• Journal of Wetlands Research
• /
• v.21 no.2
• /
• pp.181-190
• /
• 2019

Recently, Low impact development techniques, a form of nature-based solutions (NBS), were seen cost-efficient alternatives that can be utilized as alternatives for conventional stormwater management practices. This study evaluated the effectiveness of an infiltration trench (IT) and a small constructed wetland (SCW) in treating urban stormwater runoff. Long-term monitoring data were observed to assess the seasonal performance and cite the advantages and disadvantages of utilizing the facilities. Analyses revealed that the IT has reduced performance during the summer season due to higher runoff volumes that exceeded the facility's storage volume capacity and caused the facility to overflow. On the other hand, the pollutant removal efficiency of the SCW was impacted by the winter season as a result of dormant biological activities. Sediment data also indicated that fine and medium sand particles mostly constituted the trapped sediments in the pretreatment and media zones. Sediments in SCW exhibited a lower COD and TN load due to the phytoremediation and microbiological degradation capabilities of the system. This study presented brief comparison LID facilities equipped with pre-treatment zones. The identified factors that can potentially affect the performance of the systems were also beneficial in establishing metrics on the utilization of similar types of nature-based stormwater management practices.

• Economic and Environmental Geology
• /
• v.54 no.1
• /
• pp.69-76
• /
• 2021

This study is to identify the mineralogical properties of caprock samples from drilling cores of the Pohang basin, which is the research area for the demonstration-scale CO2 storage project in Korea. The interaction of water-rock-gas that can occur due to CO2 injection was identified using geochemical modeling. Results of mineralogical studies, together with petrographic data of caprock and data on the physicochemical parameters of pore water were used for geochemical modeling. Modelling was carried out using the The Geochemist's Workbench 14.0.1 geochemical simulator. Two steps of modeling enabled prediction of immediate changes in the caprocks impacted by the first stage of CO2 injection and the assessment of long-term effects of sequestration. Results of minerlaogical analysis showed that the caprock samples are mainly composed of quartz, K-feldspar, plagioclase and a small amount of pyrite, calcite, kaolinite and montmollonite. After the injection of carbon dioxide, the porosity of the caprock increased due to the dissolution of calcite, and dawsonite and chalcedony were precipitated as a result of the dissolution of albite and k-feldspar. In the second step after the injection was completed, the precipitation of dawsonite and chalcedony occurred as a result of dissolution of calcite and albite, and the pH was increased due to this reaction. Results of these studies are expected to be used as data to quantitatively evaluate the efficiency of mineral trapping capture in long-term storage of carbon dioxide.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.315-326
• /
• 2011

In recent years, domestic and international interests focus on climate change, and importance of forest as carbon sink have been also increased. Particularly REDD+ mechanism expanded from REDD (Reduced Emissions from Deforestation and Degradation) is expected to perform a new mechanism for reducing greenhouse gas in post 2012. To conduct this mechanism, countries which try to get a carbon credit have to certify effectiveness of their activities by MRV (Measuring, Reporting and Verification) system. This study analyzed the approaches for detecting land cover change and estimating carbon stock by remote sensing technology which is considered as the effective method to develop MRV system. The most appropriate remote sensing for detection of land cover change is optical medium resolution sensors and satellite SAR (Synthetic Aperture Radar) according to cost efficiency and uncertainty assessment. In case of estimating carbon stock, integration of low uncertainty techniques, airborne LiDAR (Light Detection and Ranging), SAR, and cost efficient techniques, optical medium resolution sensors and satellite SAR, could be more appropriate. However, due to absence of certificate authority, guideline, and standard of uncertainty, we should pay continuously our attention on international information flow and establish appropriate methods. Moreover, to apply monitoring system to developing countries, close collaboration and monitoring method reflected characteristics of each countries should be considered.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.32 no.1
• /
• pp.391-413
• /
• 2021

Policy study information is the essential source of information in every step of decision making process to plan, execute and assess the national operation policy. The policy study subject of a national policy research center from study design the performance assessment on its practical effect is managed via thorough process to secure its effectiveness and efficiency. However, the directly exposed information to the practical user or the public who are in need of actual policy study information is the resource published in a form of policy study report, the final result. NKIS operated by the National Research Council for Economics, Humanities and Social Sciences under the Office for Government Policy Coordination, Prime Minister's Secretariat is a public information offering service that conduct integrated management on study reports from cooperative study among institutes along with policy outcome from 27 national policy research centers. This study aims to introduce the current status of operation and information management of NKIS, apprehend the management characteristics of policy study information resources of national policy research center, and deduce remarks that need to be considered for API with external service for the derivation of standardized sharing data element.

• Journal of Mushroom
• /
• v.20 no.4
• /
• pp.199-207
• /
• 2022

The demand for novel strains has been rising in the domestic market to increase the production of sclerotia from Wolfiporia hoelen. To improve strain breeding efficiency, we investigated whether single-nucleotide polymorphisms (SNPs) in the RNA polymerase II subunit (RPB2) gene, which may be linked to the mating type locus, are useful for distinguishing monokaryons from dikaryons in Korean W. hoelen strains. We designed a specific primer set to efficiently amplify a region of RPB2 using PCR with the genomic DNA of 12 cultivated strains and 31 wild strains of W. hoelen collected from Korea. Nucleotide sequences of the PCR-amplified RPB2 genes were determined and analyzed for the presence of SNPs among the 43 W. hoelen strains. Previously reported SNP loci were detected in the RPB2 gene of all W. hoelen strains tested. However, these previously reported SNP loci could not be applied to differentiate monokaryons from dikaryons in approximately one-third of Korean wild strains with homozygous genotypes. Three additional SNPs in the RPB2 gene, which may improve the ability to distinguish monokaryons from dikaryons, were identified by searching through the multiple sequence alignments of the 43 W. hoelen strains. The applicability of these three novel SNPs, together with the previously known SNPs, in the RPB2 gene to W. hoelen strain breeding was verified by examining the hybrid strains and their parental strains.

• Wind and Structures
• /
• v.34 no.1
• /
• pp.127-136
• /
• 2022

In this work a multi-fidelity non-intrusive polynomial chaos (MF-NIPC) has been applied to a structural wind engineering problem in architectural design for the first time. In architectural design it is important to design structures that are safe in a range of wind directions and speeds. For this reason, the computational models used to design buildings and bridges must account for the uncertainties associated with the interaction between the structure and wind. In order to use the numerical simulations for the design, the numerical models must be validated by experi-mental data, and uncertainties contained in the experiments should also be taken into account. Uncertainty Quantifi-cation has been increasingly used for CFD simulations to consider such uncertainties. Typically, CFD simulations are computationally expensive, motivating the increased interest in multi-fidelity methods due to their ability to lev-erage limited data sets of high-fidelity data with evaluations of more computationally inexpensive models. Previous-ly, the multi-fidelity framework has been applied to CFD simulations for the purposes of optimization, rather than for the statistical assessment of candidate design. In this paper MF-NIPC method is applied to flow around a rectan-gular 5:1 cylinder, which has been thoroughly investigated for architectural design. The purpose of UQ is validation of numerical simulation results with experimental data, therefore the radius of curvature of the rectangular cylinder corners and the angle of attack are considered to be random variables, which are known to contain uncertainties when wind tunnel tests are carried out. Computational Fluid Dynamics (CFD) simulations are solved by a solver that employs the Finite Element Method (FEM) for two turbulence modeling approaches of the incompressible Navier-Stokes equations: Unsteady Reynolds Averaged Navier Stokes (URANS) and the Large Eddy simulation (LES). The results of the uncertainty analysis with CFD are compared to experimental data in terms of time-averaged pressure coefficients and bulk parameters. In addition, the accuracy and efficiency of the multi-fidelity framework is demonstrated through a comparison with the results of the high-fidelity model.

• Journal of Korea Water Resources Association
• /
• v.55 no.9
• /
• pp.687-700
• /
• 2022

For comprehensively assessment the water resources performance of multi-purpose dams and water supply dams in South Korea, a methodology was proposed to utilize the durational reliability along with the integrated auxiliary indicators including resiliency, dimensionless vulnerability, water resource efficiency, specific inflow, and specific water supply. In addition, for the purpose of sustainable dam operation in the future, a plan to grade the water resources performance was presented to periodically evaluate the performance and determine the priority of each dam's structural or non-structural planning according to the evaluation results. As major results, in the case of Sumjingang Dam, the durational reliability was 99.0%, but the integrated auxiliary index was the lowest of 44 points, which was 5th grade. This means that despite the current high reliability, hydrological changes due to future climate change or regional change of water demand-supply balance can have significant impacts on the water resources performances. In contrast, the Chungju Dam with a durational reliability of 93.0%, which is below the average among all multi-purpose dams, shows the 76 points of the integrated auxiliary index, which is 3^rd highest following the Soyanggang Dam and the Namgang Dam. Nevertheless, due to the size of the basin, the specific inflow is sufficiently high as 185%, so the actual performance could be evaluated relatively high. The water supply dams designed for a single purpose tend to be evaluated relatively high because they have a high proportion of industrial and municipal water supply and have enough room for the supply capacity.

• Animal Bioscience
• /
• v.35 no.3
• /
• pp.461-474
• /
• 2022

Objective: This experiment investigated the effects of supplementing vitamin D₃-fortified sow and progeny diets with 25(OH)D₃ on growth performance, carcass characteristics, immunity, and pork meat quality. Methods: The present study involved the assessment of supplementing the diet of sows and their progeny with or without 25 (OH)D₃ in a 2×2 factorial arrangement on the performance and production characteristics of wean-finish pigs. Forty-eight multiparous sows were assigned to a basal diet containing 2000 IU/kg vitamin D₃ and supplemented without (CON) or with (TRT) 50 ㎍/kg 25 (OH)D₃. At weaning, a total of 80 pigs each from CON and TRT sows were allocated to weaning and growing-finishing basal diets fortified with 2,500 and 1,750 IU/kg vitamin D₃ respectively and supplemented without or with 50 ㎍/kg 25(OH)D₃. Results: Sows fed 25(OH)D₃-supplemented diets improved pre-weaning growth rate of nursing piglets. A significant sow and pig weaning diet effect was observed for growth rate and feed efficiency (p<0.05) during days 1 to 42 post-weaning. Pigs consuming 25(OH)D₃-supplemented diets gained weight faster (p = 0.016), ate more (p = 0.044) and tended to convert feed to gain more efficiently (p = 0.088) than those fed CON diet between days 98 and 140 post-weaning. Supplemental 25(OH)D₃ improved water holding capacity and reduced drip loss of pork meat, increased serum 25(OH)D₃ level, produced higher interleukin-1 and lower interleukin-6 concentrations in blood circulation, downregulated myostatin (MSTN) and upregulated myogenic differentiation (MYOD) and myogenic factor 5 (MYF5) gene expressions (p<0.05). Conclusion: Supplementing vitamin D₃-fortified sow and wean-finish pig diets with 50 ㎍/kg 25(OH)D₃ significantly improved production performance suggesting their current dietary vitamin D₃ levels are insufficient. In fulfilling the total need for vitamin D, it is strongly recommended to add 50 ㎍/kg 25(OH)D₃ "on top" to practical vitamin D₃-fortified sow and wean-finish pig diets deployed under commercial conditions.

• Journal of East Asia Management
• /
• v.4 no.1
• /
• pp.23-51
• /
• 2023

We investigate whether the association between management overconfident tone and the level of audit effort measured by audit fees and hours differs depending on the level of earnings management. Prior studies suggest that firms led by overconfident managers are likely to initiate risky investments, report low quality financial statements, and have material weaknesses in internal control system. These characteristics, combined together, result in higher audit risk. At the same time, auditors assess audit risk based on the quality of financial reporting, measured by level of earnings management. As a result, the assess audit risk is likely to reflect the combined effect of management overconfidence and the level of earnings management. In this paper, we investigate whether auditors differentiate the effects of real earnings management (REM) and accrual-based earnings management (AEM) when they assess the audit risk related management overconfident. Using the CEO's letter published in 2018, we measure the CEO's tone representing the degree of overconfidence (i.e., activity). Based on this measure, we find that the positive association between managerial overconfident tone and audit effort is more pronounced as the level of REM is higher. However, we find that the baseline association does not vary depending on the level of AEM. These results suggest that auditors consider the managerial overconfident severer when such characteristic accompany the higher level of REM, which can be outcome of aggressive business decisions possibly leading to the higher audit risks. We further find that these results are stronger for Big 4 auditors and continuing auditors. This paper contributes to the literature and practice as follows. First, we provide contextual evidence on how auditors reflect managerial characteristics in the audit process by documenting that auditors actively increase their audit efforts only when overconfident managerial characteristics are highly likely to lead to audit risk. This result suggests that auditors conduct external auditing considering both the efficiency and effectiveness of the audit process. Second, we suggest that auditors use information obtained from a wide range of sources to identify audit risks. Our results provide evidence of how the auditing standards, which do not provide detailed guidelines for audit risk assessment, are being applied in practice. Finally, our results also enhance the understanding of how audit fees are determined. Combined with the studies related to audit pricing, we provide the important reference for discussion between the auditor and the auditee about the audit fee that has created acute tension after the enforcement of the new External Audit Act.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.4
• /
• pp.15-24
• /
• 2007

Two kinds of temperature monitoring technology have been introduced in this study, which can measure coincidently temperatures at many points along a single length of cable. One is to use a thermal sensor cable comprizing of addressable thermal sensors. The other is to use an optic fiber sensor with Distributed Temperature Sensing (DTS) system. The differences between two technologies can be summarized as follows: A thermal sensor cable has a concept of "point sensing" that can measure temperature only at a predefined position. The accuracy and resolution of temperature measurement are up to the capability of the individual thermal sensor. On the other hand, an optic fiber sensor has a concept of "distributed sensing" because temperature is measured practically at all points along the fiber optic cable by analysing the intensity of Raman back-scattering when a laser pulse travels along the fiber. Thus, the temperature resolution depends on the measuring distance, measuring time and spatial resolution. The purpose of this study is to investigate the applicability of two different temperature monitoring techniques in technical and economical sense. To this end, diverse experiments with two techniques were performed and two techniques are applied under the same condition. Considering the results, the thermal sensor cable will be well applicable to the assessment of groundwater flow, geothermal distribution and grouting efficiency within about loom distance, and the optic fiber sensor will be suitable for long distance such as pipe line inspection, tunnel fire detection and power line monitoring etc.