• Journal of the Korean Electrochemical Society
• /
• v.5 no.1
• /
• pp.21-26
• /
• 2002

A supercapacitor was developed using an amorphous ruthenium oxide material. The electrode of supercapacitor was prepared using an amorphous ruthenium oxide, which was synthesized from ruthenium trichloide hydrate$(RuCl_3{\cdo5}xH_2O)$. Thin film of tantalum was used as a current collector because it had wide. potential window characteristics than titanium and 575304 materials. A supercapacitor was assembled with ruthenium oxide as an electrode active material and 4.8M sulfuric acid solution as an electrolyte. The specific capacitance of the electrode was tested by a cyclic voltammetry using a half cell. The maximum differential specific capacitances during the oxidative and the reductive scans were 710 and $645\;F/g-RuO_2{\cdot}nH_2O$, respectively. The average specific capacitance was $521\;F/g-RuO_2{\cdot}nH_2O$. The assembled supercapacitor was protonated to the potential level of 0.5V vs. SCE. Super-capacitor, which was adjusted to the appropriate protonation level, had the specific capacitance of $151\;F/g-RuO_2{\cdot}nH_2O$ based on the concept of full cell.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.764-771
• /
• 1994

Electrochemical synthesis of conductive polypyrrole films was carried out in nucleophilic solvent containing p-toluenesulfonic acid or bezensulfonic acid as supporting electrolyte and dopant. Also characteristics of degradation and improvement of mechanical properties were studied. The conductivity, tensile strength and elongation of the films obtained in dimethyformamide/p-toluenesulfonic acid had the highest value of 10-40S/cm, $25N/mm^2$ and 10%, respectively. The optimum condition of electrochemical synthesis was $2mA/cm^2$ for constant current method and 0.9V for constant potential method containing 0.5M pyrrole and 0.5M p-TSA. The obtained films showed good stability in air and electrode characteristics of secondary battery by reversibility in doping and undoping. The degradation process was 1st order reaction at various temeprature. The activation energy and rate constant of degradation reaction were $1.01JK^{-1}mol^{-1}$ and $3.1{\times}10^{-7}min^{-1}$ respectively at $25^{\circ}C$. For the improvement of mechanical properties, composition of polypyrrole films with various host polymer were investigated and increase of tensile strength and elongation was confirmed.

• Journal of the Korean Society for Library and Information Science
• /
• v.46 no.2
• /
• pp.29-54
• /
• 2012

This study aims to grasp what factors affect users' recognition level and expectation level for library service, being offered at the library of Korea National Open University. Also, this study seeks to conduct a survey and analyze whether users' recognition level by library service dimensions has actually influenced the intention and the satisfaction with using the library. For this, it carried out the theoretical approach, which considers domestic and foreign documents on evaluation of quality of library service, and the empirical approach of questionnaire research and analysis. A research model was designed on the basis of LibQUAL+model to achieve the objective of this research. And the group-based difference was confirmed by carrying out verification on research hypothesis. As a result of analysis, the users' current recognition level by library service dimensions of Korea National Open University was indicated to have influence on the whole satisfaction with library and the continuous use intention. The whole satisfaction was indicated to have an effect on continuous use intention. Also, to enhance users' satisfaction level according to the behavioral characteristics of using library, the core elements for improving the library service of Korea National Open University were cited and these include improving the facility of library, implementing smart digital library system for offering remotely academic information, and securing diversity and currency of academic information sources such as printing materials and electronic materials.

• Korean Journal of Materials Research
• /
• v.20 no.4
• /
• pp.210-216
• /
• 2010

This paper investigates the dependence of a-Si:H/c-Si passivation and heterojunction solar cell performances on various cleaning processes of silicon wafers. It is observed that the passivation quality of a-Si:H thin-films on c-Si wafers depends highly on the initial H-termination properties of the wafer surface. The effective minority carrier lifetime (MCLT) of highly H-terminated wafer is beneficial for obtaining high quality passivation of a-Si:H/c-Si. The wafers passivated by p(n)-doped a-Si:H layers have low MCLT regardless of the initial H-termination quality. On the other hand, the MCLT of wafers incorporating intrinsic (i) a-Si:H as a passivation layer shows sensitive variation with initial cleaning and H-termination schemes. By applying the improved cleaning processes, we can obtain an MCLT of $100{\mu}sec$ after H-termination and above $600{\mu}sec$ after i a-Si:H thin film deposition. By adapting improved cleaning processes and by improving passivation and doped layers, we can fabricate a-Si:H/c-Si heterojunction solar cells with an active area conversion efficiency of 18.42%, which cells have an open circuit voltage of 0.670V, short circuit current of $37.31\;mA/cm^2$ and fill factor of 0.7374. These cells show more than 20% pseudo efficiency measured by Suns-$V_{oc}$ with an elimination of series resistance.

• Journal of Global Scholars of Marketing Science
• /
• v.8
• /
• pp.61-87
• /
• 2001

Internet, which has been developed as a new exchange revolution, forms a huge virtual exchange market, and the innovative electronic commerce has completely broken off the way of existing goods distribution. This study begins with an awareness of the importance of customer retention to keep winning over the competition in internet shopping mall. In order to explain of the customer retention between individual and internet shopping mall, the study introduces first a satisfaction on shopping followed by an awareness of the importance of customer retention, and looks into a formation process of trust, satisfaction, and relationship orientation occurred by the offer of valuable convenience to customers. The study also explores the influence on shopping value by the characteristics with which internet shopping mall can bear, unfold by a cause and effect relationship the degree of shopping satisfaction, trust, and relationship orientation, and inquires a question to find out how to fuse the characteristics for internet retention. Therefore, this study has the following purposes: After examining prior research for the characteristics of internet shopping mall, it presents a possibility to connect shopping value with customer retention in light of theoretical system on characteristic elements derived from emotional and utilitarian perspectives. In order to achieve the purposes, the characteristics of internet retailing shop included site design, virtual reality, web awareness, customer concern, merchandise search, information supply, product value, and transaction system. Hypotheses were set up for the relationship with these characteristics and substantially analyzed. To prove this research, we analyzed collected data in which customers had experienced in shopping at internet shopping mall and discussed strategic current issues about its analytic results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.5
• /
• pp.534-540
• /
• 2013

Interest of the hand effect on the electromagnetic wave are internationally increasing with the increase of the use of the mobile phone. IEC TC106(International Electrotechnical Commission, Technical Committee 106) promotes international research exchange program in order to reflect the effect of human hands in the standard assessment method of human exposure dosimetry by the electromagnetic wave of mobile phones. Since current commercialized hand phantom is manufactured by taking into account the average size of westerners and provides only one grip posture, it imposes many restrictions on the accurate SAR measurement. Therefore, the development of proper hand phantom accounting for domestic situation and various grip posture capability is essential in order to analyze the accurate effect of human hand on the exposure estimation. In this paper, a jelly hand phantom suitable for Korean was manufactured with various grip posture capability at 835 MHz and 1,800 MHz bands. Although the tolerances of permittivity and conductivity of the manufactured hand phantom are with ${\pm}10%$ each, it was much less than CTIA(Cellular Telecommunication Industry Association) tolerance of ${\pm}20%$ at both bands. Its 3D CAD(3 Dimensional Computer Aided Design) file which was developed can be utilized for the simulation of human hand effect on SAR measurement of mobile phones. The findings in this study can be utilized for the analysis of human hand effect on SAR measurement of a mobile phone.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.2
• /
• pp.138-144
• /
• 2020

Currently, an autonomous vehicle studies are working to develop a four-level autonomous vehicle that can cope with emergencies. In order to flexibly respond to an emergency, the autonomous vehicle must move in a direction to minimize the damage, which must be conducted by judging all the states of the road, such as the surrounding pedestrians, road conditions, and surrounding vehicle conditions. Therefore, in this paper, we suggest a passenger detection and sharing system to detect the passenger situation inside the autonomous vehicle and share it with V2V to the surrounding vehicles to assist in the operation of the autonomous vehicle. Passenger detection and sharing system improve the weighting method that recognizes passengers in the current vehicle to identify the passenger's position accurately inside the vehicle, and shares the passenger's position of each vehicle with other vehicles around it in case of emergency. So, it can help determine the driving of a vehicle. As a result of the experiment, the body pressure sensor applied to the passenger recognition sub-module showed about 8% higher accuracy than the conventional resonant sensor and about 17% higher than the piezoelectric sensor.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.3
• /
• pp.22-30
• /
• 2010

3D TV was been able to see in the market in early in this year. Tablet PC such as ipad by Apple and Galaxytab by Samsung were introduced recently. Those are possible by developing H/W and S/W of computer technology. The needs of interactive contents in many areas including education and entertainment area are increasing rapidly according to the various information devices are or will be in the market. Fore the more, GoogleTV and AppleTV are compete each other to dominate the world market in advance recently. CookTV tries to dominate in the domestic market by upgrading the current system. Diverse information devices are in the market means various size of displayers are able to be shown in our life. As TV is fused to computer, the displayer is substituted to TV's screen and the trend of TV is became bigger. The evolved TV is able to replace the computer by connecting to the network and people want to do interactions with contents by using the bidirectional communication. Therefore, it is expected to changing the human lifestyle. It is natural that contents for all members of family are needed, since TV's screen become bigger. It is required that the contents should guarantees the accessability of information to the all of family members and the easy interaction with contents. Our goal of experiment are to analyse the influence of interaction with contents as the size of images and to analyse a learning effect of contents quantitatively by applying a statistical method. Users interacted with contents without any difficulty when they met a same dimension and shape of objects as ame dimension and shape objects in their experiences or learning, was confirmed. And the learning effect were analysed and explained by applying the correlation.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.1
• /
• pp.34-39
• /
• 2018

Along with the development of ICT technology, wearable devices of various sizes and shapes have been developed. In addition, performance and specifications are rebuilt with IOT fusion products so that they can connect with the current smartphone. This is one of the general-purpose technologies of the 4th industrial revolution, which is spot-lighted with technology that changes the quality and environment of our lives. Along with this, as new technology products combining health care technology increases, various functions are provided to users who need it. Wearable technology is ongoing trend of technology development. It also sells products developed as products in the form of smart watches. At present, various related products are made in various ways, and it is recommended to use the Arduino processor in accordance with the application. In this study, we developed wearable physical activity monitoring system using open source hardware based TinyDuino. TinyDuino is an ultra-compact Arduino compatible board made on the basis of Atmega process Board, and it can be programmed in open source integrated development environment(named Sketch). The physical activity monitoring system of the welfare body can be said to be a great advantage, as a smart u-Healthcare system that can perform daily health management.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.851-860
• /
• 2020

With an increase in the aging population and a rising social interest in health and welfare, studies to improve healthcare in the elderly are being actively conducted. This study attempted to improve the current design and manufacture of elevating electric wheelchairs to enhance user safety and convenience. Seat design based on the user's body shape, convenience while boarding or alighting, caster turning radius and, safety and stability features that prevent shaking when the user gets up or sits down were improved. A driving experiment was conducted to evaluate the operation of the indoor electric wheelchair designed and manufactured with these additional functionalities. During the test, the performance parameters evaluated were continuous driving time, turning radius, maximum lifting and lowering load, maximum lifting height, noise level, minimum distance sensing by the driving auxiliary sensor, ability to interact with server and app programs, and the duty cycle maximum error rate. The test confirmed that this improved electric wheelchair successfully met target parameters. In a future study, we will evaluate this improved electric wheelchair from a user's perspective for its usability parameters, such as satisfaction, convenience and stability.