• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.12 s.177
• /
• pp.34-41
• /
• 2005

There is a strong demand fur the contactless transportation device fur a hard disk and silicon wafer without contaminating and damaging them. To fulfill this requirements, A transportation device fur them has been proposed. But the device needs many of costly displacement sensors positioned along the transportation interval and possesses a very complicated controller and driving scheme. To overcome those kinds of drawback, in this paper, we present a very simple and cost-effective transportation device which only consists of a linear guide, very simple electrostatic suspension system and driving circuit of stepping motor. The principle of stable suspension by relay feedback control, derivation of lateral restoring force, the design of transportation system are described, fellowed by the experimental system. Experimental results show that a 3.5-inch hard disk has been transported with a speed of approximately 20mm/s while being suspended stably at a gap of 0.25mm.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.4
• /
• pp.74-81
• /
• 1997

I정전 모-터는 일반적으로 분극전하와 전계의 상호작용을 이용한 것으로서 전계내에 축적되는 전계에너지(W=1/2 *ED)의 힘을 기계적 출력으로 도출하여 이용하는 것이다. 본 논문에서는 유한 요소법을 사용하여 단상 정전 모터의 전계와 등전위분포 및 미소한 토오크를 시뮬레이션을 통하여 구하고 해석하였다. 그 결과 이 모터는 특성상 정전, 역전이 가능하고 고전압에서 응용이 가능하므로 특수기의 서어보모터로 쓸 수 있겠고, 설비중 고압으로 인한 위험이 따르는 곳의 안전예고기, 고전압계, 위상 판별기로도 사용이 가능할 것으로 기대된다.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.8
• /
• pp.101-106
• /
• 2018

Most people with visual impairments can not use both hands freely because they carry a cane. And unnecessary contact with people around you during walking can occur. Other guides include guide dogs, but the price and maintenance cost are expensive and difficult to manage. In this paper, we propose a smart glove, which prevents unnecessary contact when blind people use the cane, detects the obstacle ahead by using the ultrasonic sensor, and informs the presence of the obstacle by using the servo motor. In addition, the electrostatic proximity touch module on the fingers executes a specific application of the smart phone connected by Bluetooth when the finger touches each other. It is designed to allow you to use text or phone calls when you are lost or in an emergency. The results of this study will be used as a tool to provide a more convenient life for the visually impaired.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.5
• /
• pp.57-65
• /
• 1996

초고속 정전유도형 정전전동기의 개발의 위한 기초연구로서 회전자 물질의 표면저항률, 비유전율 및 전하완하시정수의 변화에 따른 회전자의 회전속도특성을 조사하였다. 회전자표층물질의 비유전율 및 표면저항률은 클수록 회전자의 회전속도는 증가하였으며, 또한 이 두 요소를 곱한 회전지표면에 유도된 전하의 완화시정수가 클수록 회전속도는 증가하였다. 한편 회전자표층물질로서 도전성물질(Ti)을 폴리프로필렌 위에 불연속적으로, 즉 띠의 모양으로 증착한 시료를 사용하여 띠의 폭 및 경사각의 변화에 따른 회전자의 회전속도특성 및 토크 특성을 조사하였다. 이 경우 띠의 폭이 적어질수록 회전자의 회전수는 지수함수적으로 증가하였으며, 등간격으로 세분화한 것을 회전자의 축에 대해서 회전방향으로 경사각$\theta$만큼 기울였을 때 $\theta$=60。 및 150。일 때 회전자의 회전속도가 가장 큰 것으로 나타났으며, 특히 경사각 $\theta$=0。일때에 비해서 약 125[%]정도 높은 회전속도를 보였다. 최대토크 및 최대출력은 각각 {{{{25$\times$ { 10}^{ -6} [Nm]}}}}및 11.5[mW]이었다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.4
• /
• pp.163-173
• /
• 2005

The conventional optimization study for electromagnetic systems has been mostly on the shape or size optimization. The goal for these optimization methods is to improve performance of electromagnetic systems by optimizing the interface shape of two different materials while their given layout or initial topology are held. The feasible topology can be diverse and an appropriate topology will give much better design results. In this paper we propose a theory and an algorithm for topology optimization of electromagnetic systems, which are based on the finite element method. The topology optimization technique employes a direct searching method of sensitivity analysis in which the information of material sensitivity is used. Two numerical examples of a switched reluctance motor and an electrostatic actuator of MEMS are tested and their design results show that the optimization method is valid and useful for the topology and basic layout design of electromagnetic systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6925-6931
• /
• 2015

LED(Light Emitting Diode) is used in various filed like a display because of low power consuming, long life span, high brightness, rapid response time and environmental-friendly characteristic. General fabrication method is combination blue light LED chip with yellow fluorescent substance. Because this way is suitable for industry field in terms of convenience, economic, efficiency. In white light LED packaging process, encapsulation process that is dispensing fluorescent substance with silicon to blue light LED chip is most important. So, in this paper we develop EHD pump system using voice coil motor and electrostatic pump for dispensing fluorescent substance. For these things we conduct basic test about liquid surface profiles by voltage and process time. Through this data we decide optimal process condition and verify the optimal condition using design of experiment method. And to confirm uniformity of the condition, we conduct repeat dispensing test.

• Journal of The Korean Association For Science Education
• /
• v.37 no.2
• /
• pp.253-262
• /
• 2017

This study aims at investigating the perceptions of science teachers about the role of visual representations in the teaching of electromagnetism, and finding out how science teachers use visual representations in their teaching of electromagnetism and the difficulties they experience in dealing with those representations. A total of 121 science teachers responded to the online survey. The results showed that most of the teachers agreed to the significance of using visual representations in the classroom but regarded their role as means of simply delivering science knowledge rather than constructing or generating knowledge. For the three visual representations widely used in teaching of electromagnetism in secondary schools (electrostatic induction on electroscope, magnetic field around current carrying wire, structure and principle of electric motor), the teachers preferred teacher-centered use of visual representations rather than student-centered and teacher's construction of representations were the most frequent among four types of use; interpretation, construction, application, and evaluation. The difficulties of teaching with these three visual representations were categorized into several factors; teachers, students, the characteristics of the representations, and lack of resources and classroom environment. Teachers' limited perceptions about the role of visual representations were associated with the ways of using visual representations in their teaching. Implications for the effective use of visual representations for science learning and teaching were discussed.