• 대한화학회지
• /
• 제54권1호
• /
• pp.13-22
• /
• 2010

7 diethylaminocoumarin (DEAC) 레이저 염료의 광물리적 특성들을 다양한 용매에서 측정하였다. DEAC의 방출 스펙트럼은 양이온성(CTAC) 미셀과 음이온성(SDS) 미셀에서 측정하였고, 레이저 파라미터는 아세톤, 다이옥산, 에탄올 및 dimethylforamide (DMF)과 같은 여러 가지 용매에 대하여 계산하였다. DEAC의 광반응성은 366 nm 빛을 사용하여 $CCl_4$ 용매에서 연구하였고, 광화학 수득률 (${\Phi}_c$)과 속도 상수(k)도 결정하였다. picric acid (PA), tetracyanoethylene (TCNE), 7,7,8,8-tetracynoquinonedimethane (TCNQ)등의 유기 수용체와 DEAC의 상호 작용에 대한 연구는 acetonitrile ($CH_3CN$) 용액에서 형광을 측정하므로 써 수행하였다. DEAC의 전기화학적 연구는 백금 전극을 사용하여 0.1 mol/L tetrabutyl ammonium perchlorate (TBAP)/$CH_3CN$ 용액에서 순환 전류-전압법, convolutive voltammetry 및 디지털 시뮬레이션을 조합하여 수행하였고, 전기화학 파라미터도 결정하였다.

• The Korean Journal of Ceramics
• /
• 제4권2호
• /
• pp.61-67
• /
• 1998

The significance of point defects as relevant centers concerning electrochemical function is highlighted. Starting from the most simple case of dilute equilibrium bulk defect chemistry, influence of defect interaction and in particular the impact of interfaces on point defect redistribution are considered. Then recent progress in the field of kinetics in bulk and at boundaries is discussed. Finally, selected applications with emphasis on battery and sensor technology are presented.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제37회 하계학술대회 초록집
• /
• pp.358-358
• /
• 2009

• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2722-2726
• /
• 2011

Plasticized poly(vinyl chloride), PVCs, with different membrane compositions tested for use in the construction of an ion-selective sensor for the determination dibucaine. A prepared membrane with dioctyl phthalate-PVC and ion-pair of N-(1-naphthyl)ethylenediamine dihydrochloride-tetraphenyl borate had a good potential to acts as a potentiometric sensor for the analysis of dibucaine. A linear relationship was obtained between potential and logC varying between $1.0{\times}10^{-6}$ and $1.0{\times}10^{-2}$ M dibucaine with a good repeatability and reproducibility. The sensor was applied for the determination of the drug in pharmaceuticals and biological fluids such as plasma and urine samples with satisfactory results. The drug electrode has also been used to study the interaction of bovine serum albumin (BSA) with dibucaine. The saturated quantities of dibucaine binding were 13.04, 5.30 and 9.70 mol/mol in 0.01, 0.02 and 0.1% of protein, respectively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.408-409
• /
• 2008

This paper presents a new development for topology optimization of heat-dissipating structure with forced convection. To cool down electric devices or machines, two types of convection models have been widely used: Natural convection model with a large Archimedes number and Forced convection with a small Archimedes number. Nowadays, many engineering application areas such as electrochemical conversion device or fuel cell devices adopt the forced convection to transfer generated heat. Therefore, to our knowledge, it becomes an important issue to design flow channels inside which generated heat transfer. Thus, this paper studies optimal topological designs considering fluid-heat interaction. To consider the effect of the advection in the heat transfer problem, the incompressible Navier-stokes equation is solved. This paper numerically studies the coupling phenomena and presents optimal channel design considering forced convection.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1909-1911
• /
• 2003

This research describes a new constructing method of multifunctional biosensor using many kinds of biomaterials. A metal particle and an array was fabricated by photolithographic. Biomaterials were immobilized on the metal particle. The array and the particles were mixed in a buffer solution, and were arranged by magnetic force interaction and self-assembly. A quarter of total Ni dots were covered by the particles. The binding direction of the particles was controllable, and condition of particles was almost with Au surface on top. The particles were successfully arranged on the array. The biomaterial activities were detected by chemiluminescence and electrochemical methods.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.426-427
• /
• 2005

This research describes a new constructing method of multifunctional biosensor using many kinds of biomaterials. A metal particle and an array was fabricated by photolithographic. Biomaterials were immobilized on the metal particle. The array and the particles were mixed in a buffer solution, and were arranged by magnetic force interaction and self-assembly. A quarter of total Ni dots were covered by the particles. The binding direction of the particles was controllable, and condition of particles was almost with Au surface on top. The particles were successfully arranged on the array. The biomaterial activities were detected by chemiluminescence and electrochemical methods.

• 전기화학회지
• /
• 제6권4호
• /
• pp.255-260
• /
• 2003

다공성 탄소전극의 전위에 짜른 EDLC(e)ectric double-layer capacitor)특성을 조사하기 위해 복소캐패시턴스분석(complex capacitance analysis)을 수행하였다. 하나의 원통형 기공에 대해 복소캐패시턴스를 이론적으로 유도하였고, 기공의 분포를 고려하여 다공성 전극에 대하여서도 계산하였다. 복소캐패시턴스의 허수부를 주파수에 대해 도시하면 피크 형태의 곡선이 얻어지는데, 이때 피크의 면적은 캐패시턴스 값의 크기와, 피크의 위치는 다공성전극의 전기화학 파라매터와 기공구조에 의해 결정되는 $\alpha_0$와 상관관계가 있음을 알 수 있었다. 이를 이용하면, 동일한 기공구조를 갖는 전극에 대해, 전위에 따른 캐패시턴스와 기공 내 이온전도도의 변화를 측정할 수 있다. 메조포러스 탄소전극에 대하여 전위를 변화시키며 electrochemical impedance spectroscopy를 측정하고 이를 복소캐패시턴스법에 의해 분석하였다. 피크 면적으로부터 구한 전위에 따른 캐패시턴스는 0.3V부근에서 최대값을 가졌는데, 이는 cyclic voltammetry 실험결과와도 일치하였다. 한편, 피크 위치로부터 구한 기공 내 이온전도도는 0.2V에서 최대 값을 가지고 전위가 증가할 수록 서서히 감소하였다. 이를 탄소 표면전하의 증가로 인해 이온/표면의 전기적 작용력이 커졌기 때문으로 해석하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제15권5호
• /
• pp.257-261
• /
• 2014

Multilayered CdTe/PSS films were prepared by the electrostatic self-assembly method in an aqueous medium. Positively-charged cadmium telluride (CdTe) nanoparticles and anionic polyelectrolyte, poly (sodium 4-styrene sulfonate) (PSS) were assembled alternately in order to build up a multilayered film structure. A linear proportion of absorbance to the number of bilayers suggests that an equal amount of CdTe was adsorbed after each dipping cycle, which resulted in the buildup of a homogenous film. The binding energies of elements (Cd and Te) in multilayered CdTe/PSS film shifted from those of the CdTe nanoparticles in the pure state. This result indicates that the interfacial electron densities were redistributed by the strong electrostatic interaction between the oppositely-charged CdTe and PSS. Electrochemical properties of the multilayered CdTe/PSS films were studied in detail by cyclic voltammetry (CV).

• 전기화학회지
• /
• 제14권2호
• /
• pp.83-91
• /
• 2011

Mesoporous titanium dioxide ($TiO_2$) thin films were prepared using poly(vinyl chloride)-graft-poly(N-vinyl pyrrolidone) (PVC-g-PVP) as a templating agent via sol-gel process. Grafting of PVC chains from PVC backbone was done by atom transfer radical polymerization (ATRP) technique. The successful grafting of PVP to synthesize PVC-g-PVP was checked by fourier-transform infrared spectroscopy (FT-IR) and gel permeation chromatography (GPC). The carbonyl group interaction of PVC-g-PVP graft copolymer with $TiO_2$ was confirmed by FT-IR. The porous morphologies of the $TiO_2$ films genereated after calcination at $450^{\circ}C$ was characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The mesoporous $TiO_2$ films with 580 nm in thickness were used as a photoelectrode for solid state dye sensitized solar cell (DSSC) and showed an energy conversion efficiency of 1.05% at 100 $mW/cm^2$.