• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.2
• /
• pp.169-174
• /
• 2023

Currently, overall power usage is also increasing as power demand such as homes, offices, and factories increases. The increase in power use also raised interest in standby power as a change in awareness of energy saving appeared. Home and office devices are consuming power even in standby conditions. Accordingly, there is a growing need to reduce standby power, and it aims to have standby power of 1W or less. An intelligent outlet uses a near-field wireless network to connect to a home network and cut or reduce standby power of a lamp or appliance connected to an outlet. This research aims to develop a monitoring system and an intelligent outlet that can remotely monitor the amount of electricity used in a lighting lamp or a home appliance connected to an outlet using a short-range wireless network (Zigbee). Also, The intelligent outlet and monitoring system developed makes it possible for a user to easily cut off standby power by using a portable device. Intelligent outlets will not only reduce standby power but also be applicable to fire prevention systems. Devices that cut off standby power include intelligent outlets and standby power cutoff switches, so they will prevent short circuits and fires.

• Composites Research
• /
• v.36 no.3
• /
• pp.162-166
• /
• 2023

Although composite materials are increasingly utilized in general high-strength structures, the demand of performance characteristics as the multifunctional materials has been increased especially in the area of complex electronic devices. While the heat dissipation properties of devices are typically required properties, control of thermal property of composite material especially in the vertical direction is one of the problems to be solved due to its lamination process. In this study, CFRP was manufactured using the Vacuum filtration method for three types of solvent and CFs. In the composite material manufacturing process, the effect of solvent was examined using three solvents where solvents are most frequently used for the dispersion of fibers. Morphology of fiber was observed through a microscope to confirm the arrangement of CFs in the vertical direction. The alignment of fiber was examined through the measurement of the thermal conductivity of the manufactured specimen. For the thermal conductivity measurement, the higher thermal conductivity was obtained with the lower aspect ratio of CF. For the thermal conductivity in the through-plane direction, 8.687 W/m·K, 10.322 W/m·K, and 13.005 W/m·K of thermal conductivity was measured in the DMF, NMP and Acetone, respectively.

• Journal of Korean Society of Archives and Records Management
• /
• v.3 no.1
• /
• pp.69-92
• /
• 2003

Registration and description of records are important elements of processing which provide with the background information of production of records and business-related information. They also enable to search and use the records. In this paper, I examined the Korean registration and description system defined in the Public Records Management Act which directs the records creating agency to register records in creating offices and directs the "professional archives" to make "basic registrations" and "detailed registrations" of the records. In the analysis and comparison of two different registration and description systems with the known international standards of records and archives management, such as ISO15489 and ISAD(G), I intended to evaluate the Korean records and archives management system and suggested recommendations for the renovation of the Korean recordskeeping system. Despite we have unique office business procedures and the culture of officialdom, and despite we have developed our system based on the established business procedures and office culture, it would be preferable to adopt or follow the international standards and established best practices. After the comparative analysis, I recommended some innovations in the filed of registration and description. For instance, in the basic registration. we would better to install an item of "simple contents summary." We may also need the multiple-level description. The fonds level description and the series level description should be introduced to our archival automated management system. We need to establish a Korean standard of description adopting the rules of the ISAD(G) and ISAAR(CPF). Essential requirements for electronic records management, such as contextual and structural information, should be incorporated in the new standard. Documentation of records disposition also should be reinforced to guarantee the authenticity of records and to ensure control of the records. To implement the recommendations for the standard, we need to amend the Public Records Management Act and its Regulations and Rules. Also it is imperative to redesign the GARS integrated archival automated management system.

• Journal of Internet Computing and Services
• /
• v.14 no.5
• /
• pp.69-76
• /
• 2013

The incidence of globally infectious and pathogenic diseases such as H1N1 (swine flu) and Avian Influenza (AI) has recently increased. An infectious disease is a pathogen-caused disease, which can be passed from the infected person to the susceptible host. Pathogens of infectious diseases, which are bacillus, spirochaeta, rickettsia, virus, fungus, and parasite, etc., cause various symptoms such as respiratory disease, gastrointestinal disease, liver disease, and acute febrile illness. They can be spread through various means such as food, water, insect, breathing and contact with other persons. Recently, most countries around the world use a mathematical model to predict and prepare for the spread of infectious diseases. In a modern society, however, infectious diseases are spread in a fast and complicated manner because of rapid development of transportation (both ground and underground). Therefore, we do not have enough time to predict the fast spreading and complicated infectious diseases. Therefore, new system, which can prevent the spread of infectious diseases by predicting its pathway, needs to be developed. In this study, to solve this kind of problem, an integrated monitoring system, which can track and predict the pathway of infectious diseases for its realtime monitoring and control, is developed. This system is implemented based on the conventional mathematical model called by 'Susceptible-Infectious-Recovered (SIR) Model.' The proposed model has characteristics that both inter- and intra-city modes of transportation to express interpersonal contact (i.e., migration flow) are considered. They include the means of transportation such as bus, train, car and airplane. Also, modified real data according to the geographical characteristics of Korea are employed to reflect realistic circumstances of possible disease spreading in Korea. We can predict where and when vaccination needs to be performed by parameters control in this model. The simulation includes several assumptions and scenarios. Using the data of Statistics Korea, five major cities, which are assumed to have the most population migration have been chosen; Seoul, Incheon (Incheon International Airport), Gangneung, Pyeongchang and Wonju. It was assumed that the cities were connected in one network, and infectious disease was spread through denoted transportation methods only. In terms of traffic volume, daily traffic volume was obtained from Korean Statistical Information Service (KOSIS). In addition, the population of each city was acquired from Statistics Korea. Moreover, data on H1N1 (swine flu) were provided by Korea Centers for Disease Control and Prevention, and air transport statistics were obtained from Aeronautical Information Portal System. As mentioned above, daily traffic volume, population statistics, H1N1 (swine flu) and air transport statistics data have been adjusted in consideration of the current conditions in Korea and several realistic assumptions and scenarios. Three scenarios (occurrence of H1N1 in Incheon International Airport, not-vaccinated in all cities and vaccinated in Seoul and Pyeongchang respectively) were simulated, and the number of days taken for the number of the infected to reach its peak and proportion of Infectious (I) were compared. According to the simulation, the number of days was the fastest in Seoul with 37 days and the slowest in Pyeongchang with 43 days when vaccination was not considered. In terms of the proportion of I, Seoul was the highest while Pyeongchang was the lowest. When they were vaccinated in Seoul, the number of days taken for the number of the infected to reach at its peak was the fastest in Seoul with 37 days and the slowest in Pyeongchang with 43 days. In terms of the proportion of I, Gangneung was the highest while Pyeongchang was the lowest. When they were vaccinated in Pyeongchang, the number of days was the fastest in Seoul with 37 days and the slowest in Pyeongchang with 43 days. In terms of the proportion of I, Gangneung was the highest while Pyeongchang was the lowest. Based on the results above, it has been confirmed that H1N1, upon the first occurrence, is proportionally spread by the traffic volume in each city. Because the infection pathway is different by the traffic volume in each city, therefore, it is possible to come up with a preventive measurement against infectious disease by tracking and predicting its pathway through the analysis of traffic volume.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.1
• /
• pp.94-131
• /
• 2007

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2004 and 2005 has been done. Focus has been put on current status of research in the aspect of heating, cooling, air-conditioning, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD and flow visualization(PIV, PTV and LDV methods) technologies were widely applied for developing facilities and their systems. (2) The research trends of the previous two yews are surveyed as groups of natural convection, forced convection, electronic cooling, heat transfer enhancement, frosting and defrosting, thermal properties, etc. New research topics introduced include natural convection heat transfer enhancement using nanofluid, supercritical cooling performance or oil miscibility of $CO_2$, enthalpy heat exchanger for heat recovery, heat transfer enhancement in a plate heat exchanger using fluid resonance. (3) The literature for the last two years($2004{\sim}2005$) is reviewed in the areas of heat pump, ice and water storage, cycle analysis and reused energy including geothermal, solar and unused energy). The research on cycle analysis and experiments for $CO_2$ was extensively carried out to replace the Ozone depleting and global warming refrigerants such as HFC and HCFC refrigerants. From the year of 2005, the Gas Engine Heat Pump(GHP) has been paid attention from the viewpoint of the gas cooling application. The heat pipe was focused on the performance improvement by the parametric analysis and the heat recovery applications. The storage systems were studied on the performance enhancement of the storage tank and cost analysis for heating and cooling applications. In the area of unused energy, the hybrid systems were extensively introduced and the life cycle cost analysis(LCCA) for the unused energy systems was also intensively carried out. (4) Recent studies of various refrigeration and air-conditioning systems have focused on the system performance and efficiency enhancement. Heat transfer characteristics during evaporation and condensation are investigated for several tube shapes and of alternative refrigerants including carbon dioxide. Efficiency of various compressors and expansion devices are also dealt with for better modeling and, in particular, performance improvement. Thermoelectric module and cooling systems are analyzed theoretically and experimentally. (5) According to the review of recent studies on ventilation systems, an appropriate ventilation systems including machenical and natural are required to satisfied the level of IAQ. Also, an recent studies on air-conditioning and absorption refrigeration systems, it has mainly focused on distribution and dehumidification of indoor air to improve the performance were carried out. (6) Based on a review of recent studies on indoor environment and building service systems, it is noticed that research issues have mainly focused on optimal thermal comfort, improvement of indoor air Quality and many innovative systems such as air-barrier type perimeter-less system with UFAC, radiant floor heating and cooling system and etc. New approaches are highlighted for improving indoor environmental condition as well as minimizing energy consumption, various activities of building control and operation strategy and energy performance analysis for economic evaluation.

• Journal of Korea Multimedia Society
• /
• v.7 no.2
• /
• pp.223-230
• /
• 2004

A shooting game is all game genres that hit targets through shooting. It include a lot of genres from a flying shot of game room to a personal shooting action game. In this point, a shooting game was regarded it as the origin of all game and it was developed from the early days of game. At present we can meet it in an electronic game room or personal computer, and mobile phone etc.. The popularity of shooting game caused to take aim by simple system, interface, and speedy play. Also it was enticed everyone to enjoy it easily. A shooting games is worked from old like ways until recently and a process of playing game is intuitive than another game. Therefore it popular with a PC player as well as persons of all levels. Beginners can train this game easily through direction such as control way of object, advent way of enemy aircraft and scroll way of background. But as an usability of working and controlling game, beginners of game development can pass over a shooting sense that shout and hit basically. And after design, they will feel that cannot convey realistic effect and thrill etc.. At a result, hitting sense happens to graphic elements and sound. Therefore a measure of effect on these elements is started from analysis of good shooting game. This study was to focus on the advance effect of hitting sense in shooting game through analysis centered for 'the Beetlewing' and '1945 Plus'.

• The Korea Journal of Herbology
• /
• v.25 no.3
• /
• pp.149-157
• /
• 2010

Objective：Gagam-Gongjin-dan (GGD) is an oriental medicinal prescription composited with Cervi parvum Cornu, Corni Fructus, Angelica Gigantis Radix, Lycii Fructus, Dioscoreae Rhizoma, Citri Pericarpium, Gastrodiae Rihzoma, Agastachis Herba, Cassiae cortex, Scutellariae Radix and Schisandrae Fructus. The purpose of this study was to investigate the effects of GGD extract against acetaminophen (APAP)-induced liver injury in mice. Methods：GGD extract was prepared by extracting with methanol for 7 days. The extract was freeze-dried following filtration through vacuum distillation system. The first, we investigated the antioxidant effects of GGD extract on electronic donating ability (DPPH), nitrite (NO) scavenging and superoxide dismutase (SOD)-like activity. The next, we investigated the possible hepatoprotective effect of GGD extract administration against acetaminophen-induced liver injury in mice. Mice were orally administrated with or without GGD extract of different doses (25-100 mg/kg/day) one times per day for 6 days. After 3 days, APAP was orally applied with a single dose (400 mg/kg). Results：GGD extract increased DPPH, NO and SOD-like activities in dose dependant. APAP treatment significantly increased aspartate aminotransferase (AST) and alanine aminotransferase (ALT) activities in plasma. Also, APAP treatment significantly evaluated lipid peroxidation product thiobarbituric reacting substances (TBARS) and depleted some antioxidant enzymes (superoxide dismutase, catalase, d-aminolevulinate dehydratase and gluthathione peroxidase activities) in liver homogenates compared to the control group. However, the orally administration of GGD extract was able to counteract these effects. Histological studies provided supportive evidence for biochemical analysis Conclusions：These results suggest that GGD extract has a potential antioxidant and hepatoprotective effect against APAP-induced liver injury, these properties may contribute to liver disease care.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.4
• /
• pp.350-357
• /
• 2017

This study was conducted as a post - study on the development of a centralized controller and a hydraulic lift system including structural analysis and remote control for the development of a vertically elevated car. The safety review was carried out through the structural modification of the elevator lift which was developed during the previous research. 3D modeling was performed with Solidworks, and a model of finite element was created through Hypermesh S / W. In addition, the loading environment of the work vehicle for the evaluation is a condition in which the loading amount is 250 kg per position (total, upper, upper, lower, and lower) on the work table, ), The structural analysis was carried out under the condition that the load was 600 kg, and safety was examined in various aspects. As a result, when the allowable load of 250 kg and the excess load of 600 kg are excluded (except Case-11), the stress level is below the yield strength. In the case of Case-11, there is a region exceeding the yield strength at the center support portion of the safety bar at the upper end even after excluding the component which generates the maximum stress, but it does not affect the safety aspect of the whole structure Respectively. Looking at the deflection results, it can be seen that in all cases the maximum deflection occurs in the same table, and the tendency of sagging in both 250 kg and 600 kg is the same.

• Journal of Technology Innovation
• /
• v.23 no.3
• /
• pp.287-316
• /
• 2015

The trend of R&D in automotive electronics industry is shifting towards ECU(Electronic Control Units) based on softwares which requires technology convergence to accommodate customers' requests on safety and convenience. The trend requires systemized R&D paradigm which reflects increased role of softwares. As the softwares became the core components in automotive innovation, there has been wide range of efforts to introduce software R&D processes and methodologies such as CMMI, A-SPICE and ISO-26262 etc. However, R&D departments in the industry fields are confronted with conflicts which arise from discrepancies among the individual process. In this study, we focus on suggesting our integrated and systematic R&D process with the aim of alleviating the conflicts and confusions. For this purpose, we analyze the cases of Korean automotive electronics companies to compare various R&D processes in the field and their relationships. Based on the analysis, we derive and suggest our model of R&D process which effectively integrate ISO/TS-16949 for manufacturing quality and CMMI, A-SPICE, ISO-26262 for system with softwares.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.480-488
• /
• 2010

The aim of this study were to examine the effects of virtual reality program on balance and activities of daily living in children with spastic cerebral palsy (CP) using the Pediatric Balance Scale (PBS) and the Functional Independence Measure for Children (WeeFIM), and to measure relationship between the PBS and the WeeFIM. For this, A total of 20 spastic CP classified as the Gross Motor Function Classification System (GMFCS) I and II were employed. The Participant's were allocated randomly to 2 groups: a virtual reality group (n=10) and the control group (n=10). Both groups received muscle strengthening exercise for 3 sessions, 30 minutes per week over a 12 week period. The virtual reality group practiced additional virtual reality program. The virtual reality group showed significant increases in balance (p<0.05) and activities of daily living (p<0.05). There were a significant correlation between the PBS and the WeeFIM (p<0.05). Application of the virtual reality program to treat the spastic CP will be feasible and suitable. And the PBS was a useful tool to predict activities of daily living in the spastic CP.