• 조명전기설비학회논문지
• /
• 제29권12호
• /
• pp.68-76
• /
• 2015

We examine the standalone lightning warning system (LWS) and its warning performances for three years. This system acquires and analyzes the data of cloud-to-ground strike (CG), intra-cloud discharge (IC) and electrostatic field (EF) to produce prior warnings with respect to the impending arrival of CG in the area of concern (AOC). The warnings in this system are carried out based on the fixed two areas method. To evaluate warning performances, we analyzed the statistics of warnings with probability of detection (POD) and false alarm ratio (FAR). Based on the previous study, we revised the trigger and clear conditions of lightning warning for improving the performances of the system. As a result of this revision, POD increased from 0.18 to 0.44 and FAR decreased from 0.96 to 0.78 during the summer of 2014. However, the LWS was not possible to trigger effective alerts (EA) because there was no effective lead time (LT) for the fixed two areas method. Problems related to the low detection efficiency of IC and the use of EF data for warnings still decreased POD and increased FAR. Hence, we proposed the development method of a new LWS (NLWS) that would be composed of integrated weather data, the flexible two areas and the user software in order to trigger EA and improve warning performances.

• 한국작물학회지
• /
• 제50권4호
• /
• pp.281-285
• /
• 2005

Pod dehiscence (PD), defined as the opening of pods along both the dorsal and ventral sutures, causes the seed to shatter in the field before harvesting and results in loss of seed yields. However, breeding for resistance to PD is difficult due to the complicated genetic behavior and environmental interaction. The objective of the present research was to analyze the genetic behavior of PD for improving the breeding efficiency of resistance to PD in soybean. PD after oven-drying the sampled pod at $40^{\circ}C$ for 24 hours was the most reliable to predict the degree of PD tested in the field. Keunolkong, a dehiscent parent, was crossed with non-dehiscent parents, Sinpaldalkong and Iksan 10. Using their $F_1\;and\;F_2$ seeds, PD was measured after oven drying the pod at $40^{\circ}C$ for 24 hours. The gene conferring PD behaved in different manners depending on the genetic populations. In the Keunolkong$\times$Sinpaldalkong population, PD seemed to be governed by single major recessive gene and minor genes, while several genes were probably involved in the resistance to pod dehiscence in the Keunolkong$\times$Iksan 10 population. Heritability for PD estimated in F2 population showed over $90\%$ in the two populations. High heritability of PD indicated that selection for resistance to PD should be effective in a breeding program. In addition, genetic mapping of quantitative locus (QTL) for PD in both populations may reveal that genes conferring PD are population-specific.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권1호
• /
• pp.1-13
• /
• 2010

A comparative study between a computation and an experiment has been conducted to predict the performance of a Pod type waterjet for cm amphibious wheeled vehicle. The Pod type waterjet has been chosen on the basis of the required specific speed of more than 2500. As the Pod type waterjet is an extreme type of axial flow type waterjet, theoretical as well as experimental works about Pod type waterjets are very rare. The main purpose of the present study is to validate and compare to the experimental results of the Pod type waterjet with the developed CFD in-house code based on the RANS equations. The developed code has been validated by comparing with the experimental results of the well-known turbine problem. The validation also extended to the flush type waterjet where the pressures along the duct surface and also velocities at nozzle area have been compared with experimental results. The Pod type waterjet has been designed and the performance of the designed waterjet system including duct, impeller and stator was analyzed by the previously mentioned m-house CFD Code. The pressure distributions and limiting streamlines on the blade surfaces were computed to confirm the performance of the designed waterjets. In addition, the torque and momentum were computed to find the entire efficiency and these were compared with the model test results. Measurements were taken of the flow rate at the nozzle exit, static pressure at the various sections along the duct and also the nozzle, revolution of the impeller, torque, thrust and towing forces at various advance speed's for the prediction of performance as well as for comparison with the computations. Based on these measurements, the performance was analyzed according to the ITTC96 standard analysis method. The full-scale effective and the delivered power of the wheeled vehicle were estimated for the prediction of the service speed. This paper emphasizes the confirmation of the ITTC96 analysis method and the developed analysis code for the design and analysis of the Pod type waterjet system.

• Journal of Korean Neurosurgical Society
• /
• 제56권3호
• /
• pp.218-223
• /
• 2014

Objective : C-reactive protein (CRP) and erythrocyte sedimentation rate (ESR) are often utilized to evaluate for postoperative infection. Abnormal values may be detected after surgery even in case of non-infection because of muscle injury, transfusion, which disturbed prompt perioperative management. The purpose of this study was to evaluate and compare the perioperative CRP, ESR, and white blood cell (WBC) counts after spine surgery, which was proved to be non-infection. Methods : Twenty patients of lumbar open discectomy (LOD) and 20 patients of posterior lumbar interbody fusion (PLIF) were enrolled in this study. Preoperative and postoperative prophylactic antibiotics were administered routinely for 7 days. Blood samples were obtained one day before surgery and postoperative day (POD) 1, POD3, and POD7. Using repeated measures ANOVA, changes in effect measures over time and between groups over time were assessed. All data analysis was conducted using SAS v.9.1. Results : Changes in CRP, within treatment groups over time and between treatment groups over time were both statistically significant F(3,120)=5.05, p=0.003 and F(1,39)=7.46, p=0.01, respectively. Most dramatic changes were decreases in the LOD group on POD3 and POD7. Changes in ESR, within treatment groups over time and between treatment groups over time were also found to be statistically significant, F(3,120)=6.67, p=0.0003 and F(1,39)=3.99, p=0.01, respectively. Changes in WBC values also were be statistically significant within groups over time, F(3,120)=40.52, p<0.001, however, no significant difference was found in between groups WBC levels over time, F(1,39)=0.02, p=0.89. Conclusion : We found that, dramatic decrease of CRP was detected on POD3 and POD7 in LOD group of non-infection and dramatic increase of ESR on POD3 and POD7 in PLIF group of non-infection. We also assumed that CRP would be more effective and sensitive parameter especially in LOD than PLIF for early detection of infectious complications. Awareness of the typical pattern of CRP, ESR, and WBC may help to evaluate the early postoperative course.

• 농약과학회지
• /
• 제18권3호
• /
• pp.191-195
• /
• 2014

국내 최초로 밀양에서 콩꼬투리혹파리의 발생시기, 콩꼬투리 피해율 및 ethofenprox 20EC의 방제효과를 조사하였다. 콩꼬투리혹파리에 의한 콩꼬투리의 전형적인 피해증상은 피해부위의 갈변 및 기형화로 나타난다. 콩 포장에서 타락법에 의해 조사된 콩꼬투리혹파리 성충은 콩의 개화시기인 7월 5일부터 발생하여 9월 중순까지 그 밀도가 증가하였다. 파종기에 따른 콩꼬투리혹파리에 의한 콩꼬투리의 피해협률은 5월 10일 파종에서 가장 심하였으며, 다음은 6월 11일 및 5월 26일 파종 순 이었다. 콩 생식생장기에 ethofenprox 20EC 1회 살포에 따른 콩꼬투리혹파리의 방제효과는 R2.5에서 92.9%로 가장 높았으며, 다음은 R2에서 87.9%, R3에서 83.6%이었으며, 나머지 처리시기에서는 약 19~66%로 낮았다. 따라서 콩에서 콩꼬투리혹파리의 효과적인 약제방제 시기는 개화성기와 착협시 사이인 R2.5로 여겨진다.

• 한국작물학회지
• /
• 제29권3호
• /
• pp.285-290
• /
• 1984

대두에 왜화제인 B 995와 CCC를 살포시기별(본엽 4, 5, 6 매), 농도별 (500, 1000, 2000, 3000 ppm)로 엽면살포하여 생육 및 수량에 미치는 영향을 구명하고자 본 실험을 수행하여 얻어진 주요결과는 다음과 같다. 1. 약제별로는 경장에서만, 살포시기별로는 결협율에만, 그리고 농도별로는 경장, 분지수, 결협율, 주당협수와 수량에서만 유의성이 인정되었다. 2. 견장의 단축은 CCC보다는 B 995가 더 효과적이었으며 결협율은 본엽4 매시의 살포에서 가장 높았다. 3.농도별효과를 보면 저농도보다는 고농도인 3,000ppm에서 경장의 단축, 분지수, 결협율 그리고 주당협수의 증가와 수량의 증대를 나타냈다. 4. 주경절수, 경건중, 엽록소와 100입중은 약제살포시기 및 농도별로 유의성이 없었다. 5. 수량은 경장과는 부의 상관이었고 분지수, 주당협수, 결협율과는 정의 상관이었다. 6. 왜화제의 엽면살포는 주요수량구성 요소증대에 상당히 효과적이었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권2호
• /
• pp.206-216
• /
• 2000

저자는 1996년 1월에서 1998년 10월까지 본원에서 하악지시상분할골절단술을 시행한 하악전돌증환자중 35명(남자15명, 여자 20명)을 무작위로 선정하여 수술전, 수술직후 및 술후 1년의 하악각변화를 분석한 결과 다음과 같은 결론을 얻었다. 1. 35명 환자의 하악각평균은 술직후에는 술전에 비해 $9.3^{\circ}$ 감소하였다가 술후 1년까지 $4.0^{\circ}$증가하여 술전에 비해 술후 1년의 하악각은 $5.3^{\circ}$감소하였다(p<0.01). 2. 35명 환자의 악교정수술전 하악각평균은 $129.4^{\circ}({\pm}6.27)$로 정상에 비해 유의있게 큰 값을 보였으며 하악지시상분할골절단술 후 1년의 하악각평균은 $124.1^{\circ}({\pm}6.33)$로 비교적 개선되었다. 3. 술전과 술후 1년 사이의 남녀의 하악각변화는 여자는 $5.4^{\circ}$감소, 남자는 $5.3^{\circ}$감소로서 남녀간에 유의한 차이는 없었다(p>0.05). 4. 35명의 하악지시상분할골절단술을 받은 환자의 술전과 술후 1년 사이의 하악각변화에서 하악각감소에 관여하는 가장 주요한 변수는 하악후퇴량이었다. 5. 35명의 하악지시상분할골절단술을 받은 환자의 술직후부터 술후 1년까지의 하악각변화에서 하악각증가에 관여하는 가장 주요한 요인은 수평회귀율이었으며 원심골편후방부의 흡수현상도 하악각증가에 관여하는 것으로 생각되었다. 결론적으로 하악전돌증 환자에 있어 하악각이 정상보다 큰 경우 하악지시상분할골절단술은 하악각개선에 효과적이었으며 하악각이 정상에 가깝고 과도한 하악후퇴량이 요구되는 경우는 Short lingual cut 방법, 부가적인 원심골편의 후방변연절제술, Obwegeser II 방법과 같은 하악우각부 형태를 유지하는 수술법을 선택함이 유리할 것으로 예상되고 술후 회귀방지책이 안정된 하악각유지에도 도움이 될 것으로 사료된다.

• The Korean Journal of Pain
• /
• 제11권2호
• /
• pp.253-257
• /
• 1998

Background: The purpose of this study was to examine the extent and evaluation of pain after total abdominal hysterectomy (TAH) and to establish correlation between three types of pain; pain at rest, pain with movement and pain with coughing (maximum pain). Methods: The present study compared quality of pain during pain management in 48 patients undergoing TAH. Patients received i.v. meperidine as loading dose in the recovery room and PCA with nalbuphine 90 mg, ketorolac 180 mg, buprenorphine 0.9 mg, droperidol 5 mg, plasma solution A 28 ml for 3 days. The PCA device used was the Baxter infusor$^{(R)}$ (PCA module PC-19-55, 0.5 ml/hr basal rate, 15 minute lockout interval). Patients were then interviewed on Operative Day (OPD), Postoperative Day 1, 2, and 3 (POD 1, 2 and 3) to assess their pain on a visual analogue scale (VAS) of 0 (none) to 10 (worst imaginable). Results: The mean pain score at rest was 2.0 on OPD and decreased to 0.7 on POD 3. The mean pain score with movement was 3.2 on OPD and decreased to 1.6 on POD 3. The mean pain score with coughing was 4.2 on OPD and decreased to 2.2 on POD 3. Conclusions: Patients' experience of three types of postoperative pain emphasizes the need for more effective pain management.

• 한국전산유체공학회지
• /
• 제22권1호
• /
• pp.59-66
• /
• 2017

The guideline of selecting the number of snapshot dataset, $N_s$ in proper orthogonal decomposition(POD) was presented via the analysis of Eigen values based on the singular value decomposition(SVD). In POD, snapshot datasets from the solutions of Euler or Navier-Stokes equations are utilized to SVD and a reduced order model(ROM) is constructed as the combination of Eigen vectors. The ROM is subsequently applied to reconstruct the flowfield data with new set of flow conditions, thereby enhancing the computational efficiency. The overall computational efficiency and accuracy of POD is dependent on the number of snapshot dataset; however, there is no reliable guideline of determining $N_s$. In order to resolve this problem, the order of maximum to minimum Eigen value ratio, O(R) from SVD was analyzed and presented for the decision of $N_s$; in case of steady flow, $N_s$ should be determined to make O(R) be $10^9$. For unsteady flow, $N_s$ should be increased to make O(R) be $10^{11\sim12}$. This strategy of selecting the snapshot dataset was applied to two dimensional NACA0012 airfoil and vortex flow problems including steady and unsteady cases and the numerical accuracies according to $N_s$ and O(R) were discussed.

• 한국항행학회논문지
• /
• 제24권1호
• /
• pp.1-8
• /
• 2020

본 연구에서는 항공기에 장착하여 S/C대역의 신호를 장거리 표적으로 방사하기 위한 장치를 개발하였다. 장치는 요구된 실효 등방성 복사전력을 충족시키기 위해 대역별 송신기와 광대역 안테나로 RF 인터페이스를 구성하였다. 장치의 외형은 항공기 연료탱크와 동일한 포드(pod) 형상으로 설계했고, 측정된 장치의 중량은 119.8 kg, 무게중심은 1391.35 mm 그리고 관성 모멘트는 46.07 ± 0.05(I_yy) kg·㎡과 45.36 ± 0.09(I_zz) kg·㎡로 모두 항공기 장착을 위한 요구도를 충족함을 확인하였다. 비행 안전을 확인하기 위해 전자기 간섭 시험(RE102, CE102), 환경시험(고온/저온 운용, 고도), 체계 내 전자기 적합성 시험 그리고 인체 전자기 복사 위해도 시험을 수행하였으며, 모든 항목의 시험 결과가 요구사항을 충족함을 확인하였다. 장치는 요구되는 전기적/기계적으로 요구되는 사항을 모두 충족함으로써 항공기 장착이 가능함을 확인하였다.