• Composites Research
• /
• v.13 no.2
• /
• pp.8-21
• /
• 2000

In th is paper. the low degree of homogeneity issue in the effective modulus was studied for plain weave textile composites. Unit cell analyses were performed using multi-field macroelements. The effective moduli were calculated for finite and infinite configurations and the statistics assessment of the results was presented. Results indicated that the effective modulus of plain weave textile composites depended strongly on the fiber tow phase shift angles and the number of layers. As the number of layers increased, however, the distribution of the modulus showed concentration and higher degrees of homogeneity was attained.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1556-1559
• /
• 1987

In this paper, a new state assignment method is proposed for the implementation of the area-effective control part. Introducing the, concept of adjacency matrix to control table generated by SDL(Symbolic Description Language) hardware compiler, a state assignment method is proposed with which minimal number of flip flops and effective number of product terms can be obtained to accomplish the area-effective implementation. Also, with substituting the assigned code to state transition table, boolean equations are obtained through 2-level logic minimization. Proposed algorithm is programmed in C-language on VAX-750/UNIX and b efficiency is shown by the practical example.

• Nuclear Engineering and Technology
• /
• v.49 no.8
• /
• pp.1758-1771
• /
• 2017

In this study, to determine the most effective alloy for shielding against gamma-rays, the gamma-ray shielding parameters of six types of cerrobend alloys have been investigated. Gamma-ray interaction with the cerrobend alloys has been discussed mainly in terms of total mass attenuation coefficient (${\mu}_t$), half value layer (HVL), tenth value layer (TVL), effective atomic number ($Z_{eff}$), and effective electron density ($N_{eff}$). These parameters have been calculated by theoretical approach using the ParShield program in a photon energy range between 0.1 MeV and 100 GeV. The dependence of these parameters on the incident photon energy and chemical composition of the cerrobend alloys has been studied.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.1
• /
• pp.5-14
• /
• 2009

This study is to analyze numerically the spatial behaviors of the solute transport in a spatially correlated variable-aperture fracture under the effective normal stress conditions. Numerical results show that the solute transport in a fracture is strongly affected by the spatial correlation length of apertures and applied effective normal stress. According to increasing spatial correlation length, the mean residence time of solute is decreased and the tortuosity and Peclet number (is a dimensionless number relating the rate of advection of a flow to its rate of diffusion) is also decreased. These results mean that the geometry of the aperture distribution is favorable to the solute transport as the spatial correlation length is increased. However, according to the applied effective normal stress is increased, the mean residence time and tortuosity have a tendency to increase but the Peclet number is decreased. The main reason that the Peclet number is decreased, is that the solute is displaced by one or two channels with relatively higher local flow rate due to the increment of contact areas by increasing effective normal stress. Moreover, based on numerical results of the solute transport in this study, the exponential-type correlation formulae between the mean residence time and the effective normal stress are proposed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.6
• /
• pp.524-529
• /
• 2008

In this paper, in order to develop low loss multilayer actuator, piezoelectric properties of PZW-PMN-PZT multilayer actuator sintered at $900^{\circ}C$ low temperature were investigated according to the number of multilayer. The multilayer actuator was fabricated using tape casting method and used pure Ag internal electrode. The density above $8.0\;g/cm^3$ was obtained at all specimens. With increasing number of multilayer, effective electromechanical coupling factor($k_{eff}$) was increased. $k_{eff}$ of multilayer actuator shows the maximum value of 0.283 at 11 layers actuator. However, effective mechanical quality factor(Qm') was decreased according to the increase of number of multilayer. The Qm' of multilayer actuator showed the maximum value of 920 at 5 layers actuator.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1256-1258
• /
• 1990

A large number of trainings are requested for the artificial neural network using the backpropagation algorithm. It is shown that one dimensional search technique is effective to reduce the number of trainings through some numerical simulations.

• Transactions of Materials Processing
• /
• v.32 no.5
• /
• pp.239-246
• /
• 2023

To reduce the forming load due to the temperature drop, during the hot forging process, a reheating hot forging process design is required that to repeat heating and forging. However, if the critical strain required for recrystallization is not induced during forging and grain growth becomes dominant due to the reduction in dislocation density due to repeated heating, the mechanical properties may deteriorate. Therefore, in this study, Inconel 706 alloy was applied, and the grain refinement behavior was comparatively analyzed according to the number of reheating times and effective strain during reheating hot forging process. Reheating was carried out with a total compression rate of 40% up to 4 times. The Inconel 706 compression test specimens heated once showed finer grains as the effective strain increased due to the dynamic recrystallization phenomenon. However, as the number of heating increases, grain refinement was observed even in a low effective strain distribution of 0.43 due to static recrystallization during reheating. Moreover, grain growth occurs at a relatively low effective strain of 0.43 when the number of reheating is four or more. Therefore, it was effective to apply an effective strain of 0.43 or more during hot forging to Inconel 706 in order to induce crystallization through grain refinement and improve the properties of forged products. In addition, we could notice that up to three reheating times condition was appropriate to prevent grain growth and maintain fine grain size.

• Journal of Preventive Medicine and Public Health
• /
• v.53 no.6
• /
• pp.405-408
• /
• 2020

In epidemiology, the basic reproduction number (R₀) is a term that describes the expected number of infections generated by 1 case in a susceptible population. At the beginning of the coronavirus disease 2019 (COVID-19) pandemic, R₀ was frequently referenced by the public health community and the wider public. However, this metric is often misused or misinterpreted. Moreover, the complexity of the process of estimating R₀ has caused difficulties for a substantial number of researchers. In this article, in order to increase the accessibility of this concept, we address several misconceptions related to the threshold characteristics of R₀ and the effective reproduction number (R_t). Moreover, the appropriate interpretation of the metrics is discussed. R₀ should be considered as a population-averaged value that pools the contact structure according to a stochastic transmission process. Furthermore, it is necessary to understand the unavoidable time lag for R_t due to the incubation period of the disease.

• Journal of Preventive Medicine and Public Health
• /
• v.17 no.1
• /
• pp.85-93
• /
• 1984

In order to develop some indicies for the evaluation of village health worker's activities and to find out personal characteristics and other factors that affect the activities, an interview survey was conducted to thirty seven village health workers (VHW) in Sunwon, Naega and Bulun townships in Kangwha county, where the Community Health Project of Yonsei University, College of Medicine, has been implemented for the past ten years. In addition, daily activity records of the VHW's were also analyzed. The results are summarized below: First, meeting attendance rates, number of regular family visits, number of antenatal care visits and number of family planning visits were identified as the most meaningful criterion for the evaluation of the village health worker's activities. Second, personal factors that significantly affect the village health worker's activities were identified as age, educational background, living with in-laws, religion, presence of preschool child in the family, holding leader's position of village woman's association concurrently, and duration serving as a VHW. The more aged and the more educated VHWs were the more effective. Those VHWs who were living with in-laws, without preschool child in the family, holding the leader's position of the village woman's association, and the longer service duration were the more effective. Other factors that affect the VHW's activities were the number of households in the target village and the number of natural villages in the target villages. It showed that the smaller the size of number of households and natural villages, the higher the degrees of the effectiveness of the VHW.

• Korean Journal of Animal Reproduction
• /
• v.21 no.1
• /
• pp.9-18
• /
• 1997

These studies were carried out to establish an effective and practical system for commercialization of embryo production techniques by analyzing several factors influencing in vivo embryo production in Korean native cattle. In vivo embryos were flushed 226 times from 128 donors. The results obtained in studies on the factors influencing in vivo embryo production were as follows : 1. There were no significant differences in the number of total recovered, fertilized, transferable and freezable embryos among the hormone doses(FSH-P, 28∼34mg; SUPER-OV, 75IU) used for superovulation. However, over 30mg doses of FSH-P showed a slightly higher effect than others. 2. There were slight decrease in the number of fertilized, transferable and freezable embryos in 3 times repeated superovulation. But there were no significant differences among 1, 2 and 3 times repeated superovulations. 3. Age of donors did not affect the number of transferable and freezable embryos, but the number of fertilzed embryos were highest in 2∼3 years old donors and were lowest in 8∼9 years old donors(P<0.05). 4. Season had a significant effect on the production of embryos(P<0.05). the embryo production, and the number of fertilized, transferable and freezable embryos were most effective in summer and follow by spring, autumn and winter. 5. The number of transferable and freezable embryos was highest in donors flushed at 7∼8 days after estrus(P<0.05).