• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.303-306
• /
• 2001

Composite insulating materials used in outdoor high voltage equipment are required to have high electric performance because of the miniaturization. The frequence dependence of the permittivity and the loss tangent have important information. In this paper we describe the frequency dependence of the permittivity and the loss tangent for epoxy resin filled with silica and the influence of filler shape on the dielectric properties. The increment of tan $\delta$ in the low frequency region is caused by the increment of both of the electrical conductivity and the polarization due to the shape of filler and water sbsorbed in and near the interface between the fillers and resins. Result of charge current and discharge measure, electric conduction increased according to voltage.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1200-1203
• /
• 2003

The dielectric breakdown of epoxy composites used for transformers was experimented and then its data were applied to Weibull distribution probability. First of all, speaking of dielectric breakdown properties, the more hardener increased, the stronger breakdown strength became at low temperature because of cross-linked density by the virtue of ester radical. The breakdown strength of specimens with filler was lower than it of non-filler specimens because it is believed that the adding filler forms interface and charge is accumulated in it, therefore the molecular motility is raised and the electric field is concentrated. In the case of filled specimens with treating silane, the breakdown strength become much higher. Finally, according to Weibull distribution analysis, reducing breakdown probability of equipment insulation lower than 0.1% level requires the allowable field allowable field intensity values to be kept under 21.5 MV/cm.

• 전자통신동향분석
• /
• 제36권3호
• /
• pp.87-96
• /
• 2021

Quantum computers will be a game-changer in various fields, such as cryptography and new materials. Quantum computer is quite different from the classical computer by using quantum-mechanical phenomena, such as superposition, entanglement, and interference. The main components of a quantum computer can be divided into quantum-algorithm, quantum-classical control interface, and quantum processor. Universal quantum computing, which can be applied in various industries, is expected to have more than millions of qubits with high enough gate accuracy. Currently, It uses general-purpose electronic equipment, which is placed in a rack, at room temperature to make electronic signals that control qubits. However, implementing a universal quantum computer with a low error rate requires a lot of qubits demands the change of the current control system to be an integrated and miniaturized system that can be operated at low temperatures. In this study, we explore the fundamental units of the control system, describe the problems and alternatives of the current control system, and discuss a future quantum control system.

• 한국전기전자재료학회논문지
• /
• 제34권2호
• /
• pp.85-89
• /
• 2021

High reliability thin film transistors are important factors for next-generation displays. The reliability of transparent a-IGZO semiconductors is being actively studied for display applications. A plasma treatment can fill the oxygen vacancies in the channel layer and the channel layer/insulating layer interface so that the device can work stably under a bias voltage. This paper studies the effect of plasma treatment on the performance of a-IGZO TFT devices. The influence of different plasma gases on the electrical parameters of device and its working reliability are reviewed. The article mentions argon, fluorine, hydrogen and several ways of processing in the atmosphere. Among these methods, F (fluorine) plasma treatment can maximize equipment reliability. It is expected that the presented results will form a basis for further research to improve the reliability of a-IGZO TFT.

• 한국실내디자인학회논문집
• /
• 제19권3호
• /
• pp.205-213
• /
• 2010

The importance of communication which is oriented to interaction, fusion and connection is more increased in the post-information society. The information environment is already realized as interface to reach immediately and freely to the databased information and knowledge. The contemporary libraries execute very important roles as an intellectual infra of modern times to deliver the great human achievement and create new culture. In the mean time, the rapid information-oriented society and the development of digital technology bring out big change in the traditional dispatch and receipt method of information. For this reason, libraries as the community space of visitors integrates physical space - electronic space and reconstructs new temporary culture and value to build the new interface that connects human to human, human to space and human to information. On the premise of these awareness, this study analysis the creative interface factor of Tama Art University New Libraries in Ito Toyo in order to research the function and the application method of modern libraries. And the results are follows. 1)We can make sure the significance of communication and the integration consciousness between digital technology and analogue sensitivity that is the characteristic of the post-information society. 2)We can classify for the creative interface factors by the character as space factor(Arcade, Gallery, Lounge, AV Booth, Cafe), facility/equipment factor(Laboratory, Media, Bar, Info Shelf, Media Seat) and furniture factor(Carrel, Desk, Mag Table, XI Shelf). 3)We can see that these interface factors change the stream of library users and that the library is constructed for library users to create and discovery something easily from books and modern technologies. And we can realize also that these factors are creative installation to lead out naturally the latent liberty sense of users.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제3권11호
• /
• pp.503-510
• /
• 2014

전자통신 기술의 발달로 인해 선박 항해 장비들도 아날로그에서 디지털로 변경되어 통합 운용되고 있으며, 터치스크린 기반의 항해 인터페이스가 주목받고 연구 개발되고 있는 추세이다. 하지만, 항해 중에 파도와 같은 외부적인 환경요인으로부터 영향을 받기 때문에 잘못된 조작으로 인하여 위험한 해양사고가 발생할 수 있는 문제점을 갖고 있지만, 이를 고려한 체계적인 연구가 이루어지지 않고 있다. 본 논문에서는 터치스크린 입력상의 외부 환경을 고려한 안정성을 검증하는 실험 모델을 제안한다. 또한 제안하는 실험 모델을 통하여 터치스크린 인터페이스에서 버튼의 크기와 입력 지연시간을 부여하는 것이 효과가 있는지 확인하는 모의실험을 하였다. 제안된 실험 모델을 통한 분석을 통하여, 선박 전체 시스템의 안정성을 증진시킬 수 있는 사용자 오류에 견고한 터치스크린 인터페이스 연구에 크게 기여할 수 있을 것이다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.396-405
• /
• 2009

열차제어 지상신호시스템에서 핵심적인 철도보안기능을 수행하는 연동장치는 철도산업의 안전성 확보 지침에 따라 높은 안전성과 신뢰성을 갖추어야만 한다. 따라서 연동장치는 높은 안전성과 신뢰성을 달성할 수 있도록 실시간 운영체제 및 그 구성 하드웨어의 랜덤 고장에 대처하기 위한 Fail-Safe형 다중 제어시스템으로 구성된다. 이러한 구성에서는 운영자 인터페이스를 포함한 다양한 장치와의 메시지 교환을 위한 인터페이스 가능을 구현하기 어려운 특성이 존재한다. 본 논문에서는 연동장치와 상위 인터페이스 설비간의 통신기능을 구현하기 위한 Dual Ethernet 네트워크 구성 및 DPST (Dual Packet Seamless Transfer) 통신 프로토콜을 제안한다. 제안된 시스템의 구성에서는 특정 네트워크 장비의 랜덤 고장이나 통신오류에 강인한 특성을 보이며 통신채널의 장애를 검출할 수 있는 기능이 추가되어 설비의 유지보수에 효과적인 정보로 활용될 수 있음을 실험적으로 검증한다. 제안된 네트워크 구성 및 운영 프로토콜을 현대제철 전용철도용 전자연동장치에 구현하고 그 성능과 특성을 유럽표준규격 EN50159의 지침을 토대로 타당성을 분석한다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권4호
• /
• pp.195-201
• /
• 2003

In accordance with the computerization of railway signaling systems, the interface link between signaling equipment has been replaced by a digital communication channel and the importance of this communication link has become increasingly significant. However, there are some problems with the present state of railway signaling. First, different communication protocol is applied to interfaces between signaling although they have the same functions. Next, the communication protocols currently used in the railway fields contain various illogical components such as structure, byte formation, error correction scheme and so on. To solve these matters, a new data link protocol for railway signaling systems is designed. In this paper, the structure of protocol and the results of performance analyses are presented. It will be expected to increase the safety, reliability and efficiency of maintenance of signaling systems by using the designed communication protocol for railway signaling in Korea.

• Steel and Composite Structures
• /
• 제21권5호
• /
• pp.1145-1156
• /
• 2016

To study the effects of foam core density and face-sheet thickness on the mechanical properties and failure modes of aluminum foam sandwich (AFS) beam, especially when the aluminum foam core is made in aluminum alloy and the face sheet thickness is less than 1.5 mm, three-point bending tests were investigated experimentally by using WDW-50E electronic universal tensile testing machine. Load-displacement curves were recorded to understand the mechanical response and photographs were taken to capture the deformation process of the composite structures. Results demonstrated that when foam core was combined with face-sheet thickness of 0.8 mm, its carrying capacity improved with the increase of core density. But when the thickness of face-sheet increased from 0.8 mm to 1.2 mm, result was opposite. For AFS with the same core density, their carrying capacity increased with the face-sheet thickness, but failure modes of thin face-sheet AFS were completely different from the thick face-sheet AFS. There were three failure modes in the present research: yield damage of both core and bottom face-sheet (Failure mode I), yield damage of foam core (Failure mode II), debonding between the adhesive interface (Failure mode III).

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제5권4호
• /
• pp.498-506
• /
• 1999

본 논문에서는 ATM 통신프로토콜을 위한 자동시험시스템인 ACTS(ATM Conformance Test System)의 개발과 적용을 소개한다. ACTS는 ITU-T 또는 ATM Forum의 ATM 사용자-망 접속표준을 준용하는 ATM 단말과 망장비의 프로토콜적합성을 확인하는데 사용된다. 본 논문에서는 ACTS 개발에 사용된 방법을 소개한 뒤, ACTS를 실제 ATM 단말과 장비에 적용한 사례들을 소개한다. ACTS의 적용을 통하여 시험대상 장비들이 지닌 프로토콜구현상의 문제점을 파악하였고, 문제에 대한 원인분석을 수행하였다. 또한 이러한 문제점들이 상호운용에 미치는 장애를 예측함으로써, ACTS를 상호운용하는 ATM 장비를 확보하기 위한 유용한 도구로 사용할 수 있음을 보인다.Abstract This paper presents development and application of ACTS(ATM Conformance Test System), an automated test system for ATM protocols. ACTS is a test system that checks conformance of ATM terminal and network equipment implementing either ITU-T or ATM Forum user-network interface. This paper, after presenting the methodology and process used for developing ACTS, conducts case studies of its applications to real ATM equipment. By applying ACTS, we were able to detect numerous problems in protocol implementations of ATM equipment and analyse causes of the problems, thereby demonstrating the efficacy of ACTS as an efficient automated testing tool. Furthermore, by predicting the potential effects of the problems on interoperability, we show how ACTS can be used as a useful tool for ensuring interoperable ATM equipment.