Improvement of tip analysis model for drilled shafts in cohesionless soils |
Chen, Yit-Jin
(Department of Civil Engineering, Chung Yuan Christian University)
Wu, Hao-Wei (Department of Civil Engineering, Chung Yuan Christian University) Marcos, Maria Cecilia M. (Department of Civil Engineering, Chung Yuan Christian University) Lin, Shiu-Shin (Department of Civil Engineering, Chung Yuan Christian University) |
1 | Chen, C.H. (2010), "Evaluation of compression behavior for digging construction pre-bored PC piles in drained soils", Master Thesis, Department of Civil Engineering, Chung Yuan Christian University, Chung Li, Taiwan. |
2 | Chen, Y.J. and Chu, T.H. (2012), "Evaluation of uplift interpretation criteria for drilled shafts in gravelly soils", Can. Geotech. J., 49(1), 70-77. DOI ScienceOn |
3 | Chen, Y.J. and Fang, Y.C. (2009), "Critical evaluation of compression interpretation criteria for drilled shafts", J. Geotech. Geoenviron. Eng., 135(8), 1056-1069. DOI ScienceOn |
4 | Chen, Y.J. and Kulhawy, F.H. (1994), "Case history evaluation of drilled shaft behavior", Rpt TR-104601, Electric Power Research Institute, Palo Alto. |
5 | Chen, Y.J., Chang, H.W. and Kulhawy, F.H. (2008), "Evaluation of uplift interpretation criteria for drilled shaft capacity", J. Geotech. Geoenviron. Eng., 134(10), 1459-1468. DOI ScienceOn |
6 | Chen, Y.J., Fang, Y.C. and Chu, T.H. (2009), "Evaluation of compression tip capacity for drilled shafts", Proceedings of International Foundation Congress and Equipment Expo, Orlando, Florida, March. |
7 | Chen, Y.J., Lin, S.S., Chang, H.W. and Marcos, M.C. (2011), "Evaluation of side resistance capacity for drilled shafts", J. Marine Sci. Tech., 19(2), 210-221. |
8 | Cai, G., Liu, S. and Puppala, A.J. (2012), "Reliability assessment of CPTU-based pile capacity predictions in soft clay deposits", Eng. Geo., 141-142, 84-91. DOI ScienceOn |
9 | Cai, G., Liu, S., Tong, L. and Du, G. (2009), "Assessment of direct CPT and CPTU methods for predicting the ultimate bearing capacity of single piles", Eng. Geo., 104(3-4), 211-222. DOI ScienceOn |
10 | Chin, F.K. (1970), "Estimation of the ultimate load of piles not carried to failure", Proceedings of 2nd Southeast Asian Conference on Soil Engineering, Singapore, June. |
11 | Ching, J. and Chen, J.R. (2010), "Predicting displacement of augered cast-in-place piles based on load test database", Struct. Saf., 32(6), 372-383. DOI ScienceOn |
12 | Chu, T.H. (2009), "Evaluation of interpretation criteria and capacity for drilled shafts in gravelly soils under axial and lateral loading", Master Thesis, Department of Civil Engineering, Chung Yuan Christian University, Chung Li, Taiwan. |
13 | Hansen, J.B. (1970), "A revised and extended formula for bearing capacity", Bull. 28, Danish Geotechnical Institute, Copenhagen, 5-11. |
14 | Das, B.M. (2010), Principles of Foundation Engineering, (7th Edition), Cengage Learning. |
15 | Department of the Navy, Naval Facilities Engineering Command (NAVFAC) (1982), Foundation and Earth Structure, Design Manual 7.2". |
16 | Fang, Y.C. (2007), "Evaluation of tip resistance and compression interpretation criteria for drilled shafts", Master Thesis, Department of Civil Engineering, Chung Yuan Christian University, Chung Li, Taiwan. |
17 | Hirany, A. and Kulhawy, F.H. (1988), "Conduct and interpretation of load tests on drilled shaft foundations", Detailed Guidelines, Rpt EL-5915(1), Electric Power Research Institute, Palo Alto. |
18 | Hirany, A. and Kulhawy, F.H. (2002), "On the interpretation of drilled foundation load test results", Proceedings of International Deep Foundations Congress, Orlando, Florida, February. |
19 | Kulhawy, F.H. (1991), "Drilled Shaft Foundations", Chapter 14: in Foundation Engineering Handbook (2nd Edition), Van Nostrand Reinhold, N.Y. |
20 | Kulhawy, F.H. and Mayne, P.W. (1990), "Manual on estimating soil properties for foundation design", Report EL-6800, EPRI, Palo Alto. |
21 | Kulhawy, F.H., Trautmann, H.C., Beech, J.F., O'Rourke, T.D., McGuire, W., Wood, W.A. and Capano, C. (1983), "Transmission line structure foundations for uplift-compression loading", Rpt EL-2870, EPRI, Palo Alto. |
22 | Marcos, M.C., Chen, C.H. and Chen, Y.J. (2011), "Evaluation of axial capacity of pre-bored PC piles in drained soils", J. Adv. Eng., 6(4), 321-326. |
23 | Schneider, J., Xu, X. and Lehane, B.M. (2008), "Database assessment of CPT-based design methods for axial capacity of driven piles in siliceous sands", J. Geotech. Geoenviron. Eng., 134(9), 1227-1244. DOI ScienceOn |
24 | Zhang, L.M., Shek, L.M.P., Pang, H.W. and Pang C.F. (2006), "Knowledge-based design and construction of driven piles", Proceedings of the Institution of Civil Engineers: Geotech. Eng., 159(3), 177-185. DOI ScienceOn |
25 | Vesic, A.S. (1963), "Bearing capacity of deep foundation in sand", Highway Research Board Record, No. 39, 112-153. |
26 | Vesic, A.S. (1975), "Bearing capacity of shallow foundation", Chapter 3: in Foundation Engineering Handbook, Van Nostrand Reinhold, N.Y. |