• Journal of information and communication convergence engineering
• /
• 제15권4호
• /
• pp.237-243
• /
• 2017

This paper presents an analysis of the electromagnetic interference of a heterogeneous power bus where electromagnetic bandgap (EBG) cells are irregularly arranged. To mitigate electrical-noise coupling between high-speed circuits, the EBG structure is placed between parallel plate waveguide (PPW)-based power buses on which the noise source and victim circuits are mounted. We examine a noise suppression characteristic of the heterogeneous power bus in terms of scattering parameters. The characteristics of the dispersion and scattering parameters are compared in the sensitivity analysis of the EBG structure. Electric field distributions at significant frequencies are thoroughly examined using electromagnetic simulation based on a finite element method (FEM). The noise suppression characteristics of the heterogeneous power bus are demonstrated experimentally. The heterogeneous power bus achieves significant reduction of electrical-noise coupling compared to the homogeneous power buses that are adopted in conventional high-speed circuit design. In addition, the measurements show good agreement with the FEM simulation results.

• 한국정보통신학회논문지
• /
• 제20권2호
• /
• pp.237-244
• /
• 2016

본 논문에서는 주상변압기의 내부 부분방전에 의한 방사 전자파를 예측하기 위해 원통형 캐비티의 구조 및 크기 변화에 따른 1차측, 2차측 전극의 부싱을 통해 방출되는 방사 전자파 특성을 FDTD 법으로 검토하였다. 그 결과, 원통형 캐비티의 구조에서 1차측 및 2차측 부싱에서 방사되는 방사 전자파를 확인할 수 있었다. 원통형 캐비티 외함의 구조에 대한 방사 전자파의 주파수 특성을 검토하고 제작한 원통형 캐비티의 실험을 통해 이론 계산 결과와 비교 검토하였다.

• 한국세라믹학회지
• /
• 제36권6호
• /
• pp.571-576
• /
• 1999

This paper describes both electromagnetic properties and electromagnetic-wave absorbind (EMA) characteristics of the radar absorbing coating materials in the microwave frequencies. The coating materials are prepared by mixing ferrite powder with epoxy resin polymers. The electromagnetic property and the EMA characteristics of the coating materials are measured in the frequency ranges between 0.2 GHz and 15GHz using the S-parameter method. The results show that the typical coating material has ({{{{ {μ }`_{r } ^{' } }} of about 2 and ({{{{ { ε}`_{r } ^{' } }} of about 4. And the coating materials have a little EMA characteristics in the frequency from 4 to 6 GHz and more improved EMA characteristics around 12 GHz And it is desirable for improvement of the EMA characteristics of the coating materials to properly select electromagnetic properties of constitutional materials inthe interesting frequency ranges.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1996년도 The Korean Institute of Navigation 1996년도 한·중 국제학술 심포지움 및 추계학술발표회 논문집
• /
• pp.125-134
• /
• 1996

A design method of double layered electromagnetic wave absorbers with cross-shaped ferrite prominence in the second layer which has broad band frequency characteristics was proposed. The broad band electromagnetic wave absorber can be designed under some approximations by the theoretical model using the equivalent material constants method for the second layer. Based on the developed model broad band electromagnetic wave absorbers with excellent reflectivity frequency characteristics in the frequency range of 30MHz to 3,990MHz were designed.

• 대한기계학회논문집B
• /
• 제32권3호
• /
• pp.235-240
• /
• 2008

The large size electromagnetic flowmeter was tested to investigate the variation of its error characteristics in the range of low velocity under 0.6 m/s using flowmeter calibration system. For the two case of valve opening rate 100 % and 50 %, these tests were undertaken three times each for twelve velocity condition from $0.05\;^m/s\;to\;0.6\;^m/s$ with increment of $0.05\;^m/s$. It is shown that error characteristic of electromagnetic flowmeter was stabilized within ${\pm}0.4%$ of rate both higher than $0.25^m/s$ of velocity condition and 50 % of valve opening position. But, measurement deviation of flowmeter for ${\Phi}400mm\;and\;{\Phi}600mm$ was out of expected deviation range. It is necessary to correction with calibration. In conclusion, error characteristic of electromagnetic flowmeter wasn't changed proportion to its size.

• 한국항해학회지
• /
• 제18권2호
• /
• pp.151-158
• /
• 1994

A wide band design method of an electromagnetic wave absorber using exponentially tapered ferrite, which has very wide band frequency characteristics, is proposed and discussed. The wide band electroma-gnetic wave absorber can be designed by the proposed equivalent material constants method for the re-gions varying spatially in the shape of ferrite. Futhermore, the wide band ferrite electromagnetic wave absorber with taper, which have not only exce-llent reflectivity frequency characteristics but also the band width of 30MHz to 2150 or 2450MHz under the tolerance limits of -20dB reflectivity, were designed.

• Nuclear Engineering and Technology
• /
• 제25권1호
• /
• pp.178-191
• /
• 1993

전자기 필터는 기존의 냉각수 정화계통에 대한 기술적 대체물로 주목받아 왔다. 그러나 현재로선 전자기 필터의 물리적 현상에 대한 명확한 이해나 이론적 접근이 몹시 부족한 상태이다. 이러한 이유로 전자기 필터의 실제 적용에 어려움이 있으며, 우수한 성능에도 불구하고 광범위하게 상업화되지 못한 상태이다. 저출력 전자기 필터를 사용한 본 실험적 연구에서는 다양한 운전 변수들이 변하는 조건에서 전자기 필터의 특성에 관한 연구를 수행하였다. 단, 전자기 필터의 구체적 수치등은 필터마다 다르므로 부차적인 것으로 간주되었다. 실험에 사용된 불순물은 강자성의 사삼산화철과 반자성인 산화제일구리를 사용하였으며, 측정된 자료에 대해서는 회귀분석을 실시하였다. 그 결과로 효율 대 시간, 효율 대 필터부하, 필터부하대 시간에 대한 근사 방정식이 얻어졌다. 본 실험에서 얻어진 전자기 필터의 일반적 특성은 지금까지의 연구와 잘 일치하는 것을 보였으며, 특히 본 연구에서는 지금까지의 연구들에서 밝혀진 특성들을 설명하기 위하여 물리침착등의 몇가지 가설이 제시되었다

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.107-110
• /
• 2003

The electromagnetic intereference(EMI) shielding is very essential for commercial and military purposes. We fabricated multi-walled carbon nanoube(MWNT)/epoxy composites and studied the electromagnetic characteristics of the composites before we study the characteristics of MWNT-filled glass fiber-reinforced composites. After setting up the fabrication process, we measured the permittivities of MWNT/epoxy composites with process variables and MWNT concentrations in X-band(8.2GHz- 12.4GHz). Process variables changed the degree of dispersion, which influenced permittivities and permittivities increased rapidly from 0.5wt% to 1.0wt%.

• 한국전자파학회논문지
• /
• 제9권5호
• /
• pp.621-629
• /
• 1998

본 논문에서는 유한요소법을 사용하여 불균일 손실터널내의 전자파 전파특성을 해석하고 있다. 해석 방법으로서는 무손실 도파관내에 유전체를 삽입시킨 도파관 필터의 해석방법을 확장하여 손실터널내의 전자파 전파문제를 해석하고 있다. 수치해석의 결과, 손실터널내에서 일어나는 전자파의 감쇠는 손실벽면의 매질정수와 폭에 따라 크게 영향올 받는다는 것올 알 수 있었다. 또한, 모드간의 직교생으로부터 기본모드와 고차모드를 분리하여 고차모드의 발생정도와 모드에 따른 전따특성도 검토하고 있다. 해석결과의 타당성올 확인하기 위해 제작된 손실터널의 전파특성의 실험결과를 이론치와도 비교 검토하고 있다.

• 전자공학회논문지A
• /
• 제28A권12호
• /
• pp.19-23
• /
• 1991

A method for suppressing unwanted resonance modes by attaching an electromagnetic wave absorber onto a metal case was studied to prevent performance deterioration of electronic devices. The electromagnetic wave absorber fabricated for this study had an attenuation characteristics above 20dB in the frequency band from 450MHz, 1150MHz. A rectangular cavity resonator whose resonance frequencies of TE$_{101}$, TE$_{102}$ modes were 900MHz, 1250MHz, respectively, was made to measure attenuation for the electromagnetic wave absorber-metal assembly. The result showed that the resonance mode for high attenuation was sensitive to the location of electromagnetic wave absorber, and the attenuation characteristics above 20dB could be obtained when electromagnetic wave absorber was properly positioned.