• KIEAE Journal
• /
• v.14 no.4
• /
• pp.69-79
• /
• 2014

Adverse effects resulting from the development of the environment and to minimize damage to the natural environment and the desire for pleasant scenery and the sense of raising more awareness about May 17, 2007 in accordance with the scenery method is established by each municipality landscape management and landscape planning committee Configure the district planning officer for development projects, including enhancing deliberation scenery method 7 February 2014 and revised in urban areas is more than $30,000m^2$ urban planning landscape projects are all considered by a committee mandated to landscape receive a defined landscape plan for the development was enhanced. Gyeonggi Province in 2007 after the enactment of the scenery method for district planning and landscape planning by strengthening the district planning consideration during deliberations landscape simulation by selecting the view that the proposed mandatory hearing officer from the Joint Committee on Urban construction was done. In this study, Gyeonggi-do district planning business point of view the characteristics of the landscape planning and landscape planning of the center of analysis and as a basis for the evaluation presented.

• KIEAE Journal
• /
• v.13 no.6
• /
• pp.39-44
• /
• 2013

As the use of electric vehicles perspectively increases, infrastructures for charging car batteries need to be properly planned for satisfying new requirements. This study aimed at theoretically investigating the relative laws, size of existing parking lots, and diverse car sizes for suggesting parking places for electric vehicles. In addition, potential problems for changing existing parking lots to new parking lots for electric vehicles were thoroughly considered. Based on the problem recognition, the feasibility, in particular, of the change of existing parking place to new place equipped with electricity charging systems was investigated. The comprehensive reviews and surveys revealed that additional systems for charging electricity need to be developed to be suspended on the ceiling for existing parking lots in order to prevent changing current layout of the space. This system will alleviate the perspective problems when the charging systems are located on the floor such as contamination, electric shock, and damage by cars. Further study will be followed for testing performance of the suggested systems in the actual parking lots.

• KIEAE Journal
• /
• v.13 no.6
• /
• pp.45-53
• /
• 2013

For the target goal of Zero-energy House construction in 2025, the government announced that the insulation regulations will be continuously enhanced. It has been predicted that high-performance insulation materials, such as vacuum insulation panel (VIP), should be used to decrease the thickness of outer walls. The aim of this study was to evaluate the performance of adhesively fixed external insulation and finish system (EIFS) with VIP. The energy performance of a base model with conventional internal insulation system and three alternatives of EIFS with VIP were analyzed by three-dimensional heat transfer simulation. Construction cost and convenience of each alternative were also evaluated and compared. As results, effective alternatives in terms of each performance as well as overall performance considering the weighting factors of each performance were suggested.

• KIEAE Journal
• /
• v.14 no.2
• /
• pp.61-68
• /
• 2014

This study aims at proposing a sound and sustainable development direction of an residential environment by analyzing testimonies of residents who lived in Park Hill flats or their surround at Sheffield City in the United Kingdom. The results are obtained through the analysis on a residential environment of Park Hill flats, opinions of the residents on its refurbishment, and effects of the building on the residential environment. The block of Park Hill flats was a community with a strong unity and solidarity, but that became increasingly a slum by the decline of the physical and social environment since the 1980s. In particular, it was identified that the deterioration of the social environment than that of the physical environment was a major cause of the decline. Nevertheless, it was found that "streets in the sky", the concept applied in Park Hill, played a key role in activating the community in the apartment complex. However, that street system in the complex has caused noise, poor security, and invasion of privacy. If such problems are solved, the streets in the sky will be a meaningful alternative for community activation and then ensuring sustainability in Korean residential environments that lost the function of the community.

• KIEAE Journal
• /
• v.8 no.4
• /
• pp.29-36
• /
• 2008

The rapid industrialization since the 1960s has caused considerable changes in the appearance of Korean cities. The huge demand and cityward tendency derived from the increase of population with such the expansion from 9 millions in 1960 to 43 millions in 2003, have resulted in number of problems such as the falling-off in the quality of life, amenity, and safety. And above all, the urban identities is not to be found obviously in the cities. With regard to these problems, the re-creation of cities should be emphasized to make environmental, economical, and social improvements and to restore human-oriented activities. In the course of making new improvements cities need to preserve the characteristics and maintain the concordance with their environments. In other words, the restoration of cities ought to be made in the aspect of continuity, which means the accession of genetic factors inherent in cities. In this background, concerning about the system on apartment house especially relating to environmentally sound restoration and comparing with that of Japan, this study proposes the direction needed in the development of urban space.

• KIEAE Journal
• /
• v.16 no.3
• /
• pp.129-135
• /
• 2016

Purpose: Building figuration is imperative to perceive the its value, environmental clean status and form. Therefore, maintenance activities of the building exterior are required to keep the housing condition and value. Each household should pay the repair cost which is brought out in the future. For this repair cost, the estimation model would needed to forecast and provide the required cost. This study aimed at providing the estimation model of the repair cost, using the repair survey data between the 2011 and 2014 in Seoul. Method: For these, it took various estimation function of repair cost such as 1st function, inverse function and so on. These above functions would be applied into the building exterior and outdoor facilities which figure the building shape and characteristics. Result: Results of this study are shown ; First, among 11 estimation models, the power function has a better statistics and goodness-of-fit than any other models. Second, the estimation model with a variable of household has a pattern in upward to the right. On the contrary, the model with management area is little downward to the right. Both of them are depended on the estimated parameter of the power function and the parameter smaller than 1.

• KIEAE Journal
• /
• v.14 no.1
• /
• pp.83-89
• /
• 2014

The residents' demand for the comfortable life is promoting development of wall and window which has high sound insulation performance. To develop wall system, various aspects should be considered on the environment, material, construction and structure. Especially focusing on the acoustical view, the economical solution is one of the most critical point. Recently the interest on the partition wall is being increased, because it is useful for the Rahmen type apartment which is considered as an alternative to reduce floor impact sound. This study examines simplified measurement method of airborne sound insulation applied small size specimen, in order to save money to be used for the standard specimen then to promote the development process. The results showed that the simplified method could be effective for the wall system the sound insulation performance upto Rw 50 dB, and for the judgement of rank order of sound insulation performance of the similar wall type while developing.

• KIEAE Journal
• /
• v.17 no.1
• /
• pp.49-54
• /
• 2017

Purpose: Temperature in urban areas increase much more than suburban areas and it is called urban heat island (UHI) phenomenon. There are several solutions to control UHI phenomenon such as green roof system, water space construction, and cool roof system. However, application of green roof system and cool roof system to some of the buildings which compose the city has a critical limit. Therefore, in order to diminish the temperature rising and UHI phenomenon due to climate change of the city, it needs to approach from the viewpoint of site or city, rather than the viewpoint of individual buildings. This study is aims at analyzing UHI phenomenon by characteristics of surface materials and suggesting the solutions to reduce UHI phenomenon by types of complex. Method: Literature reviews were conducted to analyze the cause, mitigating plan, and recent trends of UHI phenomenon. For the simulation analysis, the type of complex was classified 3 representative complex. Based on measured reflectivity, simulation about UHI phenomenon was conducted by setting 4 strategies; albedo of roof, road pavement, green roof system, and vegetating around buildings. Result: As the results of simulating the UHI reduction factor by types of complex, it showed that the effect of temperature reduction on the building roof layer is more effective than adjusting the reflectivity of buildings such as green roof system, planting near the buildings in both the detached house complex, apartment complex, and commercial complex.

• KIEAE Journal
• /
• v.12 no.1
• /
• pp.21-27
• /
• 2012

This study aims at finding the trend changes of spatial configuration in housing units of Korean apartments in the 2000s. Among the housing units in the apartments built by large construction companies, we have selected ones with small and regular sizes, $59m^2$ and $84m^2$ respectively, and investigated the number of bays, the location of wet zone and the spatial flexibility in the housing units selected for analysis. In conclusion, the number of bays in the housing unit has gradually increased, after allowing for the structural change of the balcony in the legal. It is estimated that the trend has came from the intent to increase the numbers of the externally exposed surfaces of the balcony, ensure a good view, lighting, ventilation and spatial flexibility. The location of wet zone, water-needed space such as a bathroom or a kitchen, has changed in the direction to facilitate the expansion and modification of space. Variable range of space has gradually expanded by using the balcony and wet zone as much as possible. In order to configure more effectively spaces in housing environments, the future study should be implemented to develop tools for realizing sustainable housing environment at the levels of not only the housing unit. but also the entire building, housing site, and city.

• KIEAE Journal
• /
• v.13 no.2
• /
• pp.141-149
• /
• 2013

This paper aims to provide pragmatic application guidelines of the interior finish materials for apartment houses with newly-established evaluation methodology of the sustainable degree of interior products. With reference to the standards and criteria of domestic eco-labeling accreditation schemes for sustainable products in the area of architecture which focus on the sustainable elements classified as the health, recyclability, durability, and energy efficiency, in this study, a systematic evaluation method has been established for interior finish products with quantifiable indicators for sustainable performance. Base on the evaluation system introduced here, most interior finish products can be classified into a database and applied effectively to the realities from the perspective of the sustainability. There are the necessities of enforcement issues with the idea of revising or taking remedial measures of the current performance criteria of domestic eco-labeling accreditation to bolster their reliability. As well as already-commercialized products, hereafter, continued efforts are needed to control the whole process of manufacturing new interior finish products from their designing, constructing, consuming, recycling and to dismantling in terms of sustainability, which promises more pragmatic follow-up measures for the detail embodiment of the environment-friendly spaces.