• 한국재료학회지
• /
• 제9권9호
• /
• pp.913-918
• /
• 1999

전자파 차폐특성 측정방법의 일환으로 매질의 전기전도도로부터 차폐효과를 정성적 수준에서 예측하는 연구를 수행하였다. 사용된 시편은 전도성 금속 (Cu, Ni)이 피복된 망사형 차폐재로 두께는 0.1 mm 정도이고, 전기전도도는 6.4$\times$10~2.4$\times$10(sup)5 mhos/m 범위 값을 가졌다. 물질상수와 시편의 두께로 표시되는 반사손실 및 흡수손실의 이론식을 도출하고 상기 시편에 대해 차폐효과를 계산하였다. 전도성 피복재의 경우 주된 차폐기구는 반사손실임을 밝힐 수 있었으며, 전기전도도가 증가함에 따라 차폐효과는 현저히 증가함을 알 수 있었다. 이들 이론치를 임피던스 실측치로부터 계산된 반사손실과 비교한 결과 10 dB 이내의 오차를 보임으로써 제안한 분석방법의 타당성을 입증하였다.

• 한국건설순환자원학회논문집
• /
• 제9권4호
• /
• pp.478-482
• /
• 2021

본 논문에서는 버려지는 전기로산화슬래그를 재활용하여 차폐용 콘크리트를 제작하는데 있어 필요한 차폐효과 측정방법에 대하여 연구하였다. 차폐용 콘크리트 블록의 전자파 차폐효과를 측정하기 위한 시스템의 결과와 실제 콘크리트로 구축된 건축물의 차폐효과를 비교하여, 소형화된 콘크리트 블록의 전자파 차폐효과 측정 시스템의 유효성을 검증하였다. 콘크리트 건축물의 크기는 2.9 × 2.9 × 3.4m이고 콘크리트 블록은 0.3 × 0.3 × 0.2m로 차폐효과 측정 방법은 MIL-STD-188-125-1을 준용하였다. 비교하여 위하여 사용되는 주파수 대역은 600MHz - 2GHz이고 비교되는 콘크리트의 구성은 일반적인 콘크리트와 전기로산화슬래그가 포함된 콘크리트이다. 콘크리트 구조물의 경우에는 구조적 안전성을 위하여 철근이 15cm 간격으로 설치되어 있지만, 철근의 전자파 특성을 주파수가 증가할수록 차폐효과 특성이 점점 감소하기에 두 비교대상의 측정결과에서 약간의 차이가 발생하였다. 결론적으로는 콘크리트 블록을 통한 차폐효과 측정결과는 건축물을 만들었을 때의 결과와 유사하여, 전자파 엔지니어링 설계에 충분히 활용할 수 있을 것으로 생각되고 표준시편을 활용한 콘크리트의 차폐효과 측정 시스템이 유효함을 검증하였다.

• 아태비즈니스연구
• /
• 제11권3호
• /
• pp.307-344
• /
• 2020

Purpose - The purpose of this study is to examine effects of productization and organizational competences on export performance of electromagnetic shielding companies and to analyze moderating effects of overseas market adaptation competences. For this, hypotheses were established by reviewing previous studies and an empirical analysis was conducted for testing. Design/methodology/approach - For this study, a survey was conducted for workers at electromagnetic shielding companies and 250 valid responses out of 300 questionnaires were aquired. A frequency analysis of related variables was conducted. Through an exploratory factor analysis, validity and reliability tests of measuring tools were conducted and a descriptive statistics was analyzed for collected data result and hypotheses testing. Findings - A correlation analysis was conducted to examine relationships among variables. Construct, convergent and discriminant validities were analyzed after a confirmatory factor analysis and a multi-group confirmatory factor analysis. Finally, with a verified model, the hypotheses and the moderating effects were tested. The results are as follows: First, the productization competence has a positive effect on export performance; Second, the organizational competence has a positive effect on export performance. Especially, the organizational competence has more effect on export performance than the productization competence. Although a development of new technology and product is important in terms of performance, along with these competences, a way of acquiring new skills and knowledge, and internalization and adaptation in organizations have more effect on export performance. Third, overseas market adaptation competence moderates effects of organizational and productization competences. Research implications or Originality - It is necessary to seek out opportunities for workers to participate in actively, such as conferences and seminars, to strengthen organizational competence. It is strongly believed that a constant development of high quality product will contribute to export performance. Lastly, in a policy level, supports on SMEs by governments are to be strengthened by providing with finance and human resource.

• 한국터널지하공간학회 논문집
• /
• 제17권2호
• /
• pp.107-115
• /
• 2015

전력구 방식의 지중 송전선로 시공시 TBM 공법이 널리 적용되고 있으며, 세그먼트의 구조적 특징에 따라 강섬유 보강 콘크리트를 이용한 세그먼트의 개발과 사용이 크게 증가하는 추세이다. 그러나 최근 지중 송전선로 구간에서의 전자파 유해성에 대한 문제가 대두되고 있으며, 세그먼트 제작시 투입되는 강섬유의 영향으로 콘크리트의 전기전도성 등이 변화되고, 이로 인하여 더 많은 전자파가 지상에서 계측될 수 있다는 우려가 야기되고 있다. 따라서 본 연구에서는 강섬유 보강 유무 및 사용량 변화조건에 따른 전자파의 차폐효과를 분석하기 위하여, 3가지 조건에 대한 실험체를 제작하여 관련 실험을 수행하였으며, 실험결과 강섬유 보강콘크리트와 전자파 발생 상관관계는 없는 것으로 나타났다.

• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.843-850
• /
• 1991

There is a growing demend for absorptive electromagentic shielding materials for wide band frequency application. In this study, the absorber which consists of a rubber plus Ni-Zn ferrite which have been prepared by direct-wet method. A rubber ferrite composite for electromagnetic shielding, it is most importan facter the homogeneous ultra fine size and high dispersitive ferrite powder. Direct-wet method and solid-solid reaction method for preparing of ultra fine ferrite powder was used. It has been experimentally verified that the powder which prepared by direct-wet method was very fine and almost same size spherical powder, the composite ferrite have excellent electromagnetic wave absorption in X-band.

• 한국표면공학회지
• /
• 제50권5호
• /
• pp.373-379
• /
• 2017

Dry processes like evaporation and sputtering in vacuum chamber are difficult to make a uniform, large area and high quality film on thin PET substrate because of PET degradation and bad adhesion. On the other hand, wet processes like electro or electroless plating have complex processes and require high environmental cost. In this study, we successfully prepared $2{\mu}m$ Zn/Cu/Ni multilayers coated on $12{\mu}m$ polyethylene terephthalate (PET) substrate by using dry-wet mixing processes. Their surface electric resistances were evaluated around $0.2{\Omega}$ by using 4 probe measurements. Furthermore, their corrosion resistance also evaluated by natural potential test and compared with other wet, dry and mixing process samples.

• 대한전자공학회논문지TC
• /
• 제47권5호
• /
• pp.60-68
• /
• 2010

통신서비스에 장애를 유발하는 전력선에 의한 전자유도 현상에 대한 방호를 위하여는 유도전압을 평가하여야 하고 상응한 대책을 수행하여야 한다. 유도전압을 평가하는 방식은 ITU 규격과 일본 유도자료로부터 국내에 도입되어 법률 고시화되어 있는데 이것으로 수용되지 못하는 유도 커플링상의 제원 요소들이 있다. 본 논문에서는 계산 수행 적용이 곤란한 범위를 포괄할 수 있도록 좀더 일반화된 고전적 유도 및 전자파 원론 해석 근간의 전자계 형성에 의한 소스와 관측점의 유도전압 산출 방식에 대한 기술을 분석하여 제시하였다.

• 한국전기전자재료학회논문지
• /
• 제23권7호
• /
• pp.554-559
• /
• 2010

In this paper, we analyzed the frequency spectrum of radiated electromagnetic pulses generated by series arc- and corona- discharges as a basic study to develop an on-line diagnostic technique for power facilities installed inside closed-switchboards. To simulate series arc and corona discharges, five types of electrode system which consists of needle and plane electrodes were arranged. The experiment was carried out in an electromagnetic shielding room, and the measurement system consists of an ultra log antenna and an EMI receiver. From the experimental results, the frequency spectrum exists in ranges from 30 MHz to 2 GHz for a series arc discharge and 30 MHz to 1.2 GHz depending on defects for a corona discharge. The peak frequency of the series arc- and corona- discharges were 100 MHz to 160 MHz and 40 MHz to 80 MHz, respectively.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.205-206
• /
• 2011

Cu thin films for electromagnetic wave shielding were prepared on PET film and Ni-coated PET film by using Dry and Wet coating method, such as evaporation method, DC sputtering method and copper sulfate($CuSO_4$). After that, Zn thin film and Ni thin film were prepared onto the Cu thin films by using evaporation dry process and Ni electro plating wet process as a finishing treatment, respectively. The result of conductivity test and corrosion resistance test revealed Cu thin films which were formed with bigger grain size and high Cu composition rate have superior properties. Zn thin film by dry evaporation process and Ni thin film by wet electro plating process on Cu thin films were largely contributed to corrosion resistance. However, Ni thin film by wet process made conductivity of all specimen worse, the other hand, Zn thin film by dry process made it better to improve condictivity of specimens just prepared by dry process.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.785-787
• /
• 2002

Conductivity and transmittancy of ZnO is very excellent and the price is low. So the study of transparent electrode materials and electromagnetic wave shielding wall is actively in progress. We add $Al_2O_3$(0.0, 2.0, 3.0, 5.0wt%) to ZnO and observe microscopic structure and conductivity. For XRD observation, Al peak of AZO is increased by increasing the amount of $Al_2O_3$. We observe that the size of grain is reduced by increasing the liquid phase of grain boundary to SEM observation. Conductivity of AZO is increased by increasing the amount of $Al_2O_3$. We confirm the application possibility of the materials for electromagnetic wave reflection materials.