• Journal of Chest Surgery
• /
• v.37 no.1
• /
• pp.1-10
• /
• 2004

Background: Currently, the cardiopulmonary machine with non-pulsatile pumps, which are low in internal circuit pressure and cause little damage to blood cells, is widely used. However, a great number of experimental studies shows that pulsatile perfusions are more useful than non-pulsatile counterparts in many areas, such as homodynamic, metabolism, organ functions, and micro-circulation. Yet, many concerns relating to pulsatile cardiopulmonary machines, such as high internal circuit pressure and blood cell damage, have long hindered the development of pulsatile cardiopulmonary machines. Against this backdrop, this study focuses on the safety and effectiveness of the pulsatile cardiopulmonary machines developed by a domestic research lab. Material and Method: The dual-pulsatile cardiopulmonary bypass experiment with total extracorporeal circulation was conducted on six calves, Extracorporeal circulation was provided between superior/inferior vena cava and aorta. The membrane oxygenator, which was placed between the left and right pumps, was used for blood oxygenation. Circulation took four hours. Arterial blood gas analysis and blood tests were also conducted. Plasma hemoglobin levels were calculated, while pulse pressure and internal circuit pressure were carefully observed. Measurement was taken five times; once before the operation of the cardiopulmonary bypass, and after its operation it was taken every hour for four hours. Result: Through the arterial blood gas analysis, PCO2 and pH remained within normal levels. PO2 in arterial blood showed enough oxygenation of over 100 mmHg. The level of plasma hemoglobin, which had total cardiopulmonary circulation, steadily increased to 15.87 $\pm$ 5.63 after four hours passed, but remained below 20 mg/㎗. There was no obvious abnormal findings in blood test. Systolic blood pressure which was at 97.5$\pm$5.7 mmHg during the pre-circulation contraction period, was maintained over 100 mmHg as time passed. Moreover, diastolic blood pressure was 72.2 $\pm$ 7.7 mmHg during the expansion period and well kept at the appropriate level with time passing by. Average blood pressure which was 83$\pm$9.2 mmHg before circulation, increased as time passed, while pump flow was maintained over 3.3 L/min. Blood pressure fluctuation during total extracorporeal circulation showed a similar level of arterial blood pressure of pre-circulation heart. Conclusion: In the experiment mentioned above, pulsatile cardiopulmonary machines using the doual-pulsatile structure provided effective pulsatile blood flow with little damage in blood cells, showing excellence in the aspects of hematology and hemodynamic. Therefore, it is expected that the pulsatile cardiopulmonary machine, if it becomes a standard cardiopulmonary machine in all heart operations, will provide stable blood flow to end-organs.

• Korean Journal of Food Science and Technology
• /
• v.42 no.4
• /
• pp.494-501
• /
• 2010

The purpose of this study was to examine the presence of Bacillus cereus, aerobic bacteria and coliforms in the raw material of infant formulas and investigate the manufacturing process in terms of microbial safety. Among ten kinds of raw infant formula material samples (n=20), Bacillus cereus appeared in two (n=4). Aerobic bacteria were not detected in raw infant formula material or maximum 4.15 log CFU/g. Eleven species of aerobic bacteria were isolated and 76% of them were Sphingomonas paucimobilis, Pseudomonas fluorescens, Rhizobium radiobactor, or Stenotrophomonas maltophilia. A Pearson's correlation analysis revealed that the most influential factors for detecting Bacillus cereus were aerobic bacteria and coliforms. In other words, when the measured values of aerobic bacteria and coliforms were higher, the possibility that Bacillus cereus would appear increased. In a regression model to predict Bacillus cereus, the rate of appearance was correlated with aerobic bacteria and coliforms, and its contribution rate for effectiveness was 86%. Improving microbial quality control by pasteurization, spray dry, popping and extrusion resulted in a decrease in the numbers of Bacillus cereus, aerobic bacteria and coliforms in the raw materials. The results suggest that a hazard analysis and critical control point system might be effective for reducing microbiological contamination.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.1
• /
• pp.3293-3301
• /
• 1974

An experimental work was conducted by using a laboratory-made model dryer to investigate the effect of the rate of natural forced-air on the drying rate of rough rice which was deposited in the deep-bed. The dryer consisted of 8 cylinderical containers with grain holding screen at their bottoms, each of which having 30cm in diameter and 15cm in height. The containers were sacked vertically with keeping them air-tight by using paper tape during dryer operation. Two separate layers of containers were operated in the same time to have two replications. The moisture contents of grains within each bins after predetermined period of dryer operation were determined indirectly by measuring the weight of the individual containers. The air-rates were maintained at 6 levels, or 5, 8, 10, 15, 18 and 20 millimenters of static head of water. The roomair conditions during dryer operation were maintained in the range of 10-l5$^{\circ}C$ in temperature and 40-60% in relative humidity. The results of the study are summarized as follows: 1. Drying characteristics of the grains in the bottom layers were approximately the same regardless of airdelivery rates, giving the average drying rate as about 0.35 percent per hour after 40-hour drying period, during which moisture content (w. b.) reduced from 24 percent to about 10 percent. 2. After about 40-hour drying period, the mean drying rates increased from 0.163 percent per hour to 0.263 percent per hour as air-flow rates increased from 5mm to 87.16mm of static head of water. In the same time, the moisture differences of grains between lower and upper layers varied from 12.7 percent at the air rate of 5mm of water head to 7.5 percent at the air-flow rate of 20mn of water head. Thus, the greater the air-flow rate was, the more overall improvement in drying performance was. Additionally, from the result of ineffectiveness of drying grain positioned at 70cm depth or above by the air rate of 5mm of static head of water it may be suggested in practical application that the height of grain deposit would be maintained adequately within the limits of air-rates that may be actually delivered. 3. Drying after layer-turning operation was continued for about 30 hours to test the effectiveness of reducing moisture differences in the thick layers. As a result of this layer-turning operation, moisture distribution through layers approached to narrow ranges, giving the moisture range as about 7 percent at air-flow rate of 5mm head of water, about 3 percent at 10mm head about 2 percent at 15mm head, and less than 1 percent at 20mm head. In addition, from the desirable results that drying rate was rapid in the lower layers and dully in the upper layers, layer-turning operation may be very effective in natural air drying with deep-layer grain deposit, especially when the forced air was kept in low rate. 4. Even though the high rate of air delivery is very desirable for deep-layer natural-air drying of rough rice, it can be happened that the required air delivery rate could not be attained because of limitation of power source available on farms. To give a guide line for the practical application, the power required to perform the drying with the specified air rate was analyzed for different sizes of drying bin and is given in Table (5). If a farmer selects a motor of which size is 1 or {{{{1 { 1} over {2 } }}}} H.P. and air-delivery rate which ranges from 8~10mm of head, the diameter of grain bin may be suggested to choose about 2.4m, also power tiller or other moderate size of prime motor may be recommended when the diameter of grain bin is about 5.0m or more for about 120cm grain deposit.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.5
• /
• pp.269-277
• /
• 2017

Recently, a submerged breakwater has been installing to prevent the erosion of shoreline everywhere. Artificially submerged breakwater is made to minimize the loss of nourishment sand beach erosion. For this reason, it has been indiscriminately constructed submerged breakwater that is planned in the country throughout. However, maintenance purposes to keep the shoreline of the beach is a method that is quite a few problems. There are also disadvantages such as expensive construction costs, ocean space utilization, water pollution and shoreline modification. In addition, person of utilizing the space of the ocean leisure does not like that because of the disconnection of ocean space. The beaches such as Gwanganri are artificially supplying nourishment sand to maintain the beach. The flexible construction method refers to a structure that is installed as a flexible material instead of submerged breakwater to prevent the loss of nourishment sand. In order to develop a new method to mitigate shoreline erosion, this study was carried out a hydraulic model experiment by installing a cell group as an example of the flexible method. Namely, in order to prevent the loss of nourishment sand, we decided to develop a new method that can mitigate the degree of beaches erosion by using cell group instead of submerged breakwater. In the two dimensional fixed hydraulic experiment, was carried out the effect reducing of wave height and the rate of low reflection due to the installation of the cell group. In movable bed experiment, the capture rate of the nourishment sand and the erosion prevention rate of the nourishment sand was performed for stability of shoreline. Therefore, according to the results of the hydraulic tests, it was possible to maintain the stable beaches due to installing the cell group on the erosion beaches, due to the effect of reducing wave height, the low reflection, the erosion prevention rate of nourishment sand, the high capture rate of nourishment sand.

• Economic and Environmental Geology
• /
• v.51 no.4
• /
• pp.381-392
• /
• 2018

This study examines strategies and implementation plans for commercializing $CO_2$ capture and storage, which is an effective method to achieve the national goal of reducing greenhouse gas. In order to secure cost-efficient business model of $CO_2$ capture and storage, we propose four key strategies, including 1) urgent need to select a large-scale storage site and to estimate realistic storage capacity, 2) minimization of source-to-sink distance, 3) cost-effectiveness through technology innovation, and 4) policy implementation to secure public interest and to encourage private sector participation. Based on these strategies, the implementation plans must be designed for enabling $CO_2$ capture and storage to be commercialized until 2030. It is desirable to make those plans in which large-scale demonstration and subsequent commercial projects share a single storage site. In addition, the plans must be able to deliver step-wised targets and assessment processes to decide if the project will move to the next stage or not. The main target of stage 1 (2019 ~ 2021) is that the large-scale storage site will be selected and post-combustion capture technology will be upgraded and commercialized. The site selection, which is prerequisite to forward to the next stage, will be made through exploratory drilling and investigation for candidate sites. The commercial-scale applicability of the capture technology must be ensured at this stage. Stage 2 (2022 ~ 2025) aims design and construction of facility and infrastructure for successful large-scale demonstration (million tons of $CO_2$ per year), i.e., large-scale $CO_2$ capture, transportation, and storage. Based on the achievement of the demonstration project and the maturity of carbon market at the end of stage 2, it is necessary to decide whether to enter commercialization of $CO_2$ capture and storage. If the commercialization project is decided, it will be possible to capture and storage 4 million tons of $CO_2$ per year by the private sector in stage 3 (2026 ~ 2030). The existing facility, infrastructure, and capture plant will be upgraded and supplemented, which allows the commercialization project to be cost-effective.

• Journal of Biomedical Engineering Research
• /
• v.24 no.5
• /
• pp.401-410
• /
• 2003

This study investigates the biomechanical efficacies of various cement augmentation techniques with or without pressurization for varying degrees of osteoporotic femur. For this study, a biomechanical analysis using a finite element method (FEM) was undertaken to evaluate surgical procedures, Simulated models include the non-cemented(i.e., hip screw only, Type I), the cement-augmented(Type II), and the cemented augmented with pressurization(Type III) models. To simulate the fracture plane and other interfacial regions, 3-D contact elements were used with appropriate friction coefficients. Material properties of the cancellous bone were varied to accommodate varying degrees of osteoporosis(Singh indices, II∼V). For each model. the following items were analyzed to investigate the effect surgical procedures in relation to osteoporosis of varying degrees : (a) von Mises stress distribution within the femoral head in terms of volumetric percentages. (b) Peak von Mises stress(PVMS) within the femoral head and the surgical constructs. (c) Maximum von Mises strain(MVMS) within the femoral head, (d) micromotions at the fracture plane and at the interfacial region between surgical construct and surrounding bone. Type III showed the lowest PVMS and MVMS at the cancellous bone near the bone-construct interface regardless of bone densities. an indication of its least likelihood of construct loosening due to failure of the host bone. Particularly, its efficacy was more prominent when the bone density level was low. Micromotions at the interfacial surgical construct was lowest in Type III. followed by Type I and Type II. They were about 15-20% of other types. which suggested that pressurization was most effective in limiting the interfacial motion. Our results demonstrated the cement augmentation with hip screw could be more effective when used with pressurization technique for the treatment of intertrochanteric fractures. For patients with low bone density. its effectiveness can be more pronounced in limiting construct loosening and promoting bone union.

• Korean Journal of Food Science and Technology
• /
• v.40 no.1
• /
• pp.82-87
• /
• 2008

Atopic dermatitis (AD) is characterized by chronic relapsing inflammation and is associated with hyper-production of immunoglobulin E (IgE). Recent studies have suggested that one of the treatments to alleviate symptoms of AD could be a supplementation of probiotics, Lactobacillus, Rhamnosus, Bifidus, etc. The purpose of this study was to evaluate the effects of probiotics on immune parameters in NC/Nga mice treated with 1-chloro-2,4-dinitro-benzene (DNCB). To induce atopic dermatitis, DNCB was treated to the back of mice for 2 weeks. Then, NC/Nga mice were divided into the four experimental groups randomly. Probiotics fragment, probiotics with other complex (Lactobacillus rhamnosus GG, Bifidobacterium lactis Bb-12LbL, L. plantarum K8, L. plantarum K8 fragment, ${\gamma}$-linolenic acid), antihistamine, and distilled water were administrated orally to the NC/Nga mouse for 4 weeks of experimental period. The groups were probiotics fragment group (DPF), probiotics with other complex group (DPOC), antihistamine group (DAH) and distilled water group (DDW) as a control group. The levels of serum IgE, interlukin-4 (IL-4), interlukin-5 (IL-5), interferon-gamma (IFN-${\gamma}$) and spleenocyte IgE were measured. The levels of serum IgE were significantly different among the four experimental groups. Before the treatment, there was no differences among the groups. However, from the first through the third week of the treatments, the levels of serum IgE in the probiotics (DPF, DPOC) and antihistamine (DAH) groups were lower than those of control group (p < 0.05). The levels of serum IL-4 of DPOC group was significantly lower than that of control group (p < 0.05) and serum IL-5 levels of DPF, DPOC, and DAH groups were significantly lower than that of control group. The levels of serum IFN-${\gamma}$ were not different among the four experimental groups. The levels of serum IgE in supernatant of spleen lymphocytes were not significantly different among the groups. These results suggest that probiotics supplementation showed partial effectiveness in the DNCB treated NC/Nga mice via modulation of IgE level and IL-4, IL-5 production. Based on these findings, probiotics exhibited the inhibitory effect via IL-4 production thereby inhibited the production of IgE in atopic animal model NC/Nga mice.

• Journal of Food Hygiene and Safety
• /
• v.25 no.2
• /
• pp.153-161
• /
• 2010

The purpose of this study was to examine the appearance of norovirus in the water for food in food service institutions and the influence of physicochemical and microbial factors of norovirus in order to work out basic data to predict the detection of norovirus. Among 82 samples of water for food in food service institutions, norovirus appeared in 7 samples and the rate of appearance was 8.5%. As for the type of norovirus, one samples contained GI type (genotype GI-6) and six samples contained GII type (genotype GII-2, GII-4, GII-12). In the regression model of prediction of norovirus, the rate of appearance was correlated with $NH_3$-N, total solids and the consumption of $KMnO_4$, out of such variables as $NH_3$-N, total solids, the consumption of $KMnO_4$, depth, chloride and total colony counts, and its contribution rate for effectiveness was 78.60%. In order to examine the influential factor of environment upon the detection of norovirus, Pearson's correlation analysis was carried out. The predictable regression formula for appearance rate of norovirus was expressed as -1.818 + 42.677 [$NH_3$-N] + 0.023 [total solids] + 0.762 [consumption of $KMnO_4$] -0.009 [depth] -0.146 [chloride] + 0.007 [total colony counts] (R = 0.904, $R^2$ = 0.818, adjusted $R^2$ = 0.786, p < 0.05). The most influential factors upon the detection of norovirus were $NH_3$-N, total solids and the consumption of $KMnO_4$. In other words, when the measured values of $NH_3$-N, total solids and the consumption of $KMnO_4$ were higher, the possibility of appearance of norovirus increased.

• Journal of The Korean Association For Science Education
• /
• v.36 no.4
• /
• pp.591-606
• /
• 2016

The purpose of this study is to develop the argumentation program to build scientific concepts on natural selection for science-gifted elementary students and to know how to implement this program. For this study, nine key concepts about natural selection such as the overproduction of offspring, limited resources, population stability, competition, variation, heredity of variation, differential survival, change of the population and speciation were selected through the literature study. The programs were developed by learning cycle instructional model. Argument writings and discourses have been collected, analyzed and compared before and after the program. Two questionnaires to compare pre and post concept change consist of multiple choice questionnaire and open-ended response question were developed and applied to 19 science-gifted elementary students. Sufficiency of the explanation and conceptual quality of the explanation were used to assess the quality of their arguments before and after the program. Discourse and visual models collected from the highest and lowest group about score improvement were compared. The scores of the gifted statistically improved significantly in multiple choice questionnaire. Students' alternative conceptions about natural selection at the beginning of the program decreased and changed scientifically after the program. Visual models drawn by the students supported the results as well. This study asserts that elementary science-gifted students are able to explain evolutionary perspectives about organism change and use the key concepts of natural selection. The study means that evolutionary perspective is possible to be reflected in elementary science curriculum for the gifted.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.6
• /
• pp.837-852
• /
• 2000

Backgrounds : Today, tuberculosis cannot only be cured medically, but also controlled by public health. Despite the overall worldwide decline in tuberculosis, the disease continues to be a significant problem among developing countries and in the slums of large cities in some industrialized countries. Particularly, this communicable disease has come into the public health spotlight because of its resurgence in the 1990's. our country has been operating the Korean National Tuberculosis Control Program since 1962, focusing around public health centers. Therefore, this study aims to compare the effectiveness of tuberculosis control activities, one of the major public health activities in Korea, by producing indexes, such as the yearly registration rate per 100,000 population and treatment compliance of tuberculosis on in small areas (communities). Methods : This work was accomplished by constructing a time-series analytic model using data from "1980~2000: the Yearly Statistical Report" with patient registry data of 234 City. County. District public health centers and by identifying the factors influencing the tuberculosis indexes. Results : The trends of pulmonary tuberculosis positive point prevalence and pulmonary tuberculosis negative point prevalence on X-ray screening have declined steadily, beginning in 1981 and continuing to 1998 by region (city, county, district). Although the tuberculosis mortality rate steadily shows a declining trend by year and region, but Korea still ranks first among 29 OECD countries in 1998, with a tuberculosis mortality rate of 7.1 per 100,000 persons, according to the time-series analysis for fatal diseases. Conclusion : The results of the study will form the fundamental basis of future regional health care planning and the Korean Tuberculosis Surveillance System on 2000. Since the implementation of local autonomy through the Local Health Act of 1995, it has now become vita1 for each city, county, district public health centers to determine its own priorities for relevant health care management, including budget allocation and program goals.