• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.659-666
• /
• 2004

Dynamic compaction has evolved as an acceptable method of site improvement by treating poor soils in situ. The method is often an economical alternative for utilizing shallow foundations and preparing subgrades for construction when compared with conventional solutions. In general, the installation purpose of dynamic compaction are to increase bearing capacity and decrease differential settlement within a specified depth of improvement. This method involves the s systematically dropping large weights onto the ground surface to compact the underlying ground. The weights used on dynamic compaction projects have been typically constructed of steel plates, sand or concrete filled steel shells, and reinforced concrete. Typically, weights range from 5-20 ton and base configurations are, circular or octagonal. In this study, the effective depth of improvement is evaluated based on the numerical analysis code, the dynamic analysis of FLAC-3D program, in order to analyze the influence parameters ; ground conditions, maximum applied load and the area of compaction plate.

• 한국관개배수논문집
• /
• 제19권1호
• /
• pp.19-29
• /
• 2012

The data of the agricultural water quality survey network was analyzed between from 1990 to 2010 in order to propose effective plans for water quality management by analyzing the characteristics of agricultural lakes and the change of water quality. The result of the analysis shows that there is a correlation between water quality and items that can be a function of water depth such as dam height, dam length, dam height/dam length ratio and active storage/surface area of lake ratio. This means that, Korean agricultural lakes, there is a correlation between water quality and water depth. Water quality of the lakes that have lower than 5m of active storage/surface area of lake ratio (effective water depth) especially tends to get worse rapidly. The Chl-a and COD concentration of Korean agricultural lakes have a tendency to increase between June and September. Therefore, we recommend first taking a water quality improvement project for the lakes preformed watershed management project, and taking a preventive short-term water quality improvement project for the unperformed lakes before June among lakes that have lower than 5m of effective water depth.

• 한국지반환경공학회 논문집
• /
• 제6권3호
• /
• pp.55-61
• /
• 2005

동다짐공법은 느슨한 지반의 개량에 주로 사용되는 공법으로 점착성 토사나 폐기물과 성토지반에도 성공적으로 적용되고 있다. 동다짐공법의 설계에 있어 지반개량심도의 결정은 중요한 요소이다. 그러나 개량심도는 다짐에너지 뿐만 아니라 다짐간격, 대상토질 특성, 포화정도 및 현장여건 등에 영향을 받고 있다. 본 연구에서는 개량심도 예측을 위하여 현장실험결과를 이용하였으며 다짐에너지, 토질특성 및 포화정도에 따른 개량심도를 평가하였다.

• 농촌계획
• /
• 제29권4호
• /
• pp.165-173
• /
• 2023

When addressing rural housing issues, it is crucial to consider various aspects and adopt a tailored approach that takes into account the local characteristics and specific needs. Providing guidelines for different stakeholders, whether residents themselves or experts involved in decision-making, is essential for effective management and improvements. In this study, an in-depth analysis of the housing situation in the target area where the rural housing improvement project was implemented was conducted. This involved engaging with residents from three villages through in-depth interviews to gain insights into their perspectives and needs. As a result, a set of housing improvement guidelines were developed, which are specific to each stakeholder group and are tailored to address the criteria of safety, aesthetics, and living environment. These guidelines facilitate informed decision-making by residents and experts alike, ensuring that improvements align with the unique circumstances of each situation, promoting a more holistic and effective approach to addressing rural housing challenges.

• 한국지반공학회논문집
• /
• 제39권10호
• /
• pp.5-18
• /
• 2023

일반적인 토공사에서 사용하는 진동롤러에 의한 층다짐을 급속충격다짐(RIC)공법을 이용한 일시 다짐으로 대체하면 토공에 소요되는 공사기간을 획기적으로 단축할 수 있다. 동적하중에 의한 다짐은 모래와 같은 조립질 토사에 적합한 공법으로 인식되고 있는데, 최근에는 매립 프로젝트의 주요 재료인 모래의 공급부족으로 세립분을 함유한 토사의 사용이 점차 증가하고 있다. 따라서 RIC와 같은 동적하중에 의한 다짐공법을 적용하기 위해, 세립분을 함유한 매립재료 사용 시의 유효개량심도에 대한 검증이 필요하다. 본 연구에서는 깨끗한 모래인 Sand fill과 세립분이 함유된 Public fill에 대한 RIC공법 적용 전·후의 현장시험 결과를 비교하여 세립분 함량에 따른 RIC공법의 유효개량심도에 대한 영향을 검토하고, 콘저항치 q_c를 사용한 다짐 품질관리기준과 관련된 문제를 논의하였다. 결론적으로 세립분을 포함하는 다양한 종류의 매립토사에 대한 다짐 품질관리를 위해서는 q_c 측정값의 정규화가 필요하며, 깨끗한 모래의 상대밀도 Dr=70%에 해당하는 다짐 품질관리기준은 정규화 콘저항치 Q_tn,cs=110으로 평가되었다. 이러한 결과를 바탕으로, RIC 품질관리 시에 적용 가능한 매립토사의 세립분 함량을 고려한 심도별 q_c 품질관리기준을 제안하였다.

• 한국농공학회논문집
• /
• 제51권1호
• /
• pp.33-39
• /
• 2009

A number of fallow paddies field continues to increase because of adverse agricultural circumstance such as upsurge income of foreign products, increase of labor costs in local community, imbalance between productivity and profitability etc. Such fallow paddies are necessary to be protected against weeds and trees. If fallow paddies are not managed, it will be devastated and needed cost for re-cultivation. Therefore, management of gradually increased fallow paddy fields should be conducted. In this study, the effect of plants growth inhibition and water quality purification through the control of flood in fallow paddy were examined in an experimental field. The managed and unmanaged fallow paddies through the control of water depth were constructed in the experimental field. The monitoring was conducted from 2005 to 2007. As the result, the managed fallow paddies were more effective than the unmanaged ones on the growth inhibition and water purification. In addition, when the fallow paddy is managed with regular water depth, it was the most effective in the plants growth inhibition.

• 한국재난정보학회 논문집
• /
• 제14권3호
• /
• pp.305-314
• /
• 2018

연구목적: 동치환공법은 유사한 동다짐공법에 비해 동치환 직경, 심도, 간격, 타격에너지(중추 무게와 낙하고), 지반강도 증대 효과, 지반 개량효율 등에 대한 연구 및 실증이 부족하다. 연구방법: 본 연구에서는 실트질 점토지반을 연구 대상 지반으로 선정하여 예비 동치환시공과 본시공 동치환의 2가지 경우로 나눠서 지반개량을 실시하고 효과를 분석하였으며, 결과를 바탕으로 적정 개량심도 결정 및 개량효과에 미치는 인자에 관하여 연구하였다. 연구결과: 실트질 점토 지반을 대상으로 동치환 적정 심도 결정, 지반개량효과에 끼치는 특성을 상세히 분석하여 동치환 시 적용할 수 있는 개량심도 ($D_R$) 관계식을 제안하였다. 결론: 동치환공법을 실트질 점토 지반에 적용한 경우, 동다짐공법의 낙하에너지보다 1.25~2.5배 증가시켜야 하는 것으로 나타났다.

• 한국염색가공학회지
• /
• 제5권2호
• /
• pp.134-138
• /
• 1993

Wool, silk and nylon 6 fabrics were treated with low-temperature plasma under atmospheric pressure of acetone/argon or helium/argon for 30 and 180 sec, and then dyed with leveling type acid dye, C.I. Acid Red 18 and milling type acid dye, C.I. Acid Blue 83. In spite of short time of the plasma treatment for thirty seconds, the color depth of wool fabrics was increased remarkably with both of the plasma gases, aceton/argon or helium/argon and with the kinds of dyes i.e., levelin type or milling type. But the atmosperic low-temperature plasmas did not increase the depth of silk and nylon 6 fabrics dyed with both of the acid dyes regardless of the teated time and plasma gases. It seems that low-temperature plasma by atmospheric-pressure discharge is effective for improvement of dyeing of wools as is the same way with the low-temperature plasma by glow discharge. The kinds of plasma gases and treated time did not influnce the depth of wool fabric pretreted with the atmosperic low-temperature plasmas.

• Geomechanics and Engineering
• /
• 제5권5호
• /
• pp.447-462
• /
• 2013

An analysis model for predicting the tip bearing capacity of drilled shafts in cohesionless soils is improved in this study. The evaluation is based on large amounts of drilled shaft load test data. Assessment on the analysis model reveals a greater variation in two coefficients, namely, the overburden bearing capacity factor ($N_q$) and the bearing capacity modifier for soil rigidity (${\zeta}_{qr}$). These factors are modified from the back analysis of drilled shaft load test results. Different effective shaft depths and interpreted capacities at various loading stages (i.e., low, middle, and high) are adopted for the back calculation. Results show that the modified bearing capacity coefficients maintain their basic relationship with soil effective friction angle ($\bar{\phi}$), in which the $N_q$ increases and ${\zeta}_{qr}$ decreases as $\bar{\phi}$ increases. The suggested effective shaft depth is limited to 15B (B = shaft diameter) for the evaluation of effective overburden pressure. Specific design recommendations for the tip bearing capacity analysis of drilled shafts in cohesionless soils are given for engineering practice.

• 한국지반공학회논문집
• /
• 제17권6호
• /
• pp.69-83
• /
• 2001

폐기물 매립지를 건설부지로 활용하기 위해서는 환경과 지반공학적 측면에 대하여 종합적인 검토가 이루어져야 한다. 환경적인 측면에서는 반드시 매립폐기물 특성에 따른 매립가스의 관리방안과 침출수에 대한 대책이 이루어져야 하며, 지반공학적 측면에서는 양호한 구조물 기초지반을 조성하기 위한 적용 가능한 공법의 검토가 필요하다. 본 연구에서는 대상부지를 대규모 폐기물 매립지반인 $\bigcirc$$\bigcirc$$\bigcirc$ 매립지반으로 선정하여 환경적인 측면에서는 폐기물 특성 조사를 실시하여 매립가스 발생량 측정에 따른 매립가스 관리방안수립 및 매립가스 이용에 따른 경제성을 검토하였으며, 지반공학적 측면의 검토를 위하여 국.내외의 폐기물 매립지반을 건설부지로서 활용한 사례조사를 실시하였으며 폐기물 매립지반에 적용 가능한 공법(동다짐 공법, PG pile공법)에 대하여 현장 시험시공을 실시하여 개량특성을 파악하였다. 연구결과 매립가스의 자원화 및 안정화후의 토지이용에 따른 경제적 수익성을 파악할 수 있었으며, 폐기 물 매립지반에서의 보강공법으로서 개량 필요 심도가 비교적 얕은 경우에는 동다짐 공법이, 심도가 깊은 경우에는 PG pile공법이 개량특성이 양호한 것을 파악할 수 있었다.