• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.127-130
• /
• 2001

실의 잔류토크는 싱글저지 편성물에서 스파이럴러티를 일으키는 중요한 요소 중의 하나이다 실의 잔류토크를 감소시키거나 제거하기 위해서는 물리적으로 안정된 토크밸런스를 유지하도록 하는 방법과 퍼머넌트 세팅(permanent setting)방법 등을 택하고 있다. (중략)

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2010년도 제3회 국제학회
• /
• pp.157-158
• /
• 2010

• 한국의류학회지
• /
• 제20권5호
• /
• pp.783-791
• /
• 1996

The effect of alkali treatment on the changes in characteristics, mechanical properties, and hand of polyester fabrics was studied. Two kinds of fabrics having different yarn deniers were treated varying weight loss. The results were as follows; 1. Changes in constructional characteristics by alkali treatment were: a decrease in weight & thickness of fabric, a decrease in yarn denier, a decrease in apparent density of fabric, an increase in porosity to air, and a change fiber surface. 2. As for the changes in mechanical properties by alkali treatment, findings were : an increase in WT, RT, MIU, LC, and WC, a decrease in LT, B,2HB, G,2HG,2HGS, MMD, SMD, and RC, ana an increase in drape. 3. Changes in hand by alkali treatment were: a decrease in KOSHI and HARE, an increase in FUUURAMI, SHARI, KISHIMI, and SHENAYAUASA, and an increase in T.H.V 4. In the case of the same weight loss, the hand of 40/24 fabric being composed of thinner yarns was better than the hand of 50/24 fabric. 5. When 50/24 fabric was treated to have the same weight with 40/24 fabric, so the yam deniers of two fabrics were the same, the hand of 50/24 fabric having larger weight loss was better than the hand of 40/24 fabric.

• 한국염색가공학회지
• /
• 제8권4호
• /
• pp.42-51
• /
• 1996

Alkaline hydrolysis to improve the hand of PET/acetate union fabric was studied in relation to skin saponification and retarding effect of salts on the alkaline hydrolysis of cellulose acetate fiber, accelerating effect of salts on the alkaline hydrolysis of PET fiber, and changes of total hand value(T.H.V) of PET/acetate union fabric treated with alkali/salt solution. It was found that the rate of saponification of acetate was delayed by the addition of salts such as LiCl, NaCl and CH$_{3}$COONa into NaOH solution below 10 minutes. The rate of shrinkage of acetate fabric treated with 5g/l NaOH solution at 9$0^{\circ}C$ and 60 minutes showed 20 % but it was decreased 8% by. the addition of 120g/l Concentration of inorganic salts. We could know that the rate of alkaline hydrolysis of filament yarn treated with alkali solution at 9$0^{\circ}C$ and 60 minutes was delayed about 3 % using 2,000T/M of hard twist yarn, especially acetate filament treated with alkali solution at 9$0^{\circ}C$ and 10 minutes was delayed about 10%. T.H.V. of PET/acetate union fabric was increased from 2.77 to 3.04~3.18 by the addition of salts into alkali solution.

• Macromolecular Research
• /
• 제17권6호
• /
• pp.378-387
• /
• 2009

This research compared three methods for producing and processing nanocomposite polypropylene filament yarns with permanent antimicrobial efficiency. The three methods used to mix antimicrobial agents based on silver nano particles with PP were as follows: 1) mixing of PP powder and inorganic nanocomposite filler with the appropriate concentration using a twin-screw extruder and preparing granules, 2) method 1 with a singlerather than twin-screw extruder, and 3) producing the masterbatch by a twin-screw extruder and blending it with PP in the melt spinning process. All pure polypropylene samples and other combined samples had an acceptable spinnability at the spinning temperature of $240^{\circ}C$ and take-up speed of 2,000 m/min. After producing as-spun filament yarns by a pilot plant, melt spinning machine, the samples were drawn, textured and finally weft knitted. The physical and structural properties (e.g., linear density, tenacity, breaking elongation, initial modulus, rupture work, shrinkage and crystallinity) of the as-spun and drawn yarns with constant and variable draw ratios (the variable draw ratio was used to gain a constant breaking elongation of 50%) were investigated and compared, while DSC, SEM and FTIR techniques were used to characterize the samples. Finally, the antibacterial efficiency of the knitted samples was evaluated. The experimental results revealed that the crystallinity reduction of the as-spun yarn obtained from method 1 (5%) was more than that of method 2 (3%), while the crystallinity of the modified as-spun yarns obtained with method 3 remained unchanged compared to pure yarn. However, the drawing procedure compensated for this difference. By applying methods 2 and 3, the drawing generally improved the tenacity and modulus of the modified fibers, whereas method 1 degraded the constant draw ratio. Although the biostatic efficiency of the nanocomposite yarns was excellent with all three methods, the modified fabrics obtained from methods 1 and 2 showed a higher bioactivity.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제33권2호
• /
• pp.132-137
• /
• 2016

Although silk textile shows excellent performance when used in clothing over a long period, its limited elongation and elasticity have restricted its extension to other textile and non-textile applications. In the present study, silk textile was produced using silk/polyurethane core-spun yarn and degummed to enhance its elongation and elasticity. The effects of degumming on the structure and mechanical properties of the silk textile were examined. Scanning electron microscopy observation revealed that the silk filaments became finer and more flexible with degumming, resulting in increased tangling of weft yarns and a highly shrunk textile structure in the weft direction. Although the strength of the degummed silk textile was decreased, its elongation greatly increased by 383% (a 16-fold increase) because of the degumming treatment. In particular, the elasticity of the silk textile was greatly improved. The silk textile exhibited ~30% reduction in the elongation after the second extension; however, the elongation almost did not change after 18 additional extension-recovery tests.

• 한국염색가공학회지
• /
• 제31권4호
• /
• pp.298-311
• /
• 2019

In this study, the mechanical properties and hand characteristics of the knitted and woven fabrics for bedding items are investigated in accordance with fabric structural parameters including the fiber type and proportion, the density of the fabric, and the knit/weave structure. The knit stitches and structure of the knit samples made an effect on tensile properties. The bending, shear and compression properties for the knit fabric were mainly affected by fiber contents of the samples. The tensile and bending properties of woven samples were highly correlated with the fabric density, thickness and structure, and those shear and compression properties were affected by the fiber contents and structure. Consequently, the primary hand values of the selected samples we developed were estimated to have good smoothness, fullness and softness, and soft feeling, which is well correlated to the parameters of consumer preference such as softness, warmness, and bulkiness. Also, their total hand values were increased.

• 감성과학
• /
• 제24권4호
• /
• pp.149-156
• /
• 2021

본 연구에서는 1500℃ 이상의 극한 열 환경에서 사용되는 소재인 SiC (silicon carbide) 섬유를 복합방적사로 제조한 후에 원단을 제직하고 제직된 원단의 역학적 특성을 KES-FB system으로 측정하고 측정된 역학적 특성 값으로부터 착용성능을 분석하여 방화복으로의 활용 가능성을 알아보았다. 그 결과 직물의 역학적 특성에서는 인장선형성(LT)과 인장레질리언스(RT), 전단강성(G)을 나타내는 값이 원사의 제조형태에 따라서 그 특성 값의 차이를 보였으며, 직물의 두께와 평량, 밀도 값이 전단히스테리시스(2HG)와 압축레질리언스(RC) 값에 영향을 준다는 것을 알 수 있었다. 의복착용 성능에서는 착용 시 부피감을 나타내는 두께에 대한 압축에너지의 비(WC/T) 값에서 SiC 복합방적사로 제조된 직물의 값이 가장 우수한 값을 타나내었으며, 방염성능에서는 SiC 복합방적사로 제조된 직물이 탄화길이와 잔염시간에서 KFI 성능기준을 만족하여 방화복으로서의 활용이 가능함을 확인할 수 있었다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.122-125
• /
• 2003

Easy-care성을 장점으로 하여 천연섬유 대체용으로 점차 차별화가 진행되며 개발된 PET 섬유는 범용적인 섬유특성으로 인해 의류ㆍ비의류용 분야에서 광범위한 소재로 많이 사용되고 있다. 고부가가치의 직물을 생산하기 위해서는 원사의 특성뿐만 아니라 원사 이후의 공정 특히 사가공공정에서의 각공정에 따른 絲의 물성을 파악하는 것이 중요하다. 원사를 가연하는 공정 중 최근 disk spindle과 큰축을 이루고 있는 belt 가연기구는 높은 생산속도와 균일한 가공사를 생산할 수 있어 많이 사용하고 있다. (중략)

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.73-76
• /
• 2002

최근 링 정방기의 생산속도 증가로 인해 사절 및 사물성에 큰 영향을 미치는 정방장력의 중요성이 더욱 커지고 있다. 링 정방장력은 스핀들 회전수, 트래블러 중량, 링직경, 콥 직경 등과 같은 공정인자와 링 레일 상하운동에 따른 벌룬 높이, 얀 가이드에서의 실 굴절각도, 콥의 권취 반경 및 공기저항 등에 의해서도 영향을 받게 된다[1]. 이와 관련하여 링 정방장력 해석[2], 정방 공정인자가 정방장력에 미치는 영향[3] 및 정방 공정인자가 방적사 물성에 미치는 영향[4] 등의 연구가 많이 이루어져 왔다. (중략)