• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.95-104
• /
• 2005

The research conducted to study the potential practicability of recycled aggregate concrete by analyzing the characteristics of concretes made of recycled quality aggregates produced by wet and dry process has found the following results. The air content of recycled aggregate concrete increased with increase of the substitut on rate due to mortar included while producing recycled aggregates. However, the concretes with aggregate produced by dry process had relatively low rate of increase in air content. The slump showed generally decreasing trend as the substitution rate of recycled aggregate increased regardless of the wet or dry process. It was assumed that the mortar particles remained in recycled aggregate absorbed the surplus hydration in concrete and decreased fluidity The compressive strength generally decreased as the substitution rate of recycled aggregate increased, however there was an increasing trend as well due to decreasing effect of water-cement ratio when the substitution rate of recycled aggregate reached 25, 50% after mix. This phenomena also appeared in early age, which meant that recycled aggregate concrete should not be retarded in setting when applied in the field. The tensile strength also reached the maximum when wet or dry recycled aggregate replaced with 25%. To conclude, recycled aggregates for concrete produced by wet or dry process are expected to demonstrate essential characteristics of concrete without significant decline in physical or dynamic quality when the substitution rate is below 25% although there are variations subject to water-cement ratio. However, slight differences are expected due to types of recycled aggregate and physical quality.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.877-880
• /
• 2008

Recently the press and institute recognized fly ash as it had excellent performance. Its research and applications are on the rise largely as a substitute for cement. On the contrary, it is in a situation that the regulation of high quality fly ash remains at a low level. Accordingly, this study was to establish 8000 class of fineness of fly ash and three levels of substitute like 15%, 3 0%, and 45% in order to analyze the replacement ratio and effect of water-binder ratio for fly ash that affected the properties of ternary system concrete. As a result of experiment by planning water-binder ratio for two levels like 40% and 50%, it increased the fluidity in a fresh state, and it decreased the air content. This study has found out the setting acceleration and reduction of heat of hydration. As for the strength property in a set state, this study has shown the tendency of being equal or higher in age 28 days.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.642-649
• /
• 2021

Energy saving standard for buildings are strengthened, the application of exterior insulation finishing system and thickness of insulation materials are increasing. Most buildings with exterior insulation finishing system is applied organic insulating material. Organic insulating material have workability, economic feasibility, reduction in construction cost, and excellent thermal insulation performance. However, Organic insulating material is very vulnerable to heat, so when a fire occurs, rapid fire spread and toxic gas are generated, causing many casualties. Inorganic insulating material can be non-combustible performance, but it is heavy and has low thermal insulation performance. Mineral wool has higher thermal insulation performance than other types of inorganic insulating material, but mineral wool is disadvantageous to workability and vulnerable to moisture. Glass bubble are highly resistant to water and chemically stable substances. In addition, the density of the glass bubble is very low and the particles are spherical, fluidity is improved by the ball bearing effect. Glass bubbles can be used with cement-based ino rganic insulating material to impro ve the weight and thermal insulatio n perfo rmance o f cement-based inorganic insulation. This study produced a inorganic insulating materials were manufactured using cement-based materials and glass bubble. In order to evaluate the insulation performance and flame retardant performance of cement-based super light-weight inorganic insulating materials using with glass bubble, insulation performance or flame retardant and non-combustible performance were evaluated after manufacturing insulating materials using micro cement and two types of glass bubbles. From the test result, Increasing the mixing ratio of glass bubbles improved the insulation performance of cement-based super light-weight inorganic insulating materials, and when the mixing ratio of glass bubbles was 10%, it sho wed sufficient flame retardant and no n-co mbustible perfo rmance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.261-267
• /
• 2017

The interest in biodiesel is increasing rapidly. As a result, the price of vegetable oil that is used as a raw material for biodiesel is skyrocketing. Studies of biodiesel using animal waste as a means of solving these problems are underway. Biodiesel produced from animal fat contains considerably more saturated fatty acids than that produced from vegetable oil. In addition, it has a high cetane number and a high heating value. On the other hand, the fluidity decreases at lower temperatures because of the large amount of saturated fatty acids. For the biodiesel production, waste chicken oil and soybean oil were first purified. The raw materials were mixed at various ratios from 1:9 to 9:1. The methanol / oil molar ratio was also changed from 7 mol to 15 mol. The entire reaction time was one hour. The results showed that the optimal mixing ratio of soybean oil to waste chicken oil was 3:7, and the optimal methanol / oil molar ratio was 13. Moreover, the BD yield was 90.2%, the FAME content was 96.6%, and the LAME content was 4.1%. This result satisfied the Korea Industrial Standard (KSM2413).

• The Korean Journal of Physiology
• /
• v.17 no.2
• /
• pp.135-142
• /
• 1983

$PGE_2$ and $PGF_{2{\alpha}}$ are known to act similarly in a number of animal tissues. They both facilitate regression of corpus luteum(Poyser, 1972; Fuch et al, 1974; Coudert et at, 1974) and stimulate contraction of uterine muscle (Laudanski et al, 1977; Porter et al, 1979; Hollingsworth et al, 1980). It is, however, not known whether these two prostaglandins exert similar actions in osmotic fragility of erythrocytes (Rasmussen et al, 1975) and $PGF_{2{\alpha}}$ alters conformation of membrane proteins (Meyers aud Swislocki, 1974). The former effect may not be mediated through changes in c- AMP concentration in the cell, since the adenylate cyclase activity in human erythrocyte is extremely low (Rodan et al, 1976; Sutherland et al, 1962) and the latter effect implies that physical state (or fluidity) of the membrane is altered by $PGF_{2{\alpha}}$. The present study was undertaken to elucidate mechanisms of action of $PGE_2$ and $PGF_{2{\alpha}}$ on the human erythocyte membrane by examining their effects on osmotic fragility and $Ca^{++}$ binding to the membrane fragments. The results are summarized as follows: 1) $PGE_2$ and $PGF_{2{\alpha}}$ increased osmotic fragility at concentrations above $10^{11}\;M$, the effect being similar for both hormones. The concentration of NaCl for 100% hemolysis was $1/16{\sim}1/17\;M$ in the presence of $10^{11}\;M\;PGE_2$ or $PGF_{2{\alpha}}$ and 1/18 M in the absence of the hormone (control). 2) When erythrocytes were suspended in 1/15 M NaCl solution, $44.2{\pm}4.3%$ of cells were hemolyzed. Addition of $10^{12}\;M\;PGE_2$ or $PGF_{2{\alpha}}$ did not increase hemolysis. When the concentration of the hormones was increased to $10^{11}\;M$, however the degree of hemolysis increased markealy to about 80%. No further increase in hemolysis was observed at concentration of the hormones above $10^{11}\;M$. 3) The additional hemolysis due to $10^{11}\;M\;PGE_2$ and $PGF_{2{\alpha}}$ appeared to he identical regardless of absence or presence of $Ca^{++}\;(0.5{\sim}10\;mM)$ in the suspending medium. 4) In the absence of prostaglandin, the binding of $Ca^{++}$ to the erythrocyte membrane increased curvilinearly as the $Ca^{++}$ concentration increased up to 5 mM above which it leveled off. A similar dependence of $Ca^{++}$ binding on the $Ca^{++}$ concentration was observed in the presence of $10^{11}\;M\;PGE_2$ or $PGF_{2{\alpha}}$, however, the amount of $Ca^{++}$ bound at a given $Ca^{++}$ concentration was significantly higher than in the absence of the hormones. 5) As in the hemolysis, $PGE_2$ and $PGF_{2{\alpha}}$ did not affect the $Ca^{++}$ binding at a concentration of $10^{12}\;M$, but increased it by about 100% at concentration above $10^{11}\;M$. These result indicate that both tile osmotic fragility of erythrocyte and the $Ca^{++}$ binding to the erythrocyte membrane are similarly enhanced by $PGE_2$ and $PGF_{2{\alpha}}$, but these two effects are not causally related. It is, therefore, concluded that the prostaglandin-induced hemolysis is not directly associated with alterations of the $Ca^{++}$ content in the membrane.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.8
• /
• pp.1328-1336
• /
• 2003

This study was done to investigate the effects of n-3, n-6 fatty acid and d-limonene on the hepatic membrane lipid composition, protein kinase C (PKC) and glutathione S-transferase (GST) activities in experimental rat hepatocarcinogenesis. Sprague-Dawley female rats were fed with two different types of dietary oil for 20 weeks. Corn oil (CO) and sardine oil (SO) were used at 15% by weight as a source of n-6 and n-3 fatty acid, respectively. One week after feeding, rats were intraperitoneally injected twice with a dose of diethylnitrosamine (DEN, 50 mg/kg body weight) and after 1 week 0.05% phenobarbital (PB) was provided with drinking water. Membrane fractional lipid composition showed that the content of cholesterol was higher in 50 group than CO group and also significantly decreased by d-limonene. The content of phospholipid was increased by carcinogen treatment but not affected by dietary oils or d-limonene. Membrane C/PL molar ratio was significantly decreased by d-limonene or carcinogen treatment in 50 groups but not in CO groups. Fatty acid composition was changed by dietary oils but not by carcinogen treatment or d-limonene. Cytosolic PKC activity was not significantly different by dietary oils, d-limonene or carcinogen treatment. However, membrane PKC activity was significantly increased by carcinogen treatment and decreased by d-limonene. Cytosolic GST activity was affected by d-limonene or carcinogen treatment in all dietary groups. These data indicate that dietary oils, d-limonene and carcinogen treatment can not change much membrane phospholipid composition. But membrane C/PL molar ratio was changed by carcinogen treatment and d -limonene although the effect was different between dietary oils. Therefore, it is suggested that different dietary oils and d-limonene can somewhat modulate the changes of membrane fluidity and activities of membrane bound enzymes like membrane associated PKC during carcinogenesis.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.117-124
• /
• 2009

The purpose of the study was to improve quality of high volume fly ash concrete. The study evaluated on the possibility of early quality improvement of high volume fly ash concrete with early strength gain admixture ('GA' below) developed by the preceding research. The study regarded applying naphthalene admixture ('NA' below) to mix proportion substituting FA 15 % to be plain. In the event of substituting FA 20, 25 and 30 %, the study compared engineering properties of concrete with plain by applying GA. Because of features of fresh concrete, fluidity falls down when GA is applied. Therefore, its use amount shall be increased. Only, in W/B 60 %, it was beneficial since slump loss was reduced about 35~70 mm than plain. The study could see that AE use should be increased proportionally since air content was reduced by coming from AE absorption operation of unburned coal content included in FA according to an increase in the amount of FA use. Reduction effect of bleeding could be anticipated since the amount of bleeding appeared at least in FA 20 %. Because of hardened concrete, time of setting appeared in the same level as plain when GA was applied. Therefore, it is judged that delay of setting can be reduced. In compressive strength, the study could check the same strength development as plain when GA was applied, having nothing to do with W/B and curing temperature. However, it is thought that we shall pay attention to GA use in the event of FA 30 % substitution. Freezing and melting resistance had less early value than plain. However, it is judged that there will be no problem of frost resistance since there is no a large difference between freezing and melting resistance and plain in overall. In accelerated neutralization, it was analyzed that a problem of weakening in neutralization appointed as a demerit when FA was applied in mass in proportion with GA use could be settled to some extent.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.1
• /
• pp.79-86
• /
• 2017

This study is related to a lamellar liquid crystal make-up cleansing formulation with a hologram-like unique appearance between two polarizing plates. Make-up cleansing formulations with a lamellar liquid crystal phase have been extensively studied for a long time, but there have been limitations in practical commercialization because of increasing turbidity and viscosity. In this study, to solve this problem, alkyl chains of surfactants were modified to increase the fluidity of the liquid crystal phase, and electrostatic repulsion force was increased by introducing anionic surfactant. The lamellar liquid crystal make-up cleansing formulation which introduced anionic surfactants can easily inhibit crystallization through electrostatic repulsion force, thereby showing excellent stability overtime, maintaining transparent appearance and viscosity. In addition, we have newly introduced an in vitro cleansing evaluation method using fluorescent material and in vivo imaging system (IVIS) for objective and quantitative cleansing ability evaluation. The excellent cleansing ability of lamellar liquid crystal cleansing formulation has been confirmed by newly developed evaluation method. On the other hand, when lamellar liquid crystal make-up cleansing formulation was placed between orthogonally arranged two polarizing plates, a specific pattern like a hologram can be observed. This phenomenon is presumably interpreted as the interference between the visible light passing through the liquid crystal formulation and the lamellar structure. The lamellar structure of cleansing formulation was confirmed by SAXS analysis, exhibiting Bragg spacing ratio of 1 : 2. The lamellar liquid crystal make-up cleansing formulation prepared in this study would be useful for future application in make-up cleansing due to its excellent stability, cleansing ability, and unique hologram-like pattern placed between two polarizing plates.