• 자원리싸이클링
• /
• 제27권5호
• /
• pp.9-13
• /
• 2018

화학반응의 평형상수는 표준자유에너지변화와 관련된다. 평형상수는 반응물과 생성물의 활동도의 비이며 수용액에서 이온강도의 증가로 인한 용질의 비이상성을 고려할 필요가 있다. 묽은 전해질용액에서 이온의 활동도계수를 구할 수 있는 식인 Debye-$H{\ddot{u}}ckel$ 식의 유도과정과 확장식을 설명하였다. 전해질의 평균활동도계수의 실험값로부터 이온의 활동도계수를 구하는 방법을 설명하였다.

• Corrosion Science and Technology
• /
• 제10권2호
• /
• pp.71-75
• /
• 2011

Corrosion properties of Al-0.3Ga-0.3Sn, Al-0.3Mn-0.3Ga, and Al-0.3Mn-0.3Sn alloys were examined to develop an anode material for Al-air battery with alkaline aqueous or ethanol electrolyte. The results of potentiodynamic polarization tests showed that the electrode potential of the Al alloys were lower than the pure Al, implying the cell voltage can be increased by using one of these alloys for an anode in 4 M KOH aqueous solution. The corrosion rate appeared to be increased by alloying Ga but to be reduced by Sn and Mn in the aqueous solution. The ethanol solution is expected to improve the cell performance in that the electrode potential and the corrosion rate of Al were lower in ethanol solution than in aqueous solution. However the Al-(Ga, Sn, Mn) alloys are not favorable in ethanol solution because of the high potential and corrosion rate.

• Corrosion Science and Technology
• /
• 제23권4호
• /
• pp.334-342
• /
• 2024

The need for efficient and sustainable energy storage solutions has emerged due to a rapidly increasing energy demand and growing concerns about environmental issues. Among various energy storage methods, lithium secondary batteries are widely used in a variety of electronic devices such as smartphones, laptops, electric vehicles, and large-scale power storage systems due to their high energy density, long lifespan, and cost competitiveness. Recently, all-solid-state batteries (ASSBs) have attracted great attention because they can reduce the risk of fire associated with liquid electrolytes. Additionally, using high-capacity alternative anodes and cathodes in ASSBs can enhance energy density. However, ASSBs that use solid electrolytes experience a degradation in their electrochemical performances due to resistance at solid-solid interfaces. These interfaces can also result in poor physical contact and the presence of products formed from chemical and electrochemical reactions. Solving this interface problem is a critical issue for the commercialization of ASSBs. This review summarizes interfacial reactions between the cathode and solid electrolyte, along with research aimed at improving these interactions. Future development directions in this field are also discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2250-2254
• /
• 2007

Comprehensive analytical models focusing on the anode water loss, the cathode flooding, water equilibrium, and water management strategy are developed for polymer electrolyte fuel cells. Analytical solutions presented in this study are compared with two-dimensional computational results and shows a good agreement in predicting those critical characteristics of water. General features of water concentration profile as a function of membrane thickness and current density are presented to illustrate the net effect of the back-diffusion of water from the cathode to anode and the water production by the cathode catalytic reaction on water transport over a fuel cell domain. As one of practical applications, the required humidity level of feed streams for full saturation at the channel outlets are investigated as a function of the physical operating condition. These analytical models can provide good understanding on the characteristic water

• Macromolecular Research
• /
• 제17권10호
• /
• pp.763-769
• /
• 2009

A chromatographic method is used to measure interactions between dissimilar proteins in aqueous electrolyte solutions as a function of ionic strength, salt type, and pH. One protein is immobilized on the surface of the stationary phase, and the other is dissolved in electrolyte solution conditions flowing over that surface. The relative retention of proteins reflects the mean interactions between immobile and mobile proteins. The osmotic cross second virial coefficient calculated by assuming a proposed potential function shows that the interactions of unfavorable proteins depend on solution conditions, and the proposed model shows good agreement with the experimental data of the given systems.

• 한국레이저가공학회지
• /
• 제13권4호
• /
• pp.21-24
• /
• 2010

Plasma electrolyte oxidation (PEO) surface treatment of magnesium alloy, an optical analysis method through reflection spectra were measured. As a result, the sample is formed on the membrane form of MgO or $Mg(OH)_2$ is in the form of oxide. The wavelength energy of surface treatment of magnesium alloy sample observed 0.23eV red shift. The measured reflectance spectra observed with the three different signals. This is due to $Mg(OH)_2$ oxide layer formed on porous hole.

• 한국표면공학회지
• /
• 제21권4호
• /
• pp.149-159
• /
• 1988

Electrodeposition of chromium from low concentration chromjum (III) sulfate complexess in aqueous using sodium formate-glycine mixtures as a complexing agent was studied. In the bath formation, it is found that the optimum again temperature and time for equilibration of the electrolytes are nrcessary for 24 hrs at 45$^{\circ}C$and the optimum elecrical charge for low current electrolysis which might be produced Cr(II) ions in the electrolytes is necessary for minum 2Ah/$\ell$. The optmun concentration off standard electrolyte for main composition is 0.05M chromium(III) sulfate, 0.2M sodium formate-0.2M glycine, and I mMNaSCN as a catalysea, respectivwly. The standard electrolyte is shows good covering, good throwing power, and 6% of current efficiency (Cr(III)basis). The oppearance of electrodeposits shows att active bright chromium. The SEM morphology of the chromjum coating is observed as smooth surfaces and dispersed micro prcro pores. X-ray diffraction analysis shows a bcc structure which the perferred orintation of the chromium electrodeposits is strongin(200)plane.

• 한국분말재료학회지
• /
• 제24권1호
• /
• pp.17-23
• /
• 2017

In this study, a finite element analysis approach is proposed to predict the fluid-structure interaction behavior of active materials for lithium-ion batteries (LIBs), which are mainly composed of graphite powder. The porous matrix of graphite powder saturated with fluid electrolyte is considered a representative volume element (RVE) model. Three different RVE models are proposed to consider the uncertainty of the powder shape and the porosity. P-wave modulus from RVE solutions are analyzed based on the microstructure and the interaction between the fluid and the graphite powder matrix. From the results, it is found that the large surface area of the active material results in low mechanical properties of LIB, which leads to poor structural durability when subjected to dynamic loads. The results obtained in this study provide useful information for predicting the mechanical safety of a battery pack.

• 대한전자공학회논문지
• /
• 제27권7호
• /
• pp.1042-1048
• /
• 1990

The approximations of charge relationships at normally doped semiconductor interfaces were qualitatively derived basis on electrical neutrality conditions. Effects of ion adsorptions, activation processes, interfacial structures, rectifying phenomena, and effects of surface potential barriers at the p- and n-Si/CsNO3 aqueous electrolytes, and the p-Si/(1HF:3HNO3:6H2O) electrolyte solutions were investigated using a cyclic voltammetric method. The space charge acts the most important role for the pn junction structures, the rectifying phenomena, and the activation processes. The Current-Voltage (I-V) characteristics curves significantly depend on developing of the Helmholtz double layers and charging of the show surface states during the activation processes. A linear Current-Voltage characteristics region was observed at the p-Si/(1HF:3HNO3: 6H2O) electrolyte solution interface.

• 공업화학
• /
• 제24권5호
• /
• pp.443-455
• /
• 2013

혼합되지 않는 두 용액 사이의 계면(interface between two immiscible electrolyte solutions, ITIES)에서의 전하 이동 반응에 대한 전기화학적 연구는 이온 검출용 센서, 바이오센서, 생체막 모델링, 약물 전달 반응, 상전이 촉매반응, 연료 생성, 태양에너지 전환 등을 포함한 다양한 연구 분야에 적용이 가능하기 때문에 크게 주목받고 있다. 특히 ITIES에서의 이온 전이 반응을 이용하여 이온물질 및 생물질 등을 검출할 수 있는 센서로 개발하기 위해 불안정한 ITIES의 한 쪽 액체층을 젤(gel)화하여 안정화하고, 마이크로 계면 형성을 통해 전압강하를 최소화 시키는 등의 연구가 활발하게 이루어졌다. 본 총설에서는 ITIES 계면에서의 이온 전이 반응을 이용하여 개발된 다양한 센서의 원리와 응용 및 발전 가능성에 대해 다루고자 한다. ITIES 계면을 (i) 보편적인 액체/액체 계면형, (ii) 마이크로피펫 팁형, (iii) 고분자 박막에 형성된 단일 마이크로홀 또는 마이크로홀 어래이형 및 (iv) 실리콘 기판에 제작된 마이크로홀 어래이형으로 분류하고, 이들 계면에서의 직접적인 이온 전이 반응과 보조 이온 전이 반응을 활용하여 수질 환경 오염의 원인이 되는 이온 및 농약 성분을 선택적으로 검출할 수 있는 이온 선택성 센서와 생물질을 분석할 수 있는 바이오센서 개발 연구에 대해 초점을 두고 소개하려 한다.