• Title/Summary/Keyword: electrolysis

검색결과 802건 처리시간 0.03초

고온수전해용 Ni/YSZ와 Cu/YSZ 환원극의 미세구조 및 전기전도도 비교 (Comparison of Microstructure and Electrical Conductivity of Ni/YSZ and Cu/YSZ Cathode for High Temperature Electrolysis)

  • 김종민;신석재;우상국;강계명;홍현선
    • 한국재료학회지
    • /
    • 제18권7호
    • /
    • pp.384-388
    • /
    • 2008
  • Hydrogen production via high high-temperature steam electrolysis consumes less electrical energy than compared to conventional low low-temperature water electrolysis, mainly due to the improved thermodynamics and kinetics at elevated temperaturetemperatures. The elementalElemental powders of Cu, Ni, and YSZ are were used to synthesize high high-temperature electrolysis cathodecathodes, of Ni/YSZ and Cu/YSZ composites, by mechanical alloying. The metallic particles of the composites were uniformly covered with finer YSZ particles. Sub-micron sized pores are were homogeneously dispersed in the Ni/YSZ and Cu/YSZ composites. In this study, The cathode materials were synthesized and their Characterizations properties were evaluated in this study: It was found that the better electric conductivity of the Cu/YSZ composite was measured improved compared tothan that of the Ni/YSZ composite. Slight A slight increase in the resistance can be produced for in a Cu/YSZ cathode by oxidation, but it this is compensated offset for by a favorable thermal expansion coefficient. Therefore, Cu/YSZ cermet can be adequately used as a suitable cathode material of in high high-temperature electrolysis.

전기분해 생성물을 예상하는 과정을 통해 화학교사들과 예비 교사들이 가지는 개념의 문제점에 대한 분석 (The Problems of Chemistry Teachers' and Pre-service Teachers' Conceptions in the Prediction of Electrolysis Products)

  • 박진희;백성혜
    • 대한화학회지
    • /
    • 제48권5호
    • /
    • pp.519-526
    • /
    • 2004
  • 이 연구에서는 사범대학 화학교육과를 재학하고 있는 예비 교사들, 그리고 현직에서 화학을 가르치는 교사들을 대상으로 NaI 수용액의 전기분해 생성물을 예상하도록 하여 전기분해과정에 대한 이해를 알아보았다. 연구는 설문과 면담을 통해 이루어졌다. 이를 통해 이들이 가지는 개념들을 비교하였다. 또한 이에 관련된 교과서 및 대학교 일반화학 교재의 내용을 분석하여, 교사들의 생각과 교재와의 관련성을 알아보고자 하였다. 연구 결과, 전기분해 생성물을 예상함에 있어서 대다수의 예비 교사들은 표준전극전위를 적절하게 활용하지 못하였다. 반면 교사들은 표준전극전위를 활용하여 생성물을 예상하는 비율이 높았으나, 전기분해할 때 물이 산화환원 반응에 참여한다는 점을 이해하는 교사의 비율은 높지 않은 것으로 나타났다. 그리고 고등학교 교과서의 서술에서도 일부 오류가 확인되었다.

알칼리 수전해용 전극에 관한 연구 (Study on the Electrode Characteristics for the Alkaline Water Electrolysis)

  • 최호상;임두순;유철휘;김재철;황갑진
    • 한국수소및신에너지학회논문집
    • /
    • 제23권2호
    • /
    • pp.117-124
    • /
    • 2012
  • Alkaline electrolysis needs the electrode having a low overvoltage and good corrosion resistance in alkaline solution such as KOH and NaOH, for the oxygen and hydrogen production. The commercial materials such as SUS(stainless steel)-316, Ni and NiFe were evaluated for the electrode in alkaline electrolysis. The test solution for the alkaline electrolysis used 1~9M NaOH and 1~9M KOH. The voltage increased with an increase of current density in each solution. As for the 15wt.% (about 5M) NaOH, the voltage of the tested electrode under the current density of 1.8A/$cm^2$ showed the almost same value. The voltage over the current density of 1.8A/$cm^2$ deceased in the order: Ni${\fallingdotseq}$NiFe$cm^2$ showed the almost same value. The voltage over the current density of 1.8A/$cm^2$ deceased in the order: NiFe${\fallingdotseq}$SUS-316. From the results, it was estimated that NiFe and Ni was suitable as the electrode for the alkaline water electrolysis using NaOH and KOH electrolyte.

전기분해를 이용한 하수슬러지 가용화 연구 (The Study on the Solubilization of Sewage Sludge by Electrolysis Treatment)

  • 김재형;전혜연;이준철;박대원
    • 에너지공학
    • /
    • 제21권2호
    • /
    • pp.194-201
    • /
    • 2012
  • 본 연구에서는 소화가스 효율 향상을 위한 전처리로 전기분해를 이용한 하수슬러지 가용화 연구를 수행하였다. 전기분해 처리시간과 전류밀도가 증가함에 따라 SCOD 농도가 증가하였고, 처리시간 60분에 SCOD, TN, TP가 각각 7.4배, 1.9배, 1.3배로 가장 높은 증가율을 보였다. 하수슬러지 초기 pH별 전기분해 처리효과는 강산성, 강알칼리성에서 가용화율이 높았고, 특히 pH 12에서 32.9%의 높은 가용화율을 보였다. 이상의 결과는 전기분해에 의한 직 간접산화작용으로 인해 슬러지의 플록, EPS 구조가 파괴되어 미생물이 이용가능한 유기물들이 증가되었음을 의미한다.

음이온 교환막 알칼리 수전해를 위한 운전 조건 및 구성요소의 최적화 (Optimization of Operating Parameters and Components for Water Electrolysis Using Anion Exchange Membrane)

  • 장명제;원미소;이규환;최승목
    • 한국표면공학회지
    • /
    • 제49권2호
    • /
    • pp.159-165
    • /
    • 2016
  • The hydrogen has been recognized as a clean, nonpolluting and unlimited energy source that can solve fossil fuel depletion and environmental pollution problems at the same time. Water electrolysis has been the most attractive technology in a way to produce hydrogen because it does not emit any pollutants compared to other method such as natural gas steam reforming and coal gasification etc. In order to improve efficiency and durability of the water electrolysis, comprehensive studies for highly active and stable electrocatalysts have been performed. The platinum group metal (PGM; Pt, Ru, Pd, Rh, etc.) electrocatalysts indicated a higher activity and stability compared with other transition metals in harsh condition such as acid solution. It is necessary to develop inexpensive non-noble metal catalysts such as transition metal oxides because the PGM catalysts is expensive materials with insufficient it's reserves. The optimization of operating parameter and the components is also important factor to develop an efficient water electrolysis cell. In this study, we optimized the operating parameter and components such as the type of AEM and density of gas diffusion layer (GDL) and the temperature/concentration of the electrolyte solution for the anion exchange membrane water electrolysis cell (AEMWEC) with the transition metal oxide alloy anode and cathode electrocatalysts. The maximum current density was $345.8mA/cm^2$ with parameter and component optimization.

수전해용 이오노머 분자동역학 모델 개발 (Development of Molecular Dynamics Model for Water Electrolysis Ionomer)

  • 강호성;박치훈;이창현
    • 멤브레인
    • /
    • 제30권6호
    • /
    • pp.433-442
    • /
    • 2020
  • 본 연구에서는 수전해용 ionomer의 분자동역학 전산모사 모델 제작을 위하여, 과량의 물 분자가 존재하는 수전해 시스템의 특성을 반영한 ionomer 모델을 제작한 후, 기존 연료전지용 전해질막 전산모사 조건에 맞춰 제작한 ionomer 모델과 비교하였다. 최종적으로 얻어진 모델은 과불소계 ionomer의 중요 특징 중 하나인 명확한 상분리 및 수화채널이 관찰되었으며, 과량의 물 및 높은 운전 온도 조건에서도 물에 녹지 않고 안정된 구조를 나타내었다. 제조된 ionomer 모델에서는 과량의 물분자로 인한 이온 희석 효과로 이온 전달 성능 감소가 나타났으며, 반대로 수소 기체의 투과는 더 증가할 것으로 분석되었다. 따라서 이러한 수전해 시스템의 특성을 반영한 수전해용 ionomer 분자 구조 설계 전략이 필요하고, 분자동역학 전산모사 연구 시에도 이를 감안한 수전해용 ionomer 모델 제작이 필요하다.

음이온교환막 수전해 촉매기술 동향 (Research Trend in Electrocatalysts for Anion Exchange Membrane Water Electrolysis)

  • 김지영;이기영
    • 전기화학회지
    • /
    • 제25권2호
    • /
    • pp.69-80
    • /
    • 2022
  • 고순도 수소생산을 위한 음이온 교환막 수전해는 양성자 교환막 수전해 시스템에서 사용되는 기존 귀금속 촉매 대신 저렴한 비귀금속 기반 촉매를 사용하여 차세대 녹색 수소 생산 기술로 많은 관심을 받고 있다. 하지만 음이온 교환막 수전해 기술은 개발 초기 단계이기 때문에 음이온 교환막 수전해의 핵심 요소인 음이온 교환막, 이오노머, 전극지지체 및 촉매에 관한 연구 수행이 필요하다. 그 중, 현재 촉매 분야에서 진행되고 있는 연구들은 기개발된 알칼리용 반쪽전지 촉매를 음이온 교환막 시스템에 적용하는 방향의 연구가 진행되고 있으며 적용된 촉매는 낮은 활성도와 내구성의 문제점을 가진다. 이에 본 총설은 알칼리성 매질에서 비귀금속 기반 촉매를 사용하여 산소발생반응 및 수소발생반응을 촉진시킨 촉매 합성 기술을 제시하였다.

수소이온 교환막 기반 수전해의 최근 연구 동향 (Recent Progress on Proton Exchange Membrane Based Water Electrolysis)

  • 양승민;라즈쿠마 파텔
    • 멤브레인
    • /
    • 제32권5호
    • /
    • pp.275-282
    • /
    • 2022
  • 현대에는 배터리를 비롯한 수소 기반 에너지가 효율적이라고 널리 알려져 있다.이러한 결과는 수소가 에너지 수송체로써의 높은 효율을 가지고 있다는 사실로부터 기반한다. 자연 친화적이며 높은 순도를 가진 수소는 수전해로부터 제조할 수 있다. 다양한 종류의 전기분해 중, 수소이온 교환막 수전해는 가장 재생 가능하며 싸고 자연 친화적이다. 이는 에너지로써 사용이 되기에 적합한 산소와 수소를 생성한다. 이와 같이 많은 장점이 있기에 활발한 연구가 수소이온 교환막 전기분해에 대해 진행되고 있다. 나피온은 수소이온 교환막으로 널리 쓰이지만, 비싼 비용과 다양한 다른 단점으로 인해 여러 가지 종류의 대체재가 개발되고 있다. 본 총설에서는 크게 나피온과 비나피온(non-Nafion) 기반 수소이온 교환막 수전해로 나누어 다루었다.

PEM 수전해에서 막과 전극의 내구성에 미치는 구동 온도의 영향 (Effect of Operation Temperature on the Durability of Membrane and Electrodes in PEM Water Electrolysis)

  • 유동근;김성민;황병찬;오소형;박권필
    • Korean Chemical Engineering Research
    • /
    • 제61권1호
    • /
    • pp.19-25
    • /
    • 2023
  • PEM (Proton Exchange Membrane) 수전해의 성능향상에 대해 많은 연구개발이 진행되었으나, 내구성에 대한 연구는 아직 초기 단계라고 할 수 있다. 본 연구는 성능향상을 위해 PEM 수전해 구동 온도를 상승시켰을 때, 수전해 내구성에 미치는 영향에 대해 연구하였다. 50~80 ℃ 온도 범위에서 일정 전류 조건으로 구동하면서 전압변화, I-V, CV (Cyclic Voltammetry), LSV (Linear Sweep Voltammetry), Impedance, FER (Fluoride Emission Rate) 등을 측정했다. 운전온도가 상승할수록 열화속도가 증가했다. 50~65 ℃에서는 IrO2 전극 촉매 열화가 PEM 수전해 셀의 내구성에 주로 영향을 주었다. 80 ℃에서는 고분자 막과 전극 열화가 비슷하게 진행되어 short 저항이 1.0 kΩ·cm2 이하로 감소하면서 shorting 현상에 의해 구동한지 144시간 만에 성능이 초기의 약 1/3로 감소하였다.

PEM 수전해에서 정지횟수가 성능 감소에 미치는 영향 (Effect of Number of Shutdown on the Decrease of Performance in PEM Water Electrolysis)

  • 추천호;양종원;나일채;박윤진
    • Korean Chemical Engineering Research
    • /
    • 제61권2호
    • /
    • pp.202-207
    • /
    • 2023
  • 태양광과 풍력발전의 잉여전기를 공급받아 수전해를 구동하는 경우 날씨 변동에 따라 구동과 정지를 반복해야한다. 수전해를 구동하다 정지하면 잔류 수소와 산소에 의해 PEM 연료전지와 같은 상태가 되고, 구동 중 형성된 수전해의 높은 전위 때문에 전극과 고분자막이 정지 중에도 열화될 가능성이 높다. 본 연구에서는 PEM 수전해가 구동/정지 반복과정에서 전극과 고분자막의 열화가 얼마나 진행되는지 확인하고자, 144시간 동안에 구동/정지 횟수를 변화시키며 성능 감소를 측정하였다. 전극 촉매 활성면적 변화와 고분자막의 수소투과도와 불소유출속도 등을 분석해 전극과 고분자막의 특성 변화를 측정했다. 전체적으로 정지 횟수가 증가할수록 PEM 수전해 성능이 감소했다. 144시간동안에 5회 정지했을 때 IrOx 촉매 활성이 30% 이상 감소하였고, 수소투과도는 80% 증가해서 전극과 고분자막이 모두 열화됨을 확인했다.