and the end of the century, kimono sleeves that were connected as one piece without a connecting seam line between the sleeve and bodice started to appear. The foundation of this research focuses on the design characteristics of kimono sleeves that can be seen in $20^{th}$-century fashion, and five varying kimono sleeve jackets and coats based on these formative characteristics were designed. Each design had a gusset design added, which improved the external and mobility problems inherent in kimono sleeve patterns, while at the same time serving as a proposal for new design element applications. Additionally, through various changes to and attempts at designs using the kimono sleeve as a limiting factor, new design possibilities were explored.

• Economic and Environmental Geology
• /
• v.37 no.1
• /
• pp.21-33
• /
• 2004

The objective of this study is to review of environmental assessment of heavy metals derived from various metalliferous mines in Korea. As a results of national wide research for heavy metal contaminations in the vicinity of metalleferous mines, the main contaminants are mine waste materials including tailings. From the materials, toxic elements including As, Cd, Cu, Pb and Zn can be dispersed into downstream through wind and water. Thus, soils around the mines contain elevated levels of those elements, which are over the guide values for environmental regulation of soils in Korea. Arsenic is one of the most important elements contaminated by mining activities, to a less extent, Cd, Cu, Pb and Zn. In spite of remediation works for some metal mines by the government, there are still lots of abandoned mines which are necessary for reclamation of mining sites. This study also includes that metal concentrations in soils and tailings can be varied upon various decomposition methods including 0.1N HC1 and aqua regia and sequential extraction scheme, with differences in each element, too. This may be due to geochemical characteristics of the elements, such as solubility, mobility and chemical forms in the geochemical environment. Finally, it is suggested that a certain organization should be runned by Korean government for management of abandoned mines.

• Journal of Environmental Policy
• /
• v.10 no.3
• /
• pp.49-71
• /
• 2011

Water is an essential element required for the survival of 6 billion human beings around the world, and it has limited mobility. The importance of water industry has grown considerably, as its forecasted market size is expected to increase from $336 billion in 2007 to $865 billion in 2025, respectively. In 2003, the domestic water market was estimated to be worth 11 trillion won. However, according to the estimates of this research, the result above was overestimated by 2 trillion won. The economic ripple effects of newly defined water industry based on the input-output data from 2000 to 2008 were trivial, as the price effects of water industry was considerably minor at only 0.12%. To successfully implement policies to enhance the water industry, the market price mechanism must operate and function properly. Nevertheless, the impact of water's market prices on the economy upon application is projected to be trivial.