• Journal of Powder Materials
• /
• v.16 no.6
• /
• pp.424-430
• /
• 2009

Electromagnetic wave energies are consumed in the form of thermal energy, which is mainly caused by magnetic loss, dielectric loss and conductive loss. In this study, CNT was added to the nanocrystalline soft magnetic materials inducing a high magnetic loss, in order to improve the dielectric loss of the EM wave absorption sheet. Generally, the aspect ratio and the dispersion state of CNT can be changed by the pre-ball milling process, which affects the absorbing properties. After the various ball-milling processes, 1wt% of CNTs were mixed with the nanocrystalline $Fe_{73}Si_{16}B_7Nb_{3}Cu_1$ base powder, and then further processed to make EM absorption sheets. As a result, the addition of CNT to Fe-based nanocrystalline materials improved the absorption properties. However, the increase of ball-milling time for more than 1h was not desirable for the powder mixture, because the ballmilling caused the shortening of CNT length and the agglomeration of the CNT flakes.

• Journal of Powder Materials
• /
• v.14 no.4
• /
• pp.261-264
• /
• 2007

The electromagnetic wave (EM) absorption properties of various particle size have been investigated in a sheet-type absorber using the $Fe_{73}Si_{16}B_{7}Nb_{3}Cu_{1}$ alloy powder. With decreasing the average particle size, the complex permeability (${\mu}_{r}$) and permittivity (${\varepsilon}_{r}$) increased and the matching frequency is shifted toward lower frequency. The fabricated EM wave absorbers showed permeability $2{\sim}6$, permittivity $17{\sim}23$ for a $-325{\sim}+400$ mesh sample, and the calculated power absorption was as high as 80% in the frequency range over 2 GHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.994-1000
• /
• 2001

With the development of electromagnetic communication technology and increased use of electromagnetic wave, the countermeasure of EMI(Electromagnetic Interference) becomes more important socially, and interest for the electromagnetic wave absorber has also increased. In this paper, we have studied characteristics of frequency dependency on complex permittivity and complex permeability according to the changes of composition rate and sintering temperature of NiCuZn ferrite also known as electromagnetic wave absorber and further looked into effect of electromagnetic wave absorption properties. From the measurement where the composition of $Fe_2O_3$ and ZnO of NiCuZn ferrite was fixed at 49 and 34 mol% respectively while composition of NiO and CuO has been varied at each test, we found out that Initial permeability and permittivity were high and the absorbing ability of electromagnetic wave recorded best with $loss tangent(=\mur"/\mur')$ displays more than 1 within the frequency band of 2MHz~9.5MHz when the composition ratio of NiO was ranged around 8.5~9.5 mol% and the sintering temperature was $1080^{\circ}C$.TEX>.

• Journal of electromagnetic engineering and science
• /
• v.9 no.1
• /
• pp.46-52
• /
• 2009

This paper conducts a study on the frequency-dependent filtering and blocking effects of a variety of periodic structures, dubbed frequency selective surface(FSS). The periodic structures of interest are 1D and 2D repeated patterns of metal patches or slots sitting on the interface between the two different regions in the layered media which will show the capacitive or inductive behaviors and incorporated with the electromagnetic bandgap(EBG) geometry as another stratified media. Besides the normal substances so called double positive(DPS)-type in the layered media, metamaterials of double negative(DNG) are considered as layering components on the purpose of investigating the unusual electromagnetic phenomena. Frequency responses of transmission(absorption in terms of scattering) and reflection will be calculated by a numerical analysis which can be validated by the comparison with the open literature and demonstrated for the periodic structures embedding metamaterials or not. Most importantly, numerous examples of FSS will present the useful guidelines to have absorption or reflection properties in the frequency domain.

• Journal of Powder Materials
• /
• v.14 no.5
• /
• pp.303-308
• /
• 2007

The oxidation of $Fe_{73}Si_{16}B_7Nb_3Cu_1$ nanocrystalline powder has been conducted to investigate its influence on the electromagnetic wave absorption characteristics of the soft magnetic material. Oxidation occurred primarily on the surface of nanocrystals. Oxidation reduced the real part of complex permeability due to the reduction of the relative volume of the powder, which otherwise contributes to the permeability. Oxidation reduced the absorption efficiency of the sheet at frequencies over 1GHz, indicating that the relative contribution of skin depth increments to the absorption was not significant. The pulverization and milling process lowered the optimum crystallization temperature of the material by $40{\sim}50^{\circ}C$ because of the internal energy accumulated during the fragmentation and powder thinning processes.

• Journal of the Korean Institute of Navigation
• /
• v.15 no.4
• /
• pp.13-25
• /
• 1991

Recently, according to the development of electromagnetic wave technique, more frequent and powerfull wave radiation becomes inevitable and so electromagnetic environments has become worse accordingly. Electromagnetic wave absorber is known the most effective preventive remedy to cope with the EMI/EMC problem. To realize broad-band electromagnetic wave absorber, triple layered structure where an air layer is interposed between a sintered ferrite layer and a ruber ferrite layer was adopted. Computer simulation for optimum design and evaluation of absorption characteristics has been made. The results shows that designed broad-band electromagnetic wave absorber can be useful for EMI/EMC problem, especially reducing TV ghosts in both VHF and UHF bands by additionally an air layer and a thin rubber ferrite layer on the surface of conventional ferrite, without replacing it.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.1-5
• /
• 2018

The property of magnetic field and properties of EMW(Electro Magnetic Wave) absorption with multi-shaped EMW absorber was simulated. As a magnetic field having high density was showed at bottom of EMW absorber, simulation showed that overall EMW was absorbed at the bottom of multi-shaped absorber. The absorption properties of EMW according to thickness of absorber showed that it enhanced about 50-60 percent. Also, EMW absorption properties was checked with surface area of EMW absorber. A cylinder-shaped EMW absorber exhibited good property among multi-shaped EMW absorber based on these result.

• Journal of Navigation and Port Research
• /
• v.27 no.1
• /
• pp.71-74
• /
• 2003

Electromagnetic wave absorbers with sheet type have been fabricated and their absorption properties are measured. The absorbtion properties of the fabricated ferrite absorbers were improved with decreasing the particle size in the frequency range of 2.4~3.2 GHz.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1994.10a
• /
• pp.79-90
• /
• 1994

The goal of this research is to get a measuring system for absorption characteristics of electromagnetic wave absorbers in ferrite type which are lat grid-type special type etc. It is however very difficult to measure the absorption characteristics as in low frequency as in 30 MHz, To solve the problem therefore we propose a standing wave method and a measurement method in time domain using parallel striplines construct the measuring system and measure the characteristics of ferrite microwave absorbers in grid type using the proposed measuring system.

• Journal of information and communication convergence engineering
• /
• v.13 no.1
• /
• pp.36-41
• /
• 2015

With the rapidly increasing and widespread use of electronic and controlling equipment, the control of the electromagnetic (EM) wave environment becomes an important social issue. To solve the electromagnetic compatibility (EMC, both electromagnetic interface and electromagnetic susceptibility) problems, in this paper, we introduce the countermeasure techniques focused on EM wave absorbers for EMC problems in our laboratory at the Korea Maritime and Ocean University. The current technologies related to EM wave absorbers to solve EMC problems will first be described. The prospects of and a design for EM wave absorbers including a smart absorber with a heat radiating function will then be suggested.