• Tribology and Lubricants
• /
• 제20권4호
• /
• pp.190-196
• /
• 2004

The effect of tangential loading on the subsurface stress field has been investigated numerically. As tangential load increases, the subsurface stress field expands more widely to the direction of the tangential load. Places of the maximum shear stress and the maximum effective stress are getting closer to the surface with the increasing tangential load. The tangential load in an elasto-hydrodynamic lubrication condition is so low that it does not affect the subsurface stress field.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.261-268
• /
• 2004

For cam and roller-follower contacting surfaces, the effect of tangential loading on the subsurface stress field at an elaso-hydrodynamic lubrication condition has been studied numerically. As tangential load increases, the subsurface stress field extended more widely to the direction of the tangential load. The positions of the maximum shear stress and the maximum effective stress are getting closer to the surface with the increasing tangential load. The tangential load at the elasto-hydrodynamic lubrication condition is of little consequence to the subsurface stress field.

• Structural Engineering and Mechanics
• /
• 제26권1호
• /
• pp.87-97
• /
• 2007

Some mixed mode fracture criterion may be converted in to elliptical or ellipsoidal formula with the aid of mathematical translation. Hence, the crack initiation in mixed mode fracture I+II emanating from notches, has been studied using notched circular ring specimens. On the basis of Irwin (1957) theory, a new criteria in mixed mode fracture I+II, based fracture elliptic criterion and notch stress intensity factors has been developed.

• 한국생산제조학회지
• /
• 제9권5호
• /
• pp.73-79
• /
• 2000

The applications of fracture mechanics have traditionally concentrated on cracks loaded by tensile stresses, and growing under an opening or mode I mechanism. However, many cases of failures occur from growth of cracks subjected to mixed mode loading. Several criteria have been proposed regarding the crack growth direction under mixed mode loadings. This paper is aimed at investigation of fatigue crack growth behaviour under mixed mode(I＋II) with variation of angle and pre-crack length in two dimensional branched type precrack. Especially the direction of fatigue crack propagation was predicted and effective stress intensity factor was calculated by finite element analysis(FEA. In this paper, the maximum tangential stress(MTS) criterion was used to predict crack growth direction. Not only experiment but also finite element analysis was carried out and the theoretical predictions were compared with experimental results.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.182-187
• /
• 2000

The application of fracture mechanics have traditionally concentrated on cracks leaded by tensile stresses, and growing under an opening or mode I mechanism. However, many cases of failures occur from growth of cracks subjected to mixed mode loading. Several criteria have been proposed regarding the crack growth direction under mixed mode loadings. This paper is aimed at prediction of fatigue crack growth behaviour under mixed mode(I+II) in two dimensional branched type precrack. In this paper, the maximum tangential stress(MTS) criterion was used to predict crack growth direction. Not only experiment but also finite element analysis(FEA) was carried out. The theoretical predictions were compared with experimental results in this paper

• Geomechanics and Engineering
• /
• 제25권4호
• /
• pp.341-345
• /
• 2021

1D sand compression response to ko-loading experiences volume contraction from low to high effective stress regimes. Previous study suggested compressibility model with physically correct asymptotic void ratios at low and high stress levels and examined only for both remolded clays and natural clays. This study extends the validity of Enhanced Terzaghi model for different sand types complied from 1D compression data. The model involved with four parameters can adequately fit 1D sand compression data for a wide stress range. The low stress obtained from fitting parameters helps to identify the initial fabric conditions. In addition, strong correlation between compressibility and the void ratio at low stress facilitates determination of self-consistent fitting parameters. The computed tangent constrained modulus can capture monotonic stiffening effect induced by an increase in effective stress. The magnitude of tangent stiffness during large strain test should not be associated with small strain stiffness values. The use of a single continuous function to capture 1D stress-strain sand response to ko-loading can improve numerical efficiency and systematically quantify the yield stress instead of ad hoc methods.

• Journal of Mechanical Science and Technology
• /
• 제16권5호
• /
• pp.599-608
• /
• 2002

Finite element analysis for the stress intensity factor (SIF) at the skin/stiffener structure with inclined central crack repaired by composite stiffened panels is developed. A numerical investigation was conducted to characterize the fracture behavior and crack growth behavior at the inclined crack. In order to investigate the crack growth direction, maximum tangential stress (MTS) criterion are used. Also, this paper is to study the performance of the effective bonded composite patch repair of a plate containing an inclined central through-crack. The main objective of this research is the validation of the inclined crack patching design. In this paper, the reduction of stress intensity factors at the crack-tip and prediction of crack growth direction are determined to evaluate the effects of various non-dimensional design parameter including; composite patch thickness and stiffener distance. We report the results of finite element analysis on the stiffener locations and crack slant angles and discuss them in this paper. The research on cracked structure subjected to mixed mode loading is accomplished and concludes that more work using a different approaches is necessary. The authors hope the present study will aid those who are responsible for the repair of damaged aircraft structures and also provide general repair guidelines.

• 소성∙가공
• /
• 제25권3호
• /
• pp.169-175
• /
• 2016

The hearth roll, which transfers the cold-rolled strip sheet in a Continuous Annealing Line (CAL), is always subjected to changes in the surface temperature and subsequently experiences thermal stress in service. These variations lead to the generation of thermal cracks on the hearth roll surface as well local plastic deformation. We performed finite element analysis to predict the thermal stress changes on the hearth roll surface and designed the collar shape of the hearth roll to minimize these thermal stresses. Results show that the hearth roll with a collar having an obtuse angle is much more effective than a hearth roll with collar having a right angle when the tangential stress, which is one of main causes leading to surface cracks, is compared for the various conditions. It was found that the tangential stress and the temperature on the surface of hearth roll can be reduced by 51.9% and 26℃ if the shape of roll on collar is re-designed.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1043-1058
• /
• 1990

본 연구에서는 전자기 성형법에 의한 원통형상의 가공재의 자유 확관성형 가 공에 대해서 유한요소해석법을 이용한 변형 및 응력해석을 수행하였다. 탄소성 재료 모형을 확장하여 변형 경화율이 변형률 및 변형률 속도의 지배를 받는 변형률 속도 종 속 탄소성 재료 모형을 도입하였고, 1차 제하 이후까지 포함하여 고속 성형시 변형률 속도 효과에 의해 발생하는 현상들에 대해서 연구하였다.결과의 비교 및 논의를 위 하여, 해석대상과 성형조건, 그리고 가공재에 작용하는 자기압력은 Suzuki의 것과 동 일한 것을 사용하였다.

• 한국지진공학회논문집
• /
• 제12권1호
• /
• pp.29-42
• /
• 2008

이번 연구의 목적은 시험기의 단부가 압밀중인 시료의 유효응력에 미치는 영향을 연구함에 있다. 압밀중에 시험기 단부와 시료사이의 마찰은 공진주 시험기 시료의 반경 및 접선방향의 유효응력을 감소시킨다. 하지만, 시료의 유효응력을 측정하는 것은 실용적이지 않다. 압밀중 시험기 시료 유효응력 상태를 평가하기 위해 두 가지 접근이 이루어졌다. 첫째, 응력상태를 추측하기 위해 신중하게 조절된 간극비와 응력이력을 가진 시료의 최대 전단 탄성계수가 측정되었다. 둘째, 여러 가지 시료 정수가 압밀중 시험기 시료의 응력상태에 미치는 영향을 분석하기 위해 유한요소법이 수행되었다. 이러한 실험 결과와 분석적 기법결과를 종합해서 압밀중 공진주 시험시료에서의 평균주응력을 예측하는 해석적 예제를 수행하였다.