• Journal of Forest and Environmental Science
• /
• 제36권3호
• /
• pp.187-198
• /
• 2020

This study extracted deforestation area and degraded forestland area, which are potential REDD+ (Reducing Emissions from Deforestation and Forest Degradation) project candidate areas in Paraguay using Land Cover Map (LCM) and Tree Cover Map (TCM). The REDD+ project objectives scenarios were set three stages: 'afforestation and economic efficiency scenario', 'local capacity reinforcement scenario', and 'Infrastructure-oriented scenario'. And then, we evaluated the project unit suitable area of the REDD+ project. All scenarios selected the evaluation factors for each scenario in addition to the area ratio factors for deforestation area and degraded forestland area and weighted values were extracted by assigning category scores. As a result of the three scenarios comparison analysis, Concepcion state score was the highest. Within Concepcion state, the Belon district had the highest score, making it appropriate as a project unit REDD+ project candidate area in Paraguay, while the San Carlos district had the lowest score. This study can be used as basic data for selecting REDD+ project candidate area in Paraguay, and it is expected to contribute sufficiently to REDD+ project if additional data or information of social, cultural and economic sectors are secured.

• 한국병원경영학회지
• /
• 제8권1호
• /
• pp.42-63
• /
• 2003

There is a rapidly growing expansion of internet-based infrastructure throughout industries in Korea. The internet-based Electronic Purchase and Supply System(EPSS) is being considered a supportive tool to increase the economic efficiency of hospital management. In this study, we conducted an economic evaluation of the system, analyzing data on four hospitals in Korea. According to the results, four hospitals was estimated to make net benefit of about 611 million Won in one year and about 2,809 million Won in the next five years. Further, the adoption of all hospitals in Korea to the system may generate net benefit of about 31,575 million Won in one year and about 166,938 million Won in the next five years. Furthermore, we expect that as the system covered many kinds of inputs in hospitals like pharmaceuticals, the benefit of the system would go up by a considerable degree.

• 전기학회논문지
• /
• 제66권1호
• /
• pp.222-228
• /
• 2017

The aims of the demand response market are stabilization of the power supply and improving of the reliability of the power system. The various applications of the energy storage system (ESS) in the railway systems are studied and implemented to raise the energy efficiency. It is one of the most important how to determine the obligation reduction capacity (ORC) in participation to the demand response market because it has an influence on the profit extremely. In this paper, when participating to the demand response market with demands in the urban railway, we calculated the available ORC and economically evaluated ESS based on the real load data.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1995년도 특별강연 및 추계학술발표 개요집
• /
• pp.3-20
• /
• 1995

Development of Real-Time Quality Evaluation of Friction Welding by Acousitc Emission : Report 1 ABSTRACT : According as the friction welding has been increasingly applied in manufacturing various machine components because of its significant economic and technical advantages, one of the important concerns is the reliable quality monitoring method for a good weld quality with both joint strength and toughness in the process of its production. However no reliable nondestructive test method is available at present to determine the weld quality particularly in process of production. So this paper presents an experimental examination and quantitative analysis for the real-time evaluation of friction weld quality by acoustic emission, as a new approach which attempts finally to develop an on-line quality monitoring system design for friction welds using AE techniques. As one of the important results, it was confirmed, through this study, that AE techniques can be reliably applied to evaluating the friction weld qualify with 100% joint strength, as the cumulative AE counts occurring during welding period were quantitatively correlated with reliability at 95% confidence level to the joint strength of welds. Real-Time Evaluation of Automatic Production Quality Control for Friction Welding Machine : Report 2 Abstract : Both in-process quality control and high reliability of the weld is one of the major concerns in applying friction welding to the economical and qualified mass-production. No reliable nondestructive monitoring method is available at present to determine the real-time evaluation of automatic production quality control for friction welding machine. This paper, so that, presents the experimental examinations and statistical quantitative analysis of the correlation between the initial cumulative counts of acoustic emission(AE) occurring during plastic deformation period of the welding and the tensile strength of the welded joints as well as the various welding variables, as a new approach which attempts finally to develop an on-line (or real-time) quality monitoring system and a program for the process of real-time friction welding quality evaluation by initial AE cumulative counts. As one of the important results, it was well confirmed that the initial AE cumulative counts were quantitatively and cubically correlated with reliability of 95% confidence level to the joint strength of the welds, bar-to-bar (SCM4 to SUM31, SCM4 to SUM24L) and that an AE technique using initial AE counts can be reliably applied to real-time strength evaluation of the welded joints, and that such a program of the system was well developed resulting in practical possibility of real-time quality control more than 100% joint efficiency showing good weld with no micro-structural defects.

• 한국건설관리학회논문집
• /
• 제16권3호
• /
• pp.91-100
• /
• 2015

에너지 소비 절감 및 이산화탄소 배출 감소를 위한 노력의 일환으로 대다수의 선진국에서 리모델링 프로젝트를 장려하고 있으며, 이에 따라 건설산업에서 리모델링 사업은 큰 비중으로 성장하고 있다. 기존의 리모델링 관련 연구를 분석한 결과, 1) 리모델링 대안의 생성 및 선정 과정과 2) 건축물 경과년수에 따른 경제적 타당성 분석 결과가 제대로 반영되어 있지 않은 문제점이 있었다. 본 연구에서는 리모델링 대안에 따른 에너지절감량과 경제성을 동시에 고려하여 가장 비용효율적인 에너지절감형 리모델링 대안을 선정할 수 있는 의사결정 지원모델을 개발하였다. 개발된 프로세스 모델은 외피 시스템과 신재생에너지 설비를 조합한 "리모델링 솔루션"을 생성하며, 국제기준(ISO-13790, DIN V 18599)을 응용한 에너지성능평가, 생애주기비용 분석(LCCA)기법을 통한 경제성 평가를 실시하도록 구성되어있으며, 입력된 대안을 순환평가하여 최적의 대안을 출력하도록 구성하였다. 개발된 모델을 실제 사례에 적용한 결과, 비용효율적인 에너지절감형 리모델링 대안을 선정할 수 있는 것으로 확인하였다. 따라서 이 연구를 통해 개발된 모델은 리모델링을 계획하는 의사결정자(예: 발주자) 등에게 효율적인 대안 선정에 도움을 줄 수 있을 것으로 기대된다.

• 한국농공학회지
• /
• 제39권6호
• /
• pp.67-79
• /
• 1997

The perpose of this study was to suggest the experimental characteristic of the Cherepnov Water Lifter following the drain mode. The Cherepnov Water Lifter(CWL), which is powered by the potential energy of water, can be set to operate automatically when the water m a tank is drained. In this study, a CWL is constructed in the valve drain controlling mode(VCM) and the siphon drain controlling mode(SCM), and a pressure transducer is installed. It was found that, in the VCM, intake flow volume is proportional to both delivery flow volume and drain flow volume. In the SCM, intake flow volume is proportional to drain flow volume, and the average delivery rate is proportional to both efficiency and the water utilization ratio. Also, in the VCM, the water utilization ratio is 35~49%, efficiency is 62~9O%, average delivery rate is 12.8~81.2$cm^3$/s, and the average drain rate is 14.O~91.5c$cm^3$/s. On the contrary in the SCM, the water utilization ratio is 1.7~38%, efficiency is 3~58%, average delivery rate is 3.1 ~69.2$cm^3$/s, and the average drain rate is shown as 114.5~ 183$cm^3$/s. As a result of the water utilization ratio, efficiency, average delivery rate, and average drain rate are compared, the VCM is found to be superior and the more economical mode. However, the VCM requires manpower and electricity to operate the electronic machinery involved, while the SCM requires no manpower or electricity at all. An economic evaluation of these differences will be necessary in the future. Also, in the SCM, studies to improve water utilization ratio and efficiency, to find the optimum height of the siphon for decreasing the average drain rate, and to determine the radius of curvature of throat have to be conducted in advance, since a large flow rate is drained during the priming action of the siphon.

• 한국환경과학회지
• /
• 제23권8호
• /
• pp.1409-1418
• /
• 2014

Foundry has an important economic value in the industry. However, the generation of air pollutants like particulate and odor are serious. Due to the unavoidable usage of molding sand, particulate occurs in almost all the processes. That accounts for the majority of respirable dust in the size less than $10{\mu}m$ As well as particulate, over 22 species of odor-causing gases and VOCs including hydrogen sulfide and ammonia are occurred. Therefore, the development of equipment that can simultaneously remove TVOC and particulate is regarded as an essential research. In this study, the spraying absorbent system was connected with the shear bag filter for the purpose to remove TVOC and particulate simultaneously. Maximization of process efficiency for the affective factors like the powder combination and injection method is conducted. The experiment was performed at the de-molding process of one foundry plant. Through these devices, the removal efficiency of more than 95% for TVOC was achieved with the absorbent that composed by 800 mesh Activated carbon (80%) and 300 mesh zeolite (20%). Also, the durability and economic evaluation were assessed. In the result of Durability assessment, the available recovery to maintain the deodorizing effect at 90% was counted to 350 degree.

• 한국인터넷방송통신학회논문지
• /
• 제22권2호
• /
• pp.151-157
• /
• 2022

본 논문에서는 NFT 거래 시 거래비용과 처리시간의 증가 및 스마트 계약 실행 시 발생하는 거래 안정성 요구을 높이기 위한 방법으로 다양한 블록체인 합의알고리즘의 성능을 비교 분석하였다. 성능 비교를 위한 평가항목으로 네트워크 신뢰성, TPS, 합의알고리즘의 안정성의 세 가지 평가항목에 대하여 제시하였다. 각 평가항목에 대한 정형화된 식을 수립하기 위하여 연산식에 노드의 신뢰도와 스마트 계약 성공률 등을 변수로 고려하였으며 동일 조건하에 PoW와 Raft, PBFT 세 개 그룹의 합의알고리즘에 대하여 성능을 비교하고 분석하였다. 성능평가 결과 네트워크 신뢰도는 세 그룹의 성능이 유사하였으며 나머지 두 개의 평가항목의 경우 다른 합의알고리즘 대비 PBFT 합의알고리즘이 우수한 것으로 분석되었다. 본 연구의 성능평가 연산식과 결과를 통하여 PBFT 합의시 본 연구에서 제안한 처리 과정을 합의 과정에 반영하여 처리할 경우 네트워크 신뢰성을 보장하고 합의 알고리즘의 안정성과 경제적 효율성을 높일 수 있는 것으로 분석되었다.

• 자원환경지질
• /
• 제53권3호
• /
• pp.235-244
• /
• 2020

폐광산 지역에서 발생하는 광산배수의 오염원소중 하나인 구리(Cu)는 낮은 농도에서도 독성을 지니고 있어 수계환경에 노출되기 전에 처리되어야 한다. 본 연구에서는 경남 고성군 S광산의 갱내수 정화시설의 Cu 제거효율을 개선하기 위해 석회석과 폐상퇴비를 혼합한 자연정화 기반의 반응조를 이용하여 약 9개월 동안 현장 파일럿실험을 수행하였다. 반응조별 유입수 대비 pH 증가량과 Cu 제거효율은 Successive Alkalinity Producing System (SAPS) > Reducing and Alkalinity Producing System (RAPS) > 석회석반응조 순으로 나타났다. SAPS조와 RAPS조에서는 석회석의 영향과 동시에 유기물의 분해로 인한 알칼리도의 부과로 석회석반응조보다 높은 pH 환경을 조성하였다. pH가 증가할수록 Cu 제거효율이 높아지는 결과를 통해 pH 상승이 Cu를 처리하는 주된 기작임을 확인할 수 있었다. 또한 황산염환원박테리아(Sulfate Reduction Bacteria, SRB)가 SAPS조에서 가장 많이 활성화 된 것을 확인 할 수 있어, 황산염환원반응도 Cu를 제거시키는 기작에 관여함을 판단할 수 있었다. 본 연구는 S광산에서 발생하는 광산배수의 특성에 알맞은 맞춤형 정화공정을 도출하기 위해 현장 그대로의 조건에서 실험을 수행한 것에 의의가 있으며, 향후 정화시설의 개선에 있어 공법 선정에 도움을 줄 수 있을 것이다.

• 한국항만경제학회지
• /
• 제40권1호
• /
• pp.87-118
• /
• 2024

국내 운송을 담당하는 연안항들은 국가와 도시의 발전에 필수적인 역할을 하고 있다. 항만 효율성은 항만 경쟁력을 확보하기 위한 중요한 요소로, 이에 대한 연구는 기존 문헌에서 지속적으로 진행되었다. 중국의 경우 주로 지방의 항만 클러스터에 대한 연구에 초점을 맞추고 있는데, 미시적 관점에서만 접근하고 있으며, 최신 자료도 부재한 상황이다. 따라서 본 연구에서는 최신 자료를 활용하여 중국 상위 17개 연안항의 운영 효율성을 종합적으로 분석하고자 한다. 본 연구에서는 컨테이너 처리량을 산출변수로 선정하고, 크게 토지, 자본, 노동, 인프라에 속하는 13개 지표로부터 PCA(Principal Component Analysis) 분석을 통해 4개의 투입변수를 최종 선정하였다.그런 다음 17개 항구의 운영 효율성을 DEA (데이터 포위 분석)로 분석했습니다. 분석 결과, 상하이, 닝보-저우산, 광저우, 샤먼, 둥관의 5개 항만이 효율적인 반면, 나머지 12개의 항만은 상대적으로 비효율적인 것으로 나타났다. 본 연구는 중국의 연안항을 보다 거시적 관점에서 비교·분석한 것으로 이를 통해 상대적 비교가 가능하며, 향후 항만의 발전 전략 및 정책 수립을 위한 기초자료로 활용할 수 있을 것이다.