• 설비공학논문집
• /
• 제19권6호
• /
• pp.470-475
• /
• 2007

The present study has been conducted economic analysis through actual operation of electric heat pump (EHP) and gas engine driven heat pump (GHP) which are installed at the same building in the university. Cost items, such as initial cost, annual energy cost and maintenance cost of each system are considered to analyze life cycle cost (LCC) and economical efficiencies are compared. The initial cost is considered on the basis of actual cost, and annual energy cost is converted into the cost after measuring electricity and gas consumption a day LCC applied present value method is used to assess economical profit of both of them. Variables used to LCC analysis are electricity cost escalation rate, natural gas cost escalation rate, interest rate, and service lives when each of them are 4%, 2%, 8%, and 20 years. The result shows that EHP (148,257,306 won) is more profitable than GHP (161,239,296 won) by 8.05% (12,981,990 won).

• 한국건축시공학회지
• /
• 제12권4호
• /
• pp.386-392
• /
• 2012

In this study, life cycle cost (LCC) is analyzed according to insulation panel system type using a deterministic LCC analysis method. Through this analysis, it was found that the construction cost in the deterministic LCC analysis for Ceramic panels was low compared to the construction cost for metal and stone panels. Also, the difference in cost between the Ceramic panel and the metal panel was about 2 times. In the area of maintenance cost, it was found to be similar to the previously analyzed construction cost, in which the metal panel has the highest cost due to the high cost of construction and the frequent need for maintenance. In the case of the stone panel, a small difference in cost is shown compared with that of the Ceramic panel, but the cost is higher than the Ceramic panel. Regarding the cost of waste disposal, the Ceramic panel can reduce the cost by at least 1.5 times and up to 2 times compared to other panel systems. Finally, in the analysis of sensitivity according to changes in discount rates, the Ceramic panel and metal panel systems have a similar cost, and the cost of the metal panel is a bit larger than that of other panel systems. Thus, in the subjects used in the analysis, the Ceramic panel system shows the highest economic benefits.

• 대한토목학회논문집
• /
• 제33권3호
• /
• pp.1143-1151
• /
• 2013

도로 교통 소음을 저감하기 위해 신설 및 기존 도로의 소음 발생정도와 저감 대책을 결정 할 수 있는 합리적 방법이 필요하다. 본 연구에서는 방음벽뿐만 아니라 저소음 배수성 포장에 의한 소음 감소 효과를 예측하고 이를 이용하여 소음 편익을 고려한 경제성 분석을 통해 대안을 선정하는 방법을 제시하고자 한다. 저소음 배수성 포장의 소음 감소 효과 예측을 위해 시험포장구간에서 차량 이동식 측정방법으로 소음을 측정하고 이를 KHTN 프로그램을 사용하여 저소음 배수성 포장과 방음벽 적용 시 소음 감소 효과를 예측하였으며, 현장 측정 결과 예측소음과 실측소음이 유사한 것으로 나타났다. 이러한 소음 예측 기법을 사용하여 소음 저감 방안을 도출하고 생애주기비용분석을 통해 최적의 대안을 선정할 수 있었다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.334-339
• /
• 2007

This paper is concerned with economic analysis and comparison between hybrid and central air conditioning system by TRNSYS simulation and Life Cycle Cost(LCC) analysis. Hybrid air conditioning system that is using VAV for interior zone and system air-conditioner for perimeter zone is installed in building A. Central air conditioning system is composed of VAV and convector. The simulation was carried out in mode temperature level control using TRNSYS 16. From the result of simulation and LCC analysis, hybrid air conditioning system was better than central air conditioning system in initial cost and energy consumption.

• 대한건축학회논문집:계획계
• /
• 제34권3호
• /
• pp.23-34
• /
• 2018

Due to a waste of energy in korea, about 525,000 which are 75 percent of total buildings are at least 15 years old buildings that need remodeling. There are two current remodeling systems. One is a remodeling system to reduce a waste of resources from the reconstruction. The other is a green-remodeling system aimed to energy savings and reducing environmental costs. This study is to analyze quantitatively these current systems with respect to the cost-benefit caused by the life cycle and suggests the political and institutional implications through the interpretation of the results. For a quantitative analysis, we analyzed reducing maintenance costs and rent benefits with simulation by using opportunity costs, construction costs, plan costs and supervision costs as expense variables and using the reduced floor area ratio, institutional incentives, energy, water resources and certified emission reduction(CER) as benefit variables. As a result of the empirical study, the green-modeling was more beneficial in the field of environment such as the energy savings, however, the final benefits of remodeling which has no green building certification costs but more floor area ratio incentives were more economical. The green-remodeling system focused on reducing environmental costs and energy savings needs a equatable institutional incentive system.

• 자원리싸이클링
• /
• 제32권3호
• /
• pp.45-56
• /
• 2023

본 연구에서는 비촉매분야에서 사용된 로듐의 재자원화 시, 경제적 및 환경적 효과를 분석하였다. 분석방법으로, 경제적 효과 분석은 비용편익분석과 자원절감효과분석을 적용하였으며, 환경적 효과 분석은 전과정평가를 적용하였다. 연구결과, 경제적 측면에서 B/C 값은 1.28로 사업성이 있는 것으로 나타났으며, 비용절감은 재자원화 로듐 1 g 기준으로 237,000원로 나타나 2025년 로듐 재자원화량 71.7억원으로 나타났다. 환경적 효과는 로듐 1 kg 기준의 재자원화 시와 해외매각 시에 대해 온실가스 배출량을 비교하였다. 산정 결과, 로듐 1 kg 기준으로 재자원화 시 온실가스 배출량은 65 kg CO₂eq./kg-Rh, 해외매각 시 28,800 kg CO₂eq.으로 나타나, 99.8%가 저감되었다. 본 연구결과는 비촉매분야에서 사용되는 로듐의 재자원화 시 경제적 및 환경적 효과 분석을 통해 자원이 부족한 우리나라에서 로듐 재자원화가 필요하다는 것을 제시할 수 있었다.

• International Journal of Concrete Structures and Materials
• /
• 제3권2호
• /
• pp.103-110
• /
• 2009

Concrete carbonation is a cause of problems in concrete structures, so it needs to be estimated. And concrete cover is designed to protect structures from this damaging. Usually the cover thickness is considered based on the limit states design codes in which the important target is the reliability safety index. However, it is not clear that whether the safety index determined is optimal or not with respect to the cost. The codes are mainly proceeded quantitatively (i.e. making a safe structure) while the economic aspects are only considered qualitatively. So the reliability-based design considering life cycle cost (LCC) is called for, and here the focus is on the advanced analysis solution to optimize the reliability safety regarding LCC.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.157-159
• /
• 2012

In recent years, the number of high-rise buildings has been on the rise. As buildings have become larger in scale, significantly different issues related to their construction and maintenance have emerged. In addition, the automation and mechanization of the cleaning work for the curtain wall, one of the most frequently-performed tasks in building maintenance, is required as a fundamental measure. For this reason, a guide-rail type cleaning robot system is emerging as one of the measures in response to external factors, including gust. The major objective of this study is to propose an economic feasibility forecasting model and to apply the a building facade cleaning robot which is now under development.

• 한국수소및신에너지학회논문집
• /
• 제32권6호
• /
• pp.618-635
• /
• 2021

Environmental issues caused by our dependence on fossil fuels have caused our society to move toward new renewable sources of energy and chemicals. In this study, we develop an integrated process that co-produces butene oligomer (i.e., biofuels) and 1,3-butadiene (i.e., monomer for the production of synthetic rubber). To minimize utility consumption, we conduct heat integration. Then, we conduct a range of techno-economic analysis and life-cycle assessment to investigate economic and environmental feasibility of the proposed process.

• Wind and Structures
• /
• 제32권4호
• /
• pp.321-340
• /
• 2021

In 2019, 5.6% of the total energy produced worldwide came from wind. Offshore wind generation is still a small portion of the total wind generation, yet its growth is exponential. Higher availability of sites, larger producibility and potentially lower environmental impacts make offshore wind generation attractive. On the other hand, as the water depth increases, fixed foundations are no more viable, and the new frontier is that of floating foundations. This paper brings an overview of why and how offshore wind energy should move deep water; it contains material from the Keynote Lecture given by the first author at the ACEM20/Structures20 Conference, held in Seoul in August 2020. The paper is organized into four sections: the first giving general concepts about wind generation especially offshore, the second and the third considering economic and technical aspects, respectively, of offshore deep-water wind generation, in the fourth, some challenges of floating offshore wind generation are presented and some conclusions are drawn.