• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.440-440
• /
• 2009

Semiconductor nanowires offer exciting possibilities as components of solar cells and have already found applications as active elements in organic, dye-sensitized, quantum-dot sensitized, liquid-junction, and inorganic solid-state devices. Among many semiconductors, silicon is by far the dominant material used for worldwide photovoltaic energy conversion and solar cell manufacture. For silicon wire to be used for solar device, well aligned wire arrays need to be fabricated vertically or horizontally. Macroscopic silicon wire arrays suitable for photovoltaic applications have been commonly grown by the vapor-liquid-solid (VLS) process using metal catalysts such as Au, Ni, Pt, Cu. In the case, the impurity issues inside wire originated from metal catalyst are inevitable, leading to lowering the efficiency of solar cell. To escape from the problem, the wires of purity of wafer are the best for high efficiency of photovoltaic device. The fabrication of wire arrays by the electrochemical etching of silicon wafer with photolithography can solve the contamination of metal catalyst. In this presentation, we introduce silicon wire arrays by electrochemical etching method and then fabrication methods of radial p-n junction wire array solar cell and the various merits compared with conventional silicon solar cells.

• 조명전기설비학회논문지
• /
• 제14권6호
• /
• pp.43-50
• /
• 2000

본 논문에서는 국내의 고압 가공배전선으로 일반적으로 사용되는 ACSR-OC의 열회를 검출하기 위하여, 솔레 노아드 와류센서를 가진 비파괴 검사시스템의 설계와 실험을 다루었다. ACSR-OC 도체에 대한 부식기구와 열회 상태를 검토하므로써, 부식이 도채의 유효단면적을 감소시키는 것을 확인하였다. 노화도체의 극심한 부적정도룹 검출하고 정량화하기 위한 실용적인 전기.자기적인 방법올 제시하였다. 고주파 정전류원, 신호처리 부와 모터 구동/제어기로 구생되눈 계측시스템이 설계되고 시험되었다. 이 장치는 센서의 출력을 검출하고 검사도체의 직경변화를 연속적으로 추정하는 기능을 갖고 있다. 그 결과, 와류센서를 가진 부각검출시스템은 가공 재전선의 열화에 기인한 심각한 결함을 추정하고 극심한 노호도체가 단선되기 전에 사전 경고를 하는데 양호한 효용성을 나타내는 것을 확인하였다.

• 조명전기설비학회논문지
• /
• 제21권10호
• /
• pp.108-117
• /
• 2007

고전력수용가포털(Consumer Portal)은 소비자의 다양한 장치들과 광역 네트워크, 그리고 에너지서비스사업자(ESP: 한전 등)의 서비스 애플리케이션 플랫폼을 연결하는 물리적 링크이자 논리적 결합으로, 전력서비스 체계에서 소비자-공급자 간 정보교환과 서비스 거래를 담당하는 양방향 통신의 핵심 인프라로서 포털이다. 전력수용가포털(Consumer Portal)의 성공적인 설계와 개발을 위해서는 효율성, 경제성, 확장성을 고려한 서비스 중심적 표준화 전략이 중요하게 고려되어야 한다. 본 논문에서는 전력수용가포털 설계에 필요한 XML기반의 표준화 안을 psXML(Power System XML)로 제안하고 이를 설계, 구현하여 실제 구축 중인 시스템에 적용하였다. 이는 네트워크 및 프로세서 부담을 최소화할 수 있는 수용가포털을 위한 개방형 표준을 구현한 것이다.

• 조명전기설비학회논문지
• /
• 제20권2호
• /
• pp.50-59
• /
• 2006

제안된 소방설비는 기존 P형과 R형 시스템에 비해 결선량이 P형 대비 74[%]로 획기적으로 줄고, 비 숙련자도 결선이 쉬워 공기와 인건비를 줄일 수 있고, 수신기나 중계기 등의 부가적인 장치가 없어도 안정적으로 동작될 수 있음을 실험을 통해 확인하였다. 소방효과는 R형과 동일하나 물의 사용 양이나 화재 추적 등에 탁월한 기능이 있으며, 사람의 개입 없이 대피유도나 화재진압 정도를 스스로 조절함으로써 얻을 수 있는 무형적 이익과 공사비 절감 및 공기단축 등 유형적 이익을 통해 제안된 시스템이 아주 효과적임을 판단할 수 있었다. 특히 화재진행 상황에 따라 대응정도를 다르게 수행하므로 현재와 같은 유비쿼터스 환경에서 인간의 개입을 최소화하며, 효율을 극대화함으로써 차세대 소방 시스템으로서의 기능을 충분히 갖춘 시스템으로 발전이 가능하다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권8호
• /
• pp.387-393
• /
• 2001

This paper describes an advanced measuring method and precise evaluation of the ground resistance for the grounding system of energized substations and power equipments. A grounding system of substations consists of all interconnected grounding connections of grounded conductors, neutral ground wires, underground conductors of distribution lines, cable shields, grounding terminals of equipments, and etc. It is very difficult to measure the accurate ground resistance of the grounding terminals of equipments, and etc. It is very difficult to measure the accurate ground resistance of the grounding system of high voltage energized substations because of harmonic components caused by switched power supplies or overloads. The conventional fall-of-potential method may be subject to big error if stray ground currents and potentials are present. In this work, to improve the precision in measurements of the ground resistance by eliminating the effects of harmonic components and stray currents and potentials, the investigations of the ground resistance measurement by using a low pass filter in a model energized grounding system were conducted. The accuracy of ground resistance mesurements was evaluated as a function of the ratio of the test signal to noise (S/N). The errors due to the proposed ground resistance measurement method were decreased with increasing S/N and were less than 5[%] as S/N is 10. The proposed ground resistance measurement method appears to be considerably more accurate than the conventional fall-of -potential method. It is allows cancellation of the parasitic resistance of energized grounding systems, to employ the measurement method that allows cancellation of the parasitic effects due to other circulating ground currents and ground potential rises in practical situations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.585-588
• /
• 2003

Bi-2223 superconducting wires were fabricated by stacking, drawing process with different precursor powders and different heat-treatment histories. The precursor powders were 2 kinds of Pb content. And a part of the tapes were experienced pre-annealing process which caused tetragonal structure of Bi-2212 phase to orthorhombic structure of it was during drawing process. We confirmed the transformation of Bi-2212 phase from tetragonal structure to orthorhombic structure and reduction of second phases. AC magnetization analysis were performed in order to investigate the fraction of Bi-2223 phase in Bi-2223/Ag HTS tape. The cross sections of 55 filaments and 61 filaments were investigated after rolled in order to understand deformation mechanism of superconducting cores. We could achieve best Ic of 70 A class at the Bi-2223/Ag tape using low Pb content of precursor powder and experienced pre-annealing process. AC magnetization analysis was useful to investigate the fraction of Bi-2223 phase in the Bi-2223/Ag tape.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.593-596
• /
• 2003

A proposed way to prepare $YBa_2Cu_3O_y$ wires or tapes is that Ag is used as substrate and melting point of $YBa_2Cu_3O_y$ is decreased to lower than the melting point of silver ($961\;^{\circ}C$). Therefore after the deposition of $YBa_2Cu_3O_y$ film on Ag substrate, the heat treatment can be carried out below the Ag melting point. Silver (Ag) and Lead oxide(PbO) were selected to be additives for $YBa_2Cu_3O_y$. Different Ag and PbO contents were added in $YBa_2Cu_3O_y$, the melting points of which were measured by DTA. In order to guarantee that the superconductivity of $YBa_2Cu_3O_y$ was not reduced after Ag and PbO added into $YBa_2Cu_3O_y$, their superconductivities were measured. It is proved that as additives, both Ag and PbO can reduce the melting point of $YBa_2Cu_3O_y$. For Ag doped $YBa_2Cu_3O_y$, $T_c$ is about 93K and ${\Delta}Tc$ is $2{\sim}3K$. For PbO doped $YBa_2Cu_3O_y$, $T_c$ is $88K{\sim}92K$ and ${\Delta}T_c$ is $11{\sim}12K$. When 10 wt% of Ag and 10 wt% PbO were added in $YBa_2Cu_3O_y$, the melting point of the mixture of $YBa_2Cu_3O_y$ (80 wt%), Ag (10 wt%) and PbO (l0 wt%) is $943^{\circ}C$. The transition temperatures ($T_c$) of the sample is 91.8 K.

• 대한한의학회지
• /
• 제20권1호
• /
• pp.106-112
• /
• 1999

The purpose of this study is to investigate the effects of Bee Venom Herb-Acupuncture on the jaw opening reflex evoked by tooth pulp stimulation. Rats were anesthetized with thiopental sodium given intraperitoneally in an initial dose of 80mg/kg. Maintenance doses of 5mg/kg thiopental sodium were given through a cannular in the femoral vein as required to maintain light anesthesia. To apply noxious stimuli, a pair of enameled wires were inserted into the tooth pulp of the lower incisor. The effects of conditioning stimuli were estimated as an indicator of the degree of suppression of the digastric muscle electromyogram(dEMG) in the jaw opening reflex. Bee Venom Herb- Acupuncture(0.2% solution 0.1ml/rat) was injected to Hapgok(LI4) loci. In addition, Normal Saline (0.1ml/rat) was injected to Hapgok loci so as to compare the degree of suppression elicited from Bee-Venom. By administration of Bee Venom Herb-Acupuncture, the amplitude of dEMG was maximally suppressed to $67.5{\pm}3.38%$ ipsilaterally, 73.33{\pm}8.00%$ contralaterally. Generally, the dEMG activities caused by electrical stimulation were gradually suppressed during the stimulation and maximal suppressive effect showed at 15min after its onset. However the dEMG activities by Be Venom Herb-Acupuncture were immediately suppressed after its onset and the suppressive effect continued for a long time compared to electrical stimulation. In conclusion, Bee Venom Herb-Acupuncture may have a different mechanism of analgesia from that of electro-acupuncture and contribute to the modulation of pain analgesia.

• 조명전기설비학회논문지
• /
• 제17권3호
• /
• pp.11-17
• /
• 2003

본 논문에서는 충돌검지 다중 접속 프로토콜을 적용하여 기존의 3선식 RS232C직렬 통신 포트를 2선식 공통 통신채널에 접속하여 다중접속을 가능하게 하는 인터페이스의 구현을 다루었다. 기존의 3선식 RS232C직렬 통신포트의 하드웨어의 변경 없이 송신데이터와 수신데이터를 공통데이터 선으로 결합하는 인터페이스회로에 의하여 2선으로 구성하였다. 2선식 연결방법에 의하여 다수의 호스트가 공통선로에 연결되는 경우2개 이상의 호스트가동시에 데이터를 전송할 경우 데이터의 충돌이 발생한다. 이를 감지하기 위하여 전송 데이터를 궤환하여 비교하고 전송데이터의 왜곡 여부로 데이터 충돌을 검지한다. 데이터의 재전송시 충돌 확률을 낮추기 위하여 여러 가지 재전송 모델링을 제시하였으며 각 방법에 대한 실험결과를 통하여 성능을 비교하였다. 본 연구의 결과는 기존의 RS232C 기기의 회로를 거의 변경하지 많고 다중접속이 가능하게 함으로 기존의 각종기기 및 설비를 단일 통신선로에 의한 네트워크에 연결하는 데 응용될 수 있다.

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2209-2213
• /
• 2009

$REBa_{2}Cu_{3}O_{7-d}$(REBCO) coated conductors(REBCO CCs) have been studied for electric power applications which require high current density wires. As long as the critical transition temperature(Tc) is concerned, REBCO CCs with large $RE^{3+}$ ions have been expected to have better current transport properties than those with smaller $RE^{3+}$ ions. For this reason, REBCO's with large $RE^{3+}$ ions which include GdBCO, NdBCO and SmBCO have been mainly considered as the superconducting layer of CCs. On the other hand, REBCO's with smaller $RE^{3+}$ions are expected to have advantages in the fabrication process of CCs because of the lower melting temperature. But it has not yet been made clear which REBCO is the most suitable for the superconducting layer of CCs. In this study, we investigated the current transport properties of REBCO CCs with small $RE^{3+}$ ion and advantages of using that in the CC fabrication process. Thin films of TmBCO, which has smaller $RE^{3+}$ion than most other $RE^{3+}$ ions, were fabricated on buffered metal substrate as the superconducting layer of CC by PLD process. TmBCO CC shows critical current density (Jc (77 K, sf) = $2.3\;MA/cm^2$) high enough to be utilized for application in electric power devices. Compared with previous experiments using the same PLD system, deposition temperature was approximately $20^{\circ}C$ lower than NdBCO thin films on buffered metal substrates.