• Korean Journal of Materials Research
• /
• v.25 no.8
• /
• pp.423-428
• /
• 2015

Impedancemetric $NO_x$ (NO and $NO_2$) gas sensors were designed with a stacked-layer structure and fabricated using $LaCr_xCo_{1-x}O_3$ (x = 0, 0.2, 0.5, 0.8 and 1) as the receptor material and $Li_{1.3}Al_{0.3}Ti_{1.7}(PO_4)_3$ plates as the solid-electrolyte transducer material. The $LaCr_xCo_{1-x}O_3$ layers were prepared with a polymeric precursor method that used ethylene glycol as the solvent, acetyl acetone as the chelating agent, and polyvinylpyrrolidone as the polymer additive. The effects of the Co concentration on the structural, morphological, and $NO_x$ sensing properties of the $LaCr_xCo_{1-x}O_3$ powders were investigated with powder X-ray diffraction, field emission scanning electron microscopy, and its response to 20~250 ppm of $NO_x$ at $400^{\circ}C$ (for 1 kHz and 0.5 V), respectively. When the as-prepared precursors were calcined at $700^{\circ}C$, only a single phase was detected, which corresponded to a perovskite-type structure. The XRD results showed that as the Co concentration of the $LaCr_xCo_{1-x}O_3$powders increased, the crystal structure was transformed from an orthorhombic phase to a rhombohedral phase. Moreover, the $LaCr_xCo_{1-x}O_3$ powders with $0{\leq}x<0.8$ had a rhombohedral symmetry. The size of the particles in the $LaCr_xCo_{1-x}O_3$powders increased from 0.1 to $0.5{\mu}m$ as the Co concentration increased. The sensing performance of the stack-structured $LaCr_xCo_{1-x}O_3/Li_{1.3}Al_{0.3}Ti_{1.7}(PO_4)_3$ sensors was found to divide the impedance component between the resistance and capacitance. The response of these sensors to NO gas was more sensitive than that to $NO_2$ gas. Compared to other impedancemetric sensors, the $LaCr_{0.8}Co_{0.2}O_3/Li_{1.3}Al_{0.3}Ti_{1.7}(PO_4)_3$ sensor exhibited good reversibility and reliable sensingresponse properties for $NO_x$ gases.

• Membrane Journal
• /
• v.21 no.4
• /
• pp.389-397
• /
• 2011

In this study, polymer composite membranes based on sulfonated poly(arylene ether sulfone) (SPAES) were prepared using a solution casting method with different amount of vermiculite (VMT) content. The dispersion of VMT particles in the SPAES matrix was confirmed by means of a scanning electron microscopy observation. The composite membrane containing less than 1 wt% of VMT has a smooth skin on the top and bottom, which means there is a good dispersion of VMT in the matrix. The water uptake of the composite membranes gradually increases as the temperature increases, and the results confirm that all the adsorbed water is bound water because VMT has a strong water affinity on account of its high cation exchange value. A composite membrane with a VMT content of less than 1 wt% increases the proton conductivity and reduces the methanol permeability. Of all the composite membranes, the membrane SPAES/VMT 1.0 has the best fuel cell performance in terms of membrane selectivity. The performance value of SPAES/VMT 1.0 is double that of Nafion 112, which suggests that SPAES/VMT1.0 could be an excellent candidate for direct methanol fuel cells.

• Membrane Journal
• /
• v.21 no.4
• /
• pp.377-388
• /
• 2011

Flat sheet microfiltration membranes were prepared with polysulfone (PSF), polyethersulfone (PES), and polyphenylsulfone (PPS) by an immersion precipitation phase inversion method. In this method, dimethyl formamide (DMF) and polyvinylpyrrolidone (PVP) were used as a solvent and a wetting polymer additive, respectively. 2-butoxyethanol (BE) was used as a nonsolvent additive catalyst to form pore. The morphology of membranes was investigated by scanning electron microscopy and micropermporometer. The permeability of the membranes was evaluated with the flux of pure water. When the BE was added, the pore size of membranes became larger than blank membranes. The changes in the morphology of membrane due to the BE addition depend on polymer structure. All membranes have similar mean pore size and porosity. The mean pore sizes of PSF, PES, and PPS membranes were 0.282, 0.330 $0.308{\mu}m$, respectively. The porosities of PSF, PES and PPS membranes were 68.5, 66.1, 66.4%, respectively. However, the PPS membrane showed higher pore density on surface and narrower pore size distribution than PSF or PES membrane does. As a result, the pure water flux of PPS membrane ($357L/m^2\;hr$) was higher than that of PSF ($196L/m^2\;hr$) or PES membrane ($214L/m^2\;hr$).

• Membrane Journal
• /
• v.19 no.4
• /
• pp.310-316
• /
• 2009

The degradation characteristics of cross-linked lactide/hyaluronic acid (LA/HA) membranes were investigated for purpose of applying to tissue engineering. The lactide/hyaluronic acid cross-linked with 1,3-butadiene diepoxide (BD) and 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide (EDC) was degradated in deionized water in water bath at $37^{\circ}C$. As the LA/HA mole ratio or crosslinking agent concentration decreased, the degradation rate of the crosslinked membranes increased. In order to investigate the structure change of the membrane in the degradation process, the control sample and 3, 6, 9 days-degradated samples were analysed by the nuclear magnetic resonance spectroscopy. In case of the membranes crosslinked with EDC, the HA-EDC bonding structure was degradated slowly whereas the HA-LA bonding structure was degradated quickly and dissappeared completely after 6 days. In case of the membranes crosslinked with BD, all the crosslinked bonding structure degradated slowly. The HA-BD bonding structure maintained its original state about 89, 83% in case of 3, 6 days-degardated samples respectively whereas the HA-LA bonding structure maintained its original state about 83, 65%. The scanning electron microscopy of the degradated membranes showed that the pore density in the surface, and the structure in the surface and cross section, of the before and after-degradation membranes did not change greatly, so the membranes was shown to be applied to materials for tissue engineering.

• Membrane Journal
• /
• v.27 no.6
• /
• pp.499-505
• /
• 2017

The increasing number of natural disasters resulting from anthropogenic greenhouse gas emissions has prompted the development of a gas separation membrane. Carbon dioxide ($CO_2$) is the main cause of global warming. Organic polymeric membranes with inherent flexibility are good candidates for use in gas separation membranes and poly(dimethyl siloxane)(PDMS) specifically is a promising material due to its inherently high $CO_2$ diffusivity. In addition, poly(vinyl pyrrolidine)(PVP) is a polymer with high $CO_2$ solubility that could be incorporated into a gas separation membrane. In this study, poly(dimethyl siloxane)-poly(vinyl pyrrolidine)(PDMS-PVP) comb copolymers with different compositions were synthesized under mild conditions via a simple one step free radical polymerization. The copolymerization of PDMS and PVP was characterized by FTIR. The morphology and thermal behavior of the produced polymers were characterized by transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). Composite membranes composed of PDMS-PVP on a microporous polysulfone substrate layer were prepared and their $CO_2$ separation properties were subsequently studied. The $CO_2$ permeance and $CO_2/N_2$ selectivity through the PDMS-PVP composite membrane reached 140.6 GPU and 12.0, respectively.

• Journal of the Mineralogical Society of Korea
• /
• v.6 no.1
• /
• pp.17-26
• /
• 1993

Mineralogical characteristics of tosudite from the Sungsan and Bubson mines were studied and correlated using X-ray diffraction analysis, chemical analysis and electron microscopy. Tosudite occurs as an alteration product of Cretaceous volcanoclastic rocks in both mines. It is associated with microcrystalline quartz, dickite, illite/smectite or mica/smectite mixed-layer mineral. It forms cryptocrystalline aggregates with flaky habit. XRD analysis suggests that tosudite is an 1:1regularly interstratified dioctahedral smetite/dioctahedral chlorite. Bubsoo tosudite has more(00ℓ ) reflections and more periodice stacking sequence than Syngsan tosudite. Chemical analysis shows that tosudite is a Li-bearing aluminous 1:1 regularly interstrattified mineral composed of K-bedellite and donbassite. Cookeite component may be present in the chlorite layer. Bubsoo tosudite is more Al in tetrahedral site and Ca in interlayer, but less Al in octahedral site than Sugsan tosudite. Tosudite may be formed as the intermediate alteration products, forming after muscovite and before illite/smectite or mica/s$^{\circ}C$mectite, with the range from 100 $^{\circ}C$ to 360 ~ 480 $^{\circ}C$. The hydrothermal solution forming tosudite may be acidic solution with high activities of Si and Al.

• Korean Journal of Microbiology
• /
• v.33 no.2
• /
• pp.142-148
• /
• 1997

Mrthylov~orits sp. starin SSl, a restricted facultative methylotrophic bacterium. growing on methanol was found to produce small amount of extracellular polysaccharide (EPS) under the optimal growth conditions, while it produced large amount of the polysaccharide under nitrogen limihtion. The optimal ratio of carbon to nitrogen for EPS production were found to be 5.2. The optimal temperature and pH for EPS production were 30^{\circ}C.$ and 6.5, spectively. The EPS consisted of carbohydrate, protein and small amount pyruvic acid. The reducing sugars in the EPS consisted mainly of glucose and a small amount of mannose. The EP!; treated with ethanol (EPSae) was found to have several properties different from those of the EPS which was not treated with ethanol (EPSbe); the EPSae contained no pyruvic acid. It also contained less protein and showed much lower viscosity than the EPSbe. The viscosity of EPSbe was very sensitive to NaCl and decreased t;harply upon exposure of the polysaccharide to even 0.5% (wiv) NaCl solution. The viscosity, however, was increased irreversibly upon exposure of the saccharide to high temperature. The molecular weight of EPS was estimiited to be $2.5{\times}$10^6$ - $3.5{\times}*$10^6$ using Sepharose hB column chromatography. Scanning electron microscopy revealed that the lyophilized EPSbe and EPSae have a structure of thread-like fibers and a mesh-like structure resembling bee-hive, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.6
• /
• pp.664-672
• /
• 1993

The purpose of this study was to investigate the effect of alcohol administration on selenium concentration and cell morphology in tissurs of rats fed with the different levels of selenium (Se) and vitamin E. Seventy two male rats of Sprague-Dawley strain weighing about 58~62g were divided into 12 groups. The dietary Se levels were 0mg(L-), 0.4mg(C-) and 10mg(H-), and the dietary vitamin E levels were 0mg(-L) and 150mg(-C) per kg diet, respectively. Alcohol-adminstrated groups(--A) received the triple distilled potable water solution containing 10% of ethanol from the 3rd week of experimental periods. The obtained experimental results are summarized as follows. Se concentration in blood and urine made difference in accordance with Se level in diet and tended to be low in alcohol administrated groups. Se concentration in liver and kidney was also directly proportional to the dietary Se level, and it tended to be low in each alcohol group, but Se concentration in kidney tended to be increased by alcohol administration. Myocardium in rats showed lysosome increasing, fat droplet, mitochondrial swelling, and in particular, bad intracellular edema, in H-group fed with high Se and in L-group with low Se. It also showed such phenomena in the alcohol administrated group. In HC-group fed with excessive Se and normal vitamin E. there appeared no noticeable change in liver tissue. However, in the alcohol administrated HCA-group, there came out fat droplet. Especially, in the alcohol administrated LLA-group, not fed with sufficient Se and vitamin, E, there were found lysosome increasing and a number of fat droplet.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.2
• /
• pp.94-98
• /
• 2005

Coptp films with the additive elements (X=Fe, Mn) of varying concentrations were prepared by in-situ electrodeposition, to tailor their magnetic properties. Alloys of CoPtP-X (X=Fe, Mn) were synthesized by changing the solution concentrations of Fe and Mn for electrodeposition. In the electrodeposited CoFePtP alloys, preferred orientation of the electrodeposited films changed from hexagonal (001) to (100) direction with increasing iron contents as revealed by X-ray diffraction, and these films exhibited various magnetic properties ranging from a typical hard magnetic to a soft magnetic property in accordance with microstructural variations. In the case of Mn addition, excellent hard magnetic property was observed at a specific Mn concentration of 0.0126 M in the electrolyte, with the coercivity of 4630 Oe and squareness of 0.856 and this was attributed to the fact that magnetization easy-axis (hexagonal c-axis) coincides with the preferred growth orientation of the film confirmed by transmission electron microscopy.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.2
• /
• pp.23-27
• /
• 2017

This paper proposes an approach to predict the reliability of high temperature heaters by identifying their primary failure modes and mechanisms in the field. Test specimens were designed to have the equivalent stress conditions with the high temperature heaters in the field in order to examine the effect of stress conditions on the solder joint failures. There failures often result from cracking due to intermetallic compound (IMC) or void formation within a solder joint. Aging tests have been performed by exposing the test specimens to a temperature of $170^{\circ}C$ in order to reproduce solder joint failures in the field. During the test, changes in IMC formation were investigated by scanning electron microscopy (SEM) on the cross-sections of the test specimens, while changes in void formation were monitored both by resistance spectroscopy and by micro-computed tomography (microCT), alternately. The test results demonstrated the void volume within the solder increased as the time at the high temperature increased. Also, the phase shift of high frequency resistance was found to have high correlation with the void volume. These results implied the failure of high temperature heaters can be non-destructively predicted based on the correlation.