• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.955-961
• /
• 2004

A novel concept of feedback loop design for modal test and model updating is proposed. This method uses the closed-loop natural frequency information for parameter modification to overcome the problems associated with the conventional method employing the modal sensitivity matrix. To obtain new modal information from closed-loop system, controllers should be effective in changing modal data while guaranteeing the stability of closed-loop system. But it is very hard to guarantee the stability of the closed-loop system with non-collocated sensor and actuator set. In this research, we proposed a controller called mode-decoupling controller that can change a target mode as much as the designer wants guaranteeing the stability of closed-loop system. This controller can be computed Just using measured open-loop modeshape matrix. A simulation based on time domain input/output data is performed to check the feasibility of proposed control method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.317-318
• /
• 2007

In this paper, we propose an efficient timing closure methodology during physical implementation. Many types of slacks and closure solutions were introduced case-by-case. The major part of violations was managed by specified tools, but the exceptionally generated minor violation which was occurred through correlation error between tools was manually corrected by ASIC engineer. From the proposed method, we identified that the best effective method is to decrease the sum of intrinsic delay in case of setup time violation.

• International Journal of Internet, Broadcasting and Communication
• /
• 제16권1호
• /
• pp.124-131
• /
• 2024

Breast cancer classification using ultrasound, while widely employed, faces challenges due to its relatively low predictive value arising from significant overlap in characteristics between benign and malignant lesions, as well as operator-dependency. To alleviate these challenges and reduce dependency on radiologist interpretation, the implementation of automatic breast cancer classification in ultrasound image can be helpful. To deal with this problem, we propose a semi-supervised deep learning framework for breast cancer classification. In the proposed method, we could achieve reasonable performance utilizing less than 50% of the training data for supervised learning in comparison to when we utilized a 100% labeled dataset for training. Though it requires more modification, this methodology may be able to alleviate the time-consuming annotation burden on radiologists by reducing the number of annotation, contributing to a more efficient and effective breast cancer detection process in ultrasound images.

• 대한기계학회논문집B
• /
• 제40권11호
• /
• pp.689-695
• /
• 2016

연료전지의 성능에 가장 큰 영향을 주는 요소 중에 하나가 가스확산층과 촉매층에서 물의 거동이다. 따라서 가스확산층의 특성에 따른 유체의 거동의 변화를 이해하는 것은 연료전지의 성능개선과 가스확산층의 설계를 위한 필수적인 요소이다. 이 연구에서는 가스확산층의 설계요소인 기공도, 굴곡도와 유효확산계수를 수치적으로 계산할 수 있는 방법을 제안한다. 제안한 방법의 검증을 위하여 지름이 일정한 구형입자를 이용하여 기공도가 다른 다공체를 만들고 구형입자에 Bounceback 조건을 적용한 격자 볼쯔만법 유동해석을 수행하였다. 다공체 내의 유동효과를 나타내는 투과도는 다공체에 의한 압력강하와 평균유속으로 계산하고, 질량이 없는 입자의 평균 다공체 통과 거리로부터 계산한 굴곡도와 기공도를 이용하여 계산한 유효확산계수를 Neale의 이론식과 비교하여 정확하게 일치하는 것을 확인하였다. 이 방법은 실제 다공체의 이미지를 이용한 계산에도 수정없이 이용할 수 있어 연료전지의 성능향상과 설계를 위한 가스확산층의 특성분석에 활용될 수 있다.

• 한국정보과학회논문지:시스템및이론
• /
• 제33권3호
• /
• pp.193-204
• /
• 2006

대부분의 분산 웹 시스템은 Domain Name System(DNS)을 이용하여 사용자 요청을 분산한다. DNS 기반 부하분산 시스템은 구성하기 쉬운 장점이 있지만, 주소 캐싱 매커니즘에 의해 서버들 사이의 부하 불균형이 발생한다. 또한, 서버의 상태를 파악하기 위해서 DNS의 수정이 필요하다. 본 논문에서는 DNS의 동적 갱신(dynamic update)과 라운드로빈 방법을 이용한 새로운 부하분산 기법을 제안한다. 본 논문에서 제안하는 방법은 DNS의 수정 없이 동적인 부하분산을 한다. 본 논문에서 제안하는 시스템은 서버의 부하량에 따라 서버를 DNS 리스트에 동적으로 추가, 삭제한다. 부하가 많은 서버를 DNS 리스트에서 제거함으로써 사용자 응답시간이 빠르다. 동적인 부하분산을 위하여 CPU와 메토리 네트워크 자원의 사용률에 따른 부하분산 알고리즘을 제안한다. GUI 기반의 관리도구를 이용하여 손쉽게 제안하는 시스템을 관리할 수 있다. 실험을 통하여 본 논문에서 구현한 모듈들이 제안된 시스템의 성능에 많은 영향을 주지 않는다는 것을 보여준다. 또한 기존 라운드로빈 DNS와의 비교실험을 통하여 사용자 응답시간과 파일전송률이 더 빠르다는 것을 보여준다.

• 대한수의학회지
• /
• 제47권2호
• /
• pp.157-162
• /
• 2007

Lactic acid bacteria (LAB) has been regarded as a useful microorganism and tried to manipulate plasmid DNA for increasing the usefulness. Although several methods have been developed to isolate plasmid DNA from Escherichia coli (E. coli), these methods were not sufficient to apply to LAB with exception of O'Sullivan's lysis method. So, we evaluated plasmid DNA extraction from LAB using general E. coli preparation methods and tried to improve the extraction yield and DNA purity by modifying O'Sullivan's alkaline lysis method. To improve the extraction yield, salt and carrier were added to precipitant and those were incubated at $-70{^{\circ}C}$. Only incubation at $-70{^{\circ}C}$ was the effective method of those modifications. Purity of plasmid DNA was improved by two times of each centrifugation and phenol/chloroform extraction. However, DNA was damaged by twice extraction with phenol/chloroform. Also, exclusion of ethidium bromide showed negative effect to purity. Additionally, it was recommended that improvement of the extraction yield may be due to centrifugation at high speed for more time and to dissolving complete DNA pellet before addition of 7.5 M ammonium acetate. Extraction using this modification produced higher quality of plasmid DNA.

• Korean Chemical Engineering Research
• /
• 제53권5호
• /
• pp.632-637
• /
• 2015

Mesoporous $TiO_2$ granules were prepared by spray pyrolysis using nano-sized titania particles which were synthesized by a hydrothermal method, and they were evaluated as the photoanode of dye-sensitized solar cells. To enhance the cell efficiency, nanoparticles within granules were chemically interconnected by adding titanium ethoxide (TEOT) to colloidal spray solution. The resulting titania particles had anatase phase without forming rutile. $TiO_2$ granules obtained showed about 400 nm in size, the specific surface area of $74-77m^2/g$, and average pore size of 13-17 nm. The chemical modification of $TiO_2$ granules by adding TEOT initially to the colloidal spray solution was proved to be an effective way in terms of increasing both the light scattering within photoanode and the lifetimes of photo-excited electrons. Consequently, the light-harvesting efficiency of TEOT-modified granules (${\eta}=6.72%$) was enhanced about 14% higher than primitive nanoparticles.

• 대한간호학회지
• /
• 제34권7호
• /
• pp.1362-1371
• /
• 2004

Purpose: This study was to examine the effect of an obesity management program on the body weight, body-mass index, and physiological index of obese female high school students. Method: Students from one school were selected as the experimental group, and students from another school as a control group so the latter group wasn't exposed to the experiment. The experimental group and the control group were each organized with 20 students. The experimental group received 60 minutes of behavior modification once a week, for eight weeks. Result: The Body weight, and Body mass-Index of the experimental group significantly decreased after the obesity management program. Total-cholesterol, T-G, and LDL-C significantly decreased and HDL-C increased in the experimental group. Total-cholesterol, T-G, LDL-C and HDL-C between the experimental group and control group showed significant differences. Conclusion: These results indicate that the obesity management program had a great effect on decreasing the body weight and body-mass index of the female obese high school students, normalizing their physiological index. In conclusion, this program turned out to be one of the safest and most effective obesity-management methods that could be applied to female high school students.

• 한국전기전자재료학회논문지
• /
• 제22권7호
• /
• pp.616-621
• /
• 2009

Reduction of optical losses in crystalline silicon solar cells by surface modification is one of the most important issues of silicon photovoltaics. Porous Si layers on the front surface of textured Si substrates have been investigated with the aim of improving the optical losses of the solar cells, because an anti-reflection coating(ARC) and a surface passivation can be obtained simultaneously in one process. We have demonstrated the feasibility of a very efficient porous Si ARC layer, prepared by a simple, cost effective, electrochemical etching method. Silicon p-type CZ (100) oriented wafers were textured by anisotropic etching in sodium carbonate solution. Then, the porous Si layers were formed by electrochemical etching in HF solutions. After that, the properties of porous Si in terms of morphology, structure and reflectance are summarized. The structure of porous Si layers was investigated with SEM. The formation of a nanoporous Si layer about 100nm thick on the textured silicon wafer result in a reflectance lower than 5% in the wavelength region from 500 to 900nm. Such a surface modification allows improving the Si solar cell characteristics. An efficiency of 13.4% is achieved on a monocrystalline silicon solar cell using the electrochemical technique.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.295-298
• /
• 2007

Reduction of optical losses in crystalline silicon solar cells by surface modification is one of the most important issues of silicon photovoltaics. Porous Si layers on the front surface of textured Si substrates have been investigated with the aim of improving the optical losses of the solar cells, because an anti-reflection coating(ARC) and a surface passivation can be obtained simultaneously in one process. We have demonstrated the feasibility of a very efficient porous Si ARC layer, prepared by a simple, cost effective, electrochemical etching method. Silicon p-type CZ (100) oriented wafers were textured by anisotropic etching in sodium carbonate solution. Then, the porous Si layers were formed by electrochemical etching in HF solutions. After that, the properties of porous Si in terms of morphology, structure and reflectance are summarized. The structure of porous Si layers was investigated with SEM. The formation of a nanoporous Si layer about 100nm thick on the textured silicon wafer result in a reflectance lower than 5% in the wavelength region from 500 to 900nm. Such a surface modification allows improving the Si solar cell characteristics. An efficiency of 13.4% is achieved on a monocrystalline silicon solar cell using the electrochemical technique.