• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.9
• /
• pp.873-877
• /
• 2013

The application of inkjet technology has been broadening from home printers to manufacturing tools. Recently, there have been demands for high-resolution printing, especially in the field of printed electronics applications. To improve upon the conventional inkjet printing patterning method, electrohydrodynamic (EHD) inkjet technology has recently attracted attention because droplets smaller than the nozzle diameter can be ejected and materials with wider viscosity range can be used for jetting. In this study, an EHD jet printing system for fine patterning is presented. To print various patterns based on drop on demand printing, vector and raster printing algorithm are implanted in the printing software. Fine conductive patterns with line width of less than $7{\mu}m$ can be easily achieved via EHD jet using a nozzle with inner diameter of $8{\mu}m$.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.5
• /
• pp.687-690
• /
• 1999

Bacillus stearothermophilus No. 236 isolated from the soil is a strong xylan degrader producing all the xylanolytic enzymes. However, the strain was discovered to be highly intractable to its transformation. In the present study, we have developed a reliable method for transformation of B. stearothermophilus No. 236 by a systematic examination of several factors which might have an influence on the efficiency of electrotransformation. Notably, we found that the most critical factor influencing the transformation efficiency (TE) was the incubation temperature after pulsing, with its optimum incubation of $37^{\circ}C.\; At\; 50^{\circ}C$, the optimum growth temperature of the B. stearothermophilus strain, the transformants could not be obtained at a recognizable level. The combination of field strength of 7.5 kV/cm along with pulse duration of 10 msec (resistance of $400{\Omega}\; and\; capacitance\; of\; 25{\mu}F$) was shown to be the best electrical parameters at the incubation temperature of $37^{\circ}$. A higher TE was obtained when the cells were harvested at an early-exponential phase. Twenty percent of PEG-8000 in a suspension buffer and an addition of 0.1% glycine in the growth medium resulted in about 4-fold and 3-fold increases in TE, respectively. We also found that the plasmid DNA which had been cycled through the host B. stearothermophilus cells enhanced TE by one order of magnitude higher. Under the presently described conditions, $2.5{\times}10^{5} transformants per ${\mu}g$ DNA was attained.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.6
• /
• pp.825-831
• /
• 2014

The aim of this study was to determine the nutritive value of some legume species in salt-affected soils of South-East Anatolian region using chemical composition and in vitro gas production kinetics. In this study, Lotus corniculatus, Trifolium alexandrinum, Medicago sativa were sown and tested in four different locations. A 3 by 4 factorial design with 3 legume species and 4 salt levels (non salty electrical conductivity (EC)<4 dS/m; low salt: 4 dS/m>EC<8 dS/m, medium saline: 8 dS/m>EC<16 dS/m and high salt: 16 dS/m>EC) was used in the study. Results indicated that salinity and plants had no significant effect on ash and ether extract. Dry matter (DM), acid detergent fiber, digestible dry matter, dry matter intake (DMI) were affected by plant, salinity and plant${\times}$salinity interaction. On the other hand neutral detergent fiber, relative feed value (RFV), and DMI were affected by salinity and plant${\times}$salinity interaction. Mineral contents were affected by plant species, salinity and salinity${\times}$plants interactions. In vitro gas production, their kinetics and estimated parameters such as were not affected by salinity whereas the gas production up to 48 h, organic matter digestibility, metabolizable energy (ME), and net energy lactation ($NE_L$) were affected by plant and plant${\times}$salt interaction. Generally RFVs of all species ranged from 120 to 210 and were quite satisfactory in salty conditions. Current results show that the feed value of Medicago sativa is higher compared to Lotus corniculatus and Trifolium alexandrinum.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.161-161
• /
• 2010

n-type 반도체 특성을 띄는 $SnO_2$ 나노선은 가스 센서, 투명 소자, 태양광 전지 등으로 널리 사용되고 있다. 본 연구에서는 화학기상증착법으로 성장한 $SnO_2$ 나노선으로 폴리이미드 (PMDA-ODA: PI) 박막을 게이트 절연막으로 이용한 전계효과트랜지스터를 플렉서블 기판에 제작하고 전기적 특성을 분석하였다. 전자 전달 특성 곡선으로부터 n-형의 반도체 특성을 확인하였으며, 대부분의 산화금속 나노선에서와 같이 매우 큰 전기적 히스테리시스가 관찰되었다. 산화금속계통 나노선 소자의 히스테리시스는 나노선 표면에 산소 및 물 분자가 흡착되어 생기는 전자 갇힘 현상이 가장 큰 원인으로 알려져 있는데, 이러한 히스테리시스를 조절하거나 없애는 것은 소자의 특성 향상에 있어 매우 중요하다. 한편 PI 절연막에는 느린 분극 현상을 만드는 OH 반응기가 존재하기 때문에 나노선과는 반대 방향의 히스테리시스를 보일 것으로 예상된다. 본 연구에서는 제작된 $SnO_2$ 나노선 FET에서 PI 게이트 절연막의 경화 정도에 따른 히스테리시스를 조사하였다. FT-IR 측정에 따르면, PI 필름에 존재하는 OH 반응기는 PI를 경화시킴에 따라 감소하였으며 전기적인 히스테리시스도 감소하였다. 따라서, 절연막을 경화시키지 않았을 때는 PI 내부에 다량의 OH 반응기가 존재하여, PI의 히스테리시스가 나노선 히스테리시스보다 더 크게 작용하여, 전체적으로는 PI의 특성인 반시계 (counterclockwise) 방향의 히스테리시스를 나타내었다. 한편, 절연막을 완전히 경화시키면, OH 반응기는 대부분 사라지고 나노선의 히스테리시스만 발현되어 소자는 시계방향의 히스테리시스를 보였다. 이러한 실험결과를 통해, PI 박막을 $250^{\circ}C$ 에서 약 7분간 경화시켰을 때 나노선과 절연막의 히스테리시스가 가장 이상적으로 상쇄되어 전체적으로 히스테리시스가 매우 작아진 것을 관찰할 수 있었다. 이는 향후 나노선 FET의 안정적인 응용에 매우 유용한 결과로 활용될 것으로 예측된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.320-320
• /
• 2014

Amorphous silicon alloy (a-Si) solar cells and modules have been receiving a great deal of attention as a low-cost alternate energy source for large-scale terrestrial applications. Key to the achievement of high-efficiency solar cells using the multi-junction approach is the development of high quality, low band-gap materials which can capture the low-energy photons of the solar spectrum. Several cell designs have been reported in the past where grading or buffer layers have been incorporated at the junction interface to reduce carrier recombination near the junction. We have investigated profiling the composition of the a-SiGe alloy throughout the bulk of the intrinsic material so as to have a built-in electrical field in a substantial portion of the intrinsic material. As a result, the band gap mismatch between a-Si:H and $a-Si_{1-x}Ge_x:H$ creates a barrier for carrier transport. Previous reports have proposed a graded band gap structure in the absorber layer not only effectively increases the short wavelength absorption near the p/i interface, but also enhances the hole transport near the i-n interface. Here, we modulated the GeH4 flow rate to control the band gap to be graded from 1.75 eV (a-Si:H) to 1.55 eV ($a-Si_{1-x}Ge_x:H$). The band structure in the absorber layer thus became like a U-shape in which the lowest band gap was located in the middle of the i-layer. Incorporation of this structure in the middle and top cell of the triple-cell configuration is expected to increase the conversion efficiency further.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.370.1-370.1
• /
• 2014

Giant magnetoresistance (GMR), tunneling magnetoresistance (TMR), and magnetic random-access memory (MRAM) are currently active areas of research. Magnetite, Fe3O4, is predicted to possess as half-metallic nature, ~100% spin polarization (P), and has a high Curie temperature (TC~850 K). On the other hand, Spinel ferrite CoFe2O4 has been widely studies for various applications such as magnetorestrictive sensors, microwave devices, biomolecular drug delivery, and electronic devices, due to its large magnetocrystalline anisotropy, chemical stability, and unique nonlinear spin-wave properties. Here we have investigated the magneto-transport properties of epitaxial CoxFe3-xO4 thin films. The epitaxial CoxFe3-xO4 (x=0; 0.4; 0.6; 1) thin films were successfully grown on MgO (100) substrate by molecular beam epitaxy (MBE). The quality of the films during growth was monitored by reflection high electron energy diffraction (RHEED). From temperature dependent resistivity measurement, we observed that the Werwey transition (1st order metal-insulator transition) temperature increased with increasing x and the resistivity of film also increased with the increasing x up to $1.6{\Omega}-cm$ for x=1. The magnetoresistance (MR) was measured with magnetic field applied perpendicular to film. A negative transverse MR was disappeared with x=0.6 and 1. Anomalous Hall data will be discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.382.2-382.2
• /
• 2014

We explain a method to fabricate multi-layered transparent conductive films (TCF) using graphene oxide (GO), copper powder and polyurethane (PU) solution. The flexible graphene nanosheets (GNSs) serve as nanoscale connection between conductive copper nanoparticles (CuNps) and PU nanofibers, resulting in a highly flexible TCF. To fabricate conductive films with high transmittance, polyurethane (PU) nanofibers were used for a conductive network consisting of CuNps and GNSs (CuNps-GNSs). In this experiment, copper powder and graphene oxides were mixed in deionized water with the ultrasonication for 2 h. NaBH4 solution is used as a reduction agents of CuNps and GNSs (CuNps-GNSs) under a nitrogen atmosphere in the oil bath at 100% for 24 h to mixed. The purified and dispersed CuNp-GNS were obtained in deionized water, and diluted to a 10wt.% based on the contents of GNSs. Polyurethane (PU) nanofibers on a PET substrate were formed by electrospinning method. PET slides coated with the PU nanofibers were immersed into CuNp-GNS solution for several second, rinsed briefly in deionized water, and dried to obtain self-assembled CuNp-GNS/PU films. The morphology of the multi-layered films were characterized with a field emission scanning electron microscope (FE-SEM, Hitachi S-4700) and atomic force microscope (AFM, PSIA XE-100). The electrical property was analysed by the I-V measurement system and the optical property was measured by the UV/VIS spectroscopy.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.4 no.2
• /
• pp.33-37
• /
• 2012

Hankyong National University decided to introduce a track-based curriculum for a curriculum innovation as it switched a Polytechnic University system into a general University system. A TF(task force) team was formed to study a operation strategy of a track curriculum and the opinions of campus members and educationist were gathered. Such systematic preparation was performed for the introduction of the track. Based on those works, a track-based curriculum has been operating from 2012 spring semester. A track system defines that the curriculum in a department is divided into specific majors(or tracks) and the department/agency guarantees their expertise if the students complete the course of a specific major to increase the depth and expertise in the field of study or specific areas. Track means a set of customized courses that are demanded by the corporations, and the courses include basically specific education activities, levels of education, and educational contents required for job or position of the corporation. In this paper, any issues, that arose through the operations of the track-based curriculum at Department of Electrical, Electronic and Control Engineering in Hankyong National University, and their possible solution were presented.

• Journal of Practical Engineering Education
• /
• v.6 no.1
• /
• pp.51-55
• /
• 2014

A case study on engineering clinic operation based on industry needs is introduced. Engineering clinic is a course that students and professor solve bottleneck techniques provided from an industry. The industry presents the bottleneck techniques to the professor and the professor plans a course that the students learn how to solve them, and the students train field adaptability by solving them. From the course evaluation of the engineering clinic, the students give high scores to the awareness of the course objectives, the performance period, the smooth communication, the application and understanding of major, the problem solving skill, the cooperation ability, the opportunity of carrier choice, and the course recommendation. Two semesters give higher satisfaction to the students than one semester because two semesters are long enough to solve the bottleneck techniques provided from the industry. It gives good opportunity that the students get a job through completing the course.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.329-332
• /
• 2012

LEDs are using widely in a field of illumination, LCD LED backlight, mobile signals because they have several merits, such as low power consumption, long lifetime, high brightness, fast response, environment friendly. To achieve high performance LEDs, one needs to enhance output power, reduce operation voltage, and improve device reliability. In this paper, we have proposed that the optimum design and specialized process could improve the performance of LED chip. It was showed an output power of 7cd and input supplied voltage of 3.2V by the insertion technique of current blocking layer. In this paper, GaN-based LED chip which is built on the sapphire epi-wafer by selective MOCVD were designed and developed. After that, their performances were measured. It showed the output power of 7cd more than conventional GaN-based chip. It will be used the lighting source of a medical equipment and LCD LED TV with GaN-based LED chip.