• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.1
• /
• pp.45-52
• /
• 2020

This study analyzed the components contained in the pine needles of first and second-year-olds to analyze the factors that the in vivo content of inorganic elements affects the sex determination of pine trees. In response, the plan for pine tree plant and maintenance was intended to be presented in consideration of the reproductive environment and physiological characteristics. The results are as follows. First, last year, when there were many encyclopedias, the analyzed N(%) content was found to be high. The nitrogen content of the previous year's soil was found to affect the production of the spheres the following year. This is believed to be possible to reduce the rate of Pine pollen produced in the new plant in the following year through a dispute over quality consumption in the spring of the previous year. Second, the weapons elements involved in the Pine cones and the generation of the Pine pollen in the new plant appeared to be P(%), K(%), Ca(%), and Fe(%). However, the nutrients from the previous year's leaves of Ca(%) and Fe(%) were found to have a low influence on the sex determination of first-year pine trees. Because Ca(%) and Fe(%) are not able to move nutrients accumulated in aging organs due to the nature of the components, feeding nutrients in the fall when the growth of the previous year's branches is reduced is expected to affect oral generation. Third, pine trees are extremely positive and Pine pollen is related to the time of the northeast wind. Therefore, it is believed that it would be good to be located in the northern direction, where the sunlight is good, in an outdoor space. In addition, it is important to use vaginal consumer products in spring and carry out a quarrel involving Mg and Fe during fall to reduce the effect of the Pine pollen, which is an outdoor plant. This is an important part of maintaining and managing pine trees in outdoor spaces as well as the sex determination of pine trees. This study suggested that plant planning, which derives the correlation between pine inorganic element content on sexual determination and takes into account the physiological characteristics of pine trees, is an important issue in the creation of outdoor space. Follow-up research on other factors affecting pine tree sex determination is expected.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.1
• /
• pp.28-35
• /
• 2020

This study aims to analyze restoration techniques of traditional garden sites targeted Korean, Chinese, Japanese palace garden. Restoration was divided into the restore foundation and restore individual elements depending on the residual state of the actual garden features. And derived characteristics that should be considered by conservation techniques. The results are as follows; First, the Wanfo Pavilion Area in Beihai Park where the foundation and foundation stones were restored based on the relevant literature and comparative analysis. The Archaeological Site in Gwanbuk-ri, Buyeo restored only the remaining structures of the ponds, waterways and large buildings among the areas where the excavation was completed. The Second Daigokuden Garden in Heijokyo Palace restored building sites and foundation, and installed poles and piles so that the area of the Second Daigokuden Garden could be known. Second, Donggung Palace and Wolji Pond, Gyeongju where the restoration of individual elements was made, preemptively restored the remains of traditional gardens based on pond garden estuaries and feedbacks that were confirmed through initial excavation. Huanghuazhen Area in Yuanmingyuan Garden was restored based on Western copper plate prints and related records, but further data found after the restoration confirmed that it was restored differently than it is now. East Palace Garden in Heijokyo Palace covered existing features with soil and restored buildings on them. Typical garden elements such as landscape stone and waterways were preserved and exposed. Third, foundation restore is a case in which the base is identified through the current state of the traditional garden site, it is important to restore the foundation first and secure the territoriality when there is no restoration plan for the elevation structure or size of the garden relics. Restoration of individual garden elements requires careful examination of the literature by limiting the restoration of objects that can be restored through the examination of the literature for each element, such as some buildings or facilities in the traditional garden site.

• Clinical and Experimental Reproductive Medicine
• /
• v.33 no.2
• /
• pp.125-132
• /
• 2006

Objective: In the previous study, we complied the differentially expressed genes during early folliculogenesis. Objective of the present study was to identify downstream target genes of transcription factors (TFs) using bioinformatics for selecting the target TFs among the gene lists for further functional analysis. Materials & Methods: By using bioinformatics tools, constituent domains were identified from database searches using Gene Ontology, MGI, and Entrez Gene. Downstream target proteins/genes of each TF were identified from database searches using TF database ($TRANSFAC^{(R)}$ 6.0) and eukaryotic promoter database (EPD). Results: DNA binding and trans-activation domains of all TFs listed previously were identified, and the list of downstream target proteins/genes was obtained from searches of TF database and promoter database. Based on the known function of identified downstream genes and the domains, 3 (HNF4, PPARg, and TBX2) out of 26 TFs were selected for further functional analysis. The genes of wee1-like protein kinase and p21WAF1 (cdk inhibitor) were identified as potential downstream target genes of HNF4 and TBX2, respectively. PPARg, through protein-protein interaction with other protein partners, acts as a transcription regulator of genes of EGFR, p21WAF1, cycD1, p53, and VEGF. Among the selected 3 TFs, further study is in progress for HNF4 and TBX2, since wee1-like protein kinase and cdk inhibitor may involved in regulating maturation promoting factor (MPF) activity during early folliculogenesis. Conclusions: Approach used in the present study, in silico analysis of downstream target genes, was useful for analyzing list of TFs obtained from high-throughput cDNA microarray study. To verify its binding and functions of the selected TFs in early folliculogenesis, EMSA and further relevant characterizations are under investigation.

• Journal of Fisheries and Marine Sciences Education
• /
• v.23 no.3
• /
• pp.410-424
• /
• 2011

This study was investigated for the purpose of obtaining basic data which can be applied to processing of canned sea mussel using tomato paste. Shell were washed, and then steamed and shucked. Sea mussel meat was prepared with ratio of sea mussel 90g, tomato paste sauce 65g(tomato paste 42%, gum guar 1.0%, salt 2.0%, starch syrup 2.0%, cooking wine 1%, water 52%). The sea mussel meats were packed with vacuum seamer in 301-3 can, and then sterilized for various F0 value(F0 8-12 min.) in a steam system retort at $118^{\circ}C$. The factors such as pH, VBN, amino-N, total amino acid, free amino acid, chemical composition, color value (L, a, b), texture profile, TBA value, mineral, sensory evaluation and viable bacterial count of the canned sea mussel produced with various sterilization condition(F0 8-12 min.) were measured. The same element was also measured during preservation. The results showed that the product sterilized at F0 8 min. and preserved for 90 days were the most desirable.

• Archives of Pharmacal Research
• /
• v.28 no.3
• /
• pp.249-268
• /
• 2005

Drug metabolizing enzymes (DMEs) play central roles in the metabolism, elimination and detoxification of xenobiotics and drugs introduced into the human body. Most of the tissues and organs in our body are well equipped with diverse and various DMEs including phase I, phase II metabolizing enzymes and phase III transporters, which are present in abundance either at the basal unstimulated level, and/or are inducible at elevated level after exposure to xenobiotics. Recently, many important advances have been made in the mechanisms that regulate the expression of these drug metabolism genes. Various nuclear receptors including the aryl hydrocarbon receptor (AhR), orphan nuclear receptors, and nuclear factor-erythoroid 2 p45-related factor 2 (Nrf2) have been shown to be the key mediators of drug-induced changes in phase I, phase II metabolizing enzymes as well as phase III transporters involved in efflux mechanisms. For instance, the expression of CYP1 genes can be induced by AhR, which dimerizes with the AhR nuclear translocator (Arnt) , in response to many polycyclic aromatic hydrocarbon (PAHs). Similarly, the steroid family of orphan nuclear receptors, the constitutive androstane receptor (CAR) and pregnane X receptor (PXR), both heterodimerize with the ret-inoid X receptor (RXR), are shown to transcriptionally activate the promoters of CYP2B and CYP3A gene expression by xenobiotics such as phenobarbital-like compounds (CAR) and dexamethasone and rifampin-type of agents (PXR). The peroxisome proliferator activated receptor (PPAR), which is one of the first characterized members of the nuclear hormone receptor, also dimerizes with RXR and has been shown to be activated by lipid lowering agent fib rate-type of compounds leading to transcriptional activation of the promoters on CYP4A gene. CYP7A was recognized as the first target gene of the liver X receptor (LXR), in which the elimination of cholesterol depends on CYP7A. Farnesoid X receptor (FXR) was identified as a bile acid receptor, and its activation results in the inhibition of hepatic acid biosynthesis and increased transport of bile acids from intestinal lumen to the liver, and CYP7A is one of its target genes. The transcriptional activation by these receptors upon binding to the promoters located at the 5-flanking region of these GYP genes generally leads to the induction of their mRNA gene expression. The physiological and the pharmacological implications of common partner of RXR for CAR, PXR, PPAR, LXR and FXR receptors largely remain unknown and are under intense investigations. For the phase II DMEs, phase II gene inducers such as the phenolic compounds butylated hydroxyanisol (BHA), tert-butylhydroquinone (tBHQ), green tea polyphenol (GTP), (-)-epigallocatechin-3-gallate (EGCG) and the isothiocyanates (PEITC, sul­foraphane) generally appear to be electrophiles. They generally possess electrophilic-medi­ated stress response, resulting in the activation of bZIP transcription factors Nrf2 which dimerizes with Mafs and binds to the antioxidant/electrophile response element (ARE/EpRE) promoter, which is located in many phase II DMEs as well as many cellular defensive enzymes such as heme oxygenase-1 (HO-1), with the subsequent induction of the expression of these genes. Phase III transporters, for example, P-glycoprotein (P-gp), multidrug resistance-associated proteins (MRPs), and organic anion transporting polypeptide 2 (OATP2) are expressed in many tissues such as the liver, intestine, kidney, and brain, and play crucial roles in drug absorption, distribution, and excretion. The orphan nuclear receptors PXR and GAR have been shown to be involved in the regulation of these transporters. Along with phase I and phase II enzyme induction, pretreatment with several kinds of inducers has been shown to alter the expression of phase III transporters, and alter the excretion of xenobiotics, which implies that phase III transporters may also be similarly regulated in a coordinated fashion, and provides an important mean to protect the body from xenobiotics insults. It appears that in general, exposure to phase I, phase II and phase III gene inducers may trigger cellular 'stress' response leading to the increase in their gene expression, which ultimately enhance the elimination and clearance of these xenobiotics and/or other 'cellular stresses' including harmful reactive intermediates such as reactive oxygen species (ROS), so that the body will remove the 'stress' expeditiously. Consequently, this homeostatic response of the body plays a central role in the protection of the body against 'environmental' insults such as those elicited by exposure to xenobiotics.

• Journal of dental hygiene science
• /
• v.7 no.3
• /
• pp.179-185
• /
• 2007

The purpose of this study targeted on high school student in the department of liberal arts, industry in Daegu metropolitan city, is to get basic data necessary for the development of dental educational program, to discern prevention and treatment of temporomandibular joint disorder by observing the situation temporomandibular joint disorder and contribution element, of relationship of school life stress The results are as follows.: 1. The percentage of occurring temporomandibular joint disorder in the high school resulted in a joint noise at 61.8% and joint dislocation 6.9%, sharp pain 47.5% at time of chewing. 29.8% at the time of the non-chewing, lockjaw 11.3%, a headache appeared at 40.4%.2. In the contribution factor of occurring temporomandibular joint disorder, the cause of joint noise was the clench one's teeth, lip and cheek clench, For the pain at the time of chewing clench one's teeth, one side chewing, over-chewing, lip clench, sideways sleeping showed the difference. (P < 0.01) For the pain at the time of non-chewing, clench one's teeth, bruxism, one side chewing, lip and cheek clench were similar, and for the lockjaw, clench one's teeth, bruxism, sideways sleeping showed the difference. The plum evil thing period at time of the fault writing that statistically showed the difference. For the headache, the contribution factors were the all bad habits mentioned above excluding one side sleeping.(P < 0.01, P < 0.05). 3. The rate of experiencing temporomandibular joint disorder by oral and maxillofacia was 13.4% in industrial department, and 19.6% in liberal arts. And for the factor of wound was that exercise 26.8%, others 24.4%, fall-down 19.5%. And for the industrial, exercise 44.4%, fall-down 22.2%, others 14.9%. The treatment experience appeared at 5.0% in industrial department, 2.9% in liberal arts. And for the medical institutions, liberal arts were dental clinic 50%, orthopedics 50%, and the industrial department orthopedics 40%, oriental medicine clinic 30%, dental clinic 30%. 4. In case of temporomandibular joint disorder, there were no difference by grades or educational background. And at the time of chewing or non-chewing showed similar difference.(P < 0.01). 5. Compared to stress in the high school, it generally showed higher in liberal arts than in industrial department due to school record. Its scope was $3.75{\pm}1.14$ in liberal arts, $3.01{\pm}1.23$ in industrial department. 6. The school record, school life, stress problems by teachers, chewing/non-chewing pain of temporomandibular joint disorder, joint noise had a similar correlation.(P < 0.01, < 0.05).

• Journal of the Korean Chemical Society
• /
• v.62 no.2
• /
• pp.124-136
• /
• 2018

In this study, we applied the flipped-classroom to the general chemistry experiment lecture of the domestic university with strong teacher-led, and explored the effects and possibilities of the course. For this purpose, 30 students who were enrolled in the Science Education Department of the College of Education in the metropolitan area were randomly assigned to two groups, namely, the flipped-classroom group and the traditional class group. Then, we developed a general chemistry experiment lessons based on the flipped-classroom along with visual materials and we applied the lessons for 15 weeks. After all the classes, we conducted a survey to see the students' perception of the general chemistry experiment lecture by flipped classroom. As a result of analysis, the students of the flipped-classroom group were more positive than the students of the traditional class group in terms of the usefulness of the class activity, the importance of each activity element for the successful learning, the learning level, and the intention for another lesson. As a result of analyzing students' perceptions in terms of general chemical experiment activities such as conducting experiments or writing reports and understanding the contents of experiments, the average score of the flippedclassroom group was higher than the traditional class group, and the main cause of this result was the video material provided by prior learning activities. In addition, as a result of analyzing students' perceptions in terms of interactions and self-directed learning in class, the average score of the flipped-classroom group was generally higher than the traditional class group. In particular, students' interactions and self-directed learning were statistically significant differences between the two groups. And the students' perception of video material was very positive, and it was analyzed that the video that the instructor directly explained experiment theory and method was the most favorite videos of students. We discussed educational implications of these findings.

• Management & Information Systems Review
• /
• v.33 no.1
• /
• pp.191-217
• /
• 2014

The Purpose of this study is to find the effect factors of R&D investment in SMEs which plays an important role in the national economy, and the differences of the effect factors by the type of SMEs. The subject of this study is about 3,400 SMEs mentioned in "The survey of technical statistics on SMEs in 2007" by Korea Federation of Small and Medium Business. The effect factors are related with the size of business, the infrastructure of R&D and the activities of R&D which have been studied by many researchers. The methods of analysis are regression analysis, moderating effect analysis and the software package used is SPSS 12.0. The results of the study are as fallow. First, it was found that unlike in previous studies which show the effect of the elements of business's size, research infrastructure, research activities on R&D investment, one element alone can't be considered for meaningful result but the various elements have effect on R&D investment at the same time. In other words, the number of employees and the sales as the elements of business's size, the ratio of researchers, the technical ability, the ratio of equipment possession and the intellectual properties as the elements of R&D infrastructure, the activity of ideas and joint research as the elements of R&D activities have positive(+) effect, whereas the participation of CEO in the activity of R&D as the elements of R&D activities activity has negative(-) one. The number of employees, the ratio of researchers, and the sales had relatively high influence whereas equipment possession, technical ability, intellectual properties, the participation of CEO in the research, the activity of idea, joint research had relatively low influence. Next, it was also found that there are differences of the effect factors over the types of SMEs. SMEs were classified into 19 types by eight criteria such as start-ups and existing business by business age; small business and medium business by size; manufacturing business and service business by product type;independent business and subcontractor business by dealing type; businesses in the entering, growing, maturing and restructuring stage by growth stage; businesses with low, medium and high technology by technological level; pioneering business and non-pioneering business by industrial type; and businesses with state-of-the-art technology and non-advanced business by the level of business activities. The meaning of this study lies in the fact that it found the various effect factors should be considered at the same time when conducting study on SMEs' R&D investment, and the differences by the type should be acknowledged. This study surpassed the limitations of the previous studies which focused on a couple of factors and types. This study result can also be considered for other studies on achievement, organization, marketing and others. Moreover, it shows that a differential policy by business type is needed when formulating SME policy.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.4
• /
• pp.325-334
• /
• 2008

The standard prestressed concrete I-girder bridge (PSC I-girder bridge) is one of the most prevalent types for small and medium bridges in Korea. When determining the member forces in a section to assess the safety of girder in this type of bridge, the general practice is to use the simplified practical equations or the live load distribution factors proposed in design standards rather than the precise analysis through the finite element method or so. Meanwhile, the live load distribution factors currently used in Korean design practice are just a reflection of overseas research results or design standards without alterations. Therefore, it is necessary to develop an equation of the live load distribution factors fit for the design conditions of Korea, considering the standardized section of standard PSC I-girder bridges and the design strength of concrete. In this study, to develop an equation of the live load distribution factors, a parametric analysis and sensitivity analysis were carried out on the parameters such as width of bridge, span length, girder spacing, width of traffic lane, etc. As a result, the major variables to determine the size of distribution factors were girder spacing, overhang length and span length in case of external girders. For internal adjacent girders, the determinant factors were girder spacing, overhang length, span length and width of bridge. For internal girders, the factors were girder spacing, width of bridge and span length. Then, an equation of live load distribution factors was developed through the multiple linear regression analysis on the results of parametric analysis. When the actual practice engineers design a bridge with the equation of live load distribution factors developed here, they will determine the design of member forces ensuring the appropriate safety rate more easily. Moreover, in the preliminary design, this model is expected to save much time for the repetitive design to improve the structural efficiency of PSC I-girder bridges.