• 한국전기전자재료학회논문지
• /
• 제17권4호
• /
• pp.439-442
• /
• 2004

In this study, we investigated about electrooptics characteristic of three kinds of TN cell on the polyimide surface. Monodomain alignments of thermal stressed TN cell over temperature of liquid crystal isotropic phase were almost the same as that of no thermal stressed TN cells. However, the thermal stressed TN cells have many defects. Also, threshold voltage and response time of thermal stressed TN cells show the same performances as no thermal stressed TN cells. There were little changes of value in these TN cells. However, transmittances of TN cells on the polyimide surface decrease with increasing thermal stress time. Finally, the residual DC voltage of the thermal stressed TN cell on the polyimide surface shows decrease of characteristics as increasing thermal stress time. Therefore, the thermal stability of TN cell was decreased by high thermal stress for the long times.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 제6회 학술대회 논문집 일렉트렛트 및 응용기술연구회
• /
• pp.9-12
• /
• 2004

In this study, we investigated about electrooptics characteristic of three kind of TN cell on the polyimide surface. Monodomain alignments of thermal stressed TN cell over temperature of liquid crystal isotropic phase were almost same that of no thermal stressed TN cells. However, the thermal stressed TN cell have many defects. Also, threshold voltage and response time of thermal stressed TN cells show same performances of no thermal stressed TN cells. There were little changes of value in these TN cells. However, transmittances of TN cells on the polyimide surface decrease with increasing thermal stress time. Finally, the residual DC voltage of the thermal stressed TN cell on the polyimide surface show decrease of characteristics as increasing thermal stress time. Therefore, thermal stability of TN cell was decreased by high thermal stress for the long times.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.986-989
• /
• 2007

In this review, several aspects for improving the quality of materials parameters of Nematic Liquid Crystals (NLCs) and Ferroelectric Liquid Crystals (FLCs) will be discussed. In particular the decrease of the response time is a need. It will be demonstrated that the materials parameters of NLCs and FLCs can be improved among other ways due to optimization of chemical structures of the NLCs and /or FLCs mixtures, due to doping them with nanomaterials and by using fast elastic relaxation processes.

• 디지털콘텐츠학회 논문지
• /
• 제10권2호
• /
• pp.199-207
• /
• 2009

Q-스위칭은 셔터나 다른 광학소자를 레이저 광 공진기 내에 넣어 광이 공진기 내에서 발진하는데 손실을 유발하고, 충분한 반전분포가 활성 매질 내에서 생성되면 순간적으로 셔터를 열어 공진기 내에 축적된 에너지가 매우 강한 빛으로 방출되게 하는 것이다. 이와 같이 Q-스위칭은 레이저 공진기의 Q--factor를 감소시켰다가 갑자기 증가시키는 것이다. 레이저 Q-스위칭의 방법에는 mechanical switching 방법, electro-optic switching 방법, switching by saturable absorber 방법, acousto-optic switching 방법 등 크게 4가지가 쓰이고 있다. 이들 중 전기광학적인 효과에 의한 전기적인 전환은 짧은 펄스폭의 Q-스위칭 펄스를 생성할 수 있기 때문에 널리 사용되고 있다. 따라서, 전기광학효과의 특성을 가진 Pockel cell은 Q--switch로 사용하기 적합한 것으로 알려져 있다. 본 연구에서는 포켈스 셀 Q-스위치용 구동 장치를 스위칭 소자인 FET와 PIC 마이크로프로세서 및 펄스 트랜스로 설계, 제작하고, 펄스형 Nd:YAG 레이저 시스템에 적용하여 Q-스위치의 동작 특성을 조사, 연구하였다. 또한, 이 Q-스위치를 통하여 출력된 Nd:YAG 레이저 빔의 측정치를 이론적 계산에 의해 구해진 예상치와 비교하여 Q-스위칭 된 레이저 빔의 특성을 분석하였다.

• 대한치과기공학회지
• /
• 제41권3호
• /
• pp.203-209
• /
• 2019

Purpose: The purpose of this study was to investigate the mechanical properties of polymer prosthetic and restorative materials for dental CAD/CAM using two test method; surface characteristics and shear bond strength. Methods: Commercialized CAD/CAM polymer blanks were investigated; One kinds of PMMA, and one PEKK blanks. A total of 20 PMMA and PEKK specimens were prepared, and each group was divided into 10 specimens. Average surface roughness was observed under surface profilometer. The contact angle was measured with a surface electrooptics. The bond strength was evaluated by a universal testing machine at a crosshead speed of 5mm/min. The data were statistically analyzed using independent t-test and Fisher's exact test(P<0.05). Results: The PMMA and PEKK group showed a significant difference in the shear bond strength with the composite resin(P<0.05). The surface roughness of the PEKK group was higher than that of the PMMA group. The fracture mode were observed in PEKK groups with 50% showing adhesive remnant index score. Conclusion: PEEK is used as substructure material and composite veneering material is applied. PEKK resins will contribute to the development of successful products that will provide structural and aesthetic satisfaction.