• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.11
• /
• pp.1015-1021
• /
• 2014

This paper proposes the center distributed embroidery machine structure with 1,500 RPM, 52 heads for productivity and large sized embroidery goods. The synchronous velocity controller is adopted for control of the 2-axis distributed embroidery machine and the DOB(Disturbance Observer) is also adopted for minimizing disturbances caused by needle cams. For driving experiments of 2-axis center distributed driving structure, two conventional 26 heads 1,500RPM embroidery machines are used. It was shown that the center distributed driving structure with 2-axis synchronous control can be one way for implementing a large embroidery machine.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.123-124
• /
• 2008

The appearance inspection of various electronic products and parts has been executed by the eyesight of human. But inspection by eyesight can't bring about uniform inspection result. Because the appearance inspection result by eyesight of human is changed by condition of physical and spirit of the checker. So machine vision inspection system is currently used to many appearance inspection fields instead of the checker. Therefore we proposes a inspection system in this paper. it will be able to secure the objectivity of the prosecuting attorney using inspection system. Also this system has been developed only using PC, CCD Camera and Visual C++ for universal workplace.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.10
• /
• pp.1322-1329
• /
• 2018

In this paper, the reliability test of three kinds of epoxy resin for GIS Spacer, which is a high voltage based heavy electric machine, AC electrical treeing experiments were performed. Three types of epoxy resins, Araldite B41, CT 5531 CI and B46, have slight viscosity differences. An non-uniform electric field, E = 1149.4 kV/mm, as the needle to plate electrode, a power source with a frequency of 1 kHz was applied to the tree electrode for accelerated deterioration. The treeing phenomena of the three kinds of epoxy resin all initiated, propagated, and destroyed by the branch tree. Epoxy Resin B46 was 145 times longer than B41 and 53 times longer than CT 5531CI. I think that the choice of epoxy resin is very important in choosing high voltage heavy electric machine insulation materials.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 1999.11a
• /
• pp.111-115
• /
• 1999

The $Li_2O-MgO-MgF_2-SiO_2$glasses with addition of $B_2O_3$ were investigated in order to make glass-ceramics for low temperature firing substrate. Glasses were made by melting at $1450^{\circ}C$ in the electronic furnace and crystallized at $750^{\circ}C$. After the crystallization, crystal phases and microstructure were observed. The crystal phases were polycrystalline of lithium boron fluorphlogopite and lithium fluorhectorite. The crystal shape was changed to grande type from needle type with the increase in $B_2O_3$ contents. Average particle size of the glass-ceramics aftar water swelling was $3.77{\mu}{\textrm}{m}$. The optimum sintering temperature and sintering shrinkage of the substrate were $900^{\circ}C$ and 13.4vol%, respectively.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.129-130
• /
• 1998

In this paper, We designed the ECG-NIBP-$SpO_2$ patient monitor. This production can measure Electrocardiograph, Heart Rate, Noninvasive Blood Pressure, and Oxygen Saturation for Noninvasive Mehod and can display each information. These informations were implemented by the electrodes of ECG part, the cuff of NIBP module and the finger probe with light sensor of $SpO_2$ without injection of needle or catheter. In addition, We developed a new analysis algorithm and measurement technique for NIBP and $SpO_2$ to observe patient's conditions correctly.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.4
• /
• pp.35-39
• /
• 1999

The $Li_2O-MgO-MgF_2-SiO_2$glasses with addition of $B_2O_3$ were investigated in order to make glass-ceramics for low temperature firing substrate. Glasses were made by melting at $1450^{\circ}C$ in the electronic furnace and crystallized at $750^{\circ}C$. The crystal phases were polycrystalline of lithium boron fluorphlogopite and lithium fluorhectorite. The crystal shape was chanced to granule type from needle type with increasing $B_2O_3$ content. Average particle size of the glass-ceramics after water swelling was 3.77$\mu\textrm{m}$. The optimum sintering temperature and sintering shrinkage of the substrate were $900^{\circ}C$ and 13.4%, respectively.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.6
• /
• pp.240-245
• /
• 2002

In this paper, a novel optical measuring system for the measurement of nonuniform electric field was proposed. The electric field distorted by the discharges was detected through proposed optical measuring system based on the Pockets effect and Mach-Zehnder interferometer. In order to produce distorted electric field, corona discharge was generated from needle-plane electrode in air and detected by optical measuring system. This optical measuring system is constructed by He-Ne laser, single mode optical fiber, $2{\times}2$ 50/50 beam splitter, $LiNbO_3$ Pockets cell, photo detector and PC. In this system, output signal of Pockels sensor is measured by digital oscilloscope and transferred to the PC for recording and statistical processing. Through this paper, a promising possibilities of proto-type optical measuring system were evinced.

• Journal of ILASS-Korea
• /
• v.24 no.2
• /
• pp.66-72
• /
• 2019

Diesel vehicles suffer from poor starting and running problems at cold temperatures. Diesel vehicles have the characteristic that CO and PM are reduced or similarly discharged when going from low temperature to high temperature. In this study, a bypass type piezo injector for electronic control based common rail injection system was used. Numerical analysis using injector drive analysis model was performed to analyze injector drive and internal fuel flow characteristics according to fuel temperature change. The results show that the rate of density change due to the fuel temperature is proportional, and that the effect of the kinematic viscosity is relatively large between $-20^{\circ}C$ and $0^{\circ}C$. Comparing the results of temperature condition at $0^{\circ}C$ and $20^{\circ}C$, it is considered that the viscosity is more correlated with the needle displacement than the pressure chamber of the delivery chamber.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.11
• /
• pp.5517-5523
• /
• 2012

Purpose: To evaluate the diagnostic accuracy of ultrasonograph and fine-needle aspiration cytologic examination (USG-FNAC) in the staging of axillary lymph node metastasis in breast cancer patients.Methods: We conducted an electronic search of the literature addressing the performance of USG-FNAC in diagnosis of axillary lymph node metastasis in databases such as Pubmed, Medline, Embase, Ovid and Cochrane library. We introduced a series of diagnostic test indices to evaluate the performance of USG-FNAC by the random effect model (REM), including sensitivity, specificity, likelihood ratios, and diagnostic odds ratios and area under the curve (AUC). Results: A total of 20 studies including 1371 cases and 1289 controls were identified. The pooled sensitivity was determined to be 0.66 (95% CI 0.64-0.69), specificity 0.98 (95% CI 0.98-0.99), positive likelihood ratio 22.7 (95% CI 15.0-34.49), negative likelihood ratio 0.32 (95% CI 0.25-0.41), diagnostic OR 84.2 (95% CI 53.3-133.0). Due to the marginal threshold effect found in some indices of diagnostic validity, we used a summary SROC curve to aggregate data, and obtained a symmetrical curve with an AUC of 0.942. Conclusion: The results of this meta-analysis indicated that the USG-FNAC techniques have acceptable diagnostic validity indices and can be used for early staging of axillary lymph node in breast cancer patients.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.2
• /
• pp.95-106
• /
• 2016

Biometric data may appear different depending on the person and sasang Medicine has a close relationship with the Department. Biometric data not only mean a human heart rate, a blood pressure, a heart rate, and the past medical history, degree of aging, body mass index, but also is used as a reference measure for determining the state of health of the person. So biometric data should be reproduced for the application purposes, depending on their applications. In previous studies, because the biometric data is changed in real time and applies only to snap shut at the time of the continuity of the current time is excluded. Therefore, in this study in order to solve this problem, we propose a biometric data patton analysis model comprising a continuity of time in the big data environment consisting of biometric data. The proposed model can help determine the choice of needle position carefully when using the electronic acupuncture for care and health promotion.