• Title/Summary/Keyword: early maturity

Search Result 542, Processing Time 0.031 seconds

TEMPERATURE CONTROL AND COMPRESSIVE STRENGTH ASSESSMENT OF IN-PLACE CONCRETE STRUCTURES USING THE WIRELESS TEMPERATURE MEASURING SYSTEM BASED ON THE UBIQUITOUS SENSOR NETWORK

  • Ho Kyoo JO;Hyung Rae KIM;Tae Koo KIM
    • International conference on construction engineering and project management
    • /
    • 2009.05a
    • /
    • pp.794-799
    • /
    • 2009
  • The temperature control of in-place concrete is the most important factor for an early age of curing concrete. Heat stress of mass concrete caused by the heat of hydration can induce the crack of concrete, and a frost damage from cold weather casting concrete results defect on compressive strength and degradation of durability. Therefore, success and failure of concrete work is dependant on the measurement and control of concrete temperature. In addition, the compressive strength assessment of in-place concrete obtained from the maturity calculated from the history of temperature make a reduction of construction cycle time, possible. For that purpose, wireless temperature measuring system was developed to control temperature and assess strength of concrete. And, it was possible to monitor the temperature of concrete over 1km apart from site office and to take a proper measure; mesh-type network was developed for wireless sensor. Furthermore, curing control system that contains the program capable to calculate the maturity of concrete from the history of temperature and to assess the compressive strength of concrete was established. In this study, organization and practical method of developed curing control system are presented; base on in-place application case.

  • PDF

The Effect of Sexual Maturity and Self-Concept on Interest in Appearance and Appearance Management Behavior for Female Students in Elementary and Middle School (초.중등 여학생의 성 성숙과 자기개념이 외모관심도와 외모관리행동에 미치는 영향)

  • Lee, Hwa-Jin;Shin, Hye-Won
    • Journal of Korean Home Economics Education Association
    • /
    • v.23 no.3
    • /
    • pp.185-200
    • /
    • 2011
  • The purpose of this study was to investigate if these factors affect the correlation between the female adolescent interest in appearance and appearance management behavior with self-concept and sexual maturity. To achieve this, a survey was conducted for the female students in elementary and middle school in the Seoul area. The results of this study were as follows. 1. The comparison of students' interest in appearance and appearance management behavior showed that the middle school students showed higher scores in both matters. 2. Elementary students generally held more positive self-concept, with domestic self value shown statistically high 3. Tanner Stage 2.3. the early puberty stage, for elementary school students, and Tanner Stage 3.4. the growth and development stage, for middle school students. The percentage of students who had already entered menstruating turned out to be only 33% for elementary students but 90% for middle school students. Their subjective views of sexual maturity were also different as elementary students had negative feeling when they thought their sexual maturity were maturity were earlier than their peers' while middle school students were just the opposite. 4. The study on the impact of self-concept and sexual maturity on the interest in appearance of female students in elementary and middle school showed that elementary students had a higher interest in appearance that corresponded to the lower domestic self-concept and a higher social self-concept. On the other hand, middle school students showed higher interest in appearance, corresponding to their higher social self-concept, lower domestic self-concept, more negative feeling of sexual maturity, and higher feeling of physical self-concept. The study on the impact of interest in appearance, self-concept, and sexual maturity on the appearance management behavior of elementary and middle school female students revealed that elementary students with a higher interest in appearance were more enthusiastic about appearance management. Middle school students' appearance management behavior turned out to be higher, corresponding to their higher interest in appearance, lower domestic self-concept, and higher social self-concept.

  • PDF

Assessing Impacts of Global Warming on Rice Growth and Production in Korea (지구온난화에 따른 벼 생육 및 생산성 변화 예측)

  • Shim, Kyo-Moon;Roh, Kee-An;So, Kyu-Ho;Kim, Gun-Yeob;Jeong, Hyun-Cheol;Lee, Deog-Bae
    • Journal of Climate Change Research
    • /
    • v.1 no.2
    • /
    • pp.121-131
    • /
    • 2010
  • This study was carried out to evaluate spatial variations in rice production areas by simulating rice growth and yield with CERES-Rice growth model under GCM $2{\times}CO_2$ climate change scenarios. A modified window version(v4.0) of CERES-Rice was used to simulate the growth and development of three varieties, representing early, medium, and late maturity classes. Simulated growth and yield data of the three cultivars under the climate for 1971 to 2000 was set as a reference. Compared with the current normal(1971 to 2000), heading period from transplanting to heading date decreased by 7~8 days for the climate in $2^{\circ}C$ increase over normal, and 16~18 days for the climate in UKMO with all maturity classes, while change of ripening period from heading to harvesting date was different with maturity classes. That is, physical maturity was shortened by 1~3 days for early maturity class and 14~18 days for late maturity class under different climate change scenarios. Rice yield was in general reduced by 4.5%, 8.2%, 9.9%, and 14.9% under the climate in $2^{\circ}C$, $3^{\circ}C$, $4^{\circ}C$, and about $5^{\circ}C$ increase, respectively. The yield reduction was due to increased high temperature-induced spikelet sterility and decreased growth period. The results show that predicted climate changes are expected to bring negative effects in rice production in Korea. So, it is required for introduction of new agricultural technologies to adapt to climate change, which are, for example, developing new cultivars, alternations of planting dates and management practices, and introducing irrigation systems, etc.

Studies on the Improvement Effects Associated with High Yielding Characters in Recommended Varieties of Winter Wheat(Triticum aestivum L. emend Thell) (밀 장려품종에 있어서 다수확 관련형질의 개량효과)

  • Chang-Hwan Cho
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.37 no.2
    • /
    • pp.123-133
    • /
    • 1992
  • This study was conducted to clarify progressed changes of plant types and the effects of the physiological and ecological components on improving ideotype of winter wheat. 12 wheat varieties were planted at the experimental farm of Wheat and Barley Research Institute in Suwon in 1990. As results of intensive wheat breeding for early maturity since 1959, heading, flowering and maturing dates have been shortened by 17, 15 and 14 dagys, respectively. The shortened days from sowing to heading and from heading to flowering contributed to the early maturity to improved. Physiological factors associated with heading time of wheat could be reprsented by growth habit, photoperiod responses, earliness in narrow sense and winter hardiness. For improving an early maturity of winter wheat, it would desired to maintain some degree of winter habit(III-IV), and recombination of more insensitivity to short day length and more shortened earliness in narrow sense than that of Saemil and Chugoku 81, and higher degree of winter hardiness. For improving the early maturity the more effective way must be of shortened days from sowing to heading, and days from flowering to maturity than days from heading to flowering. Ideotype of wheat will be desired to recombine two semi-dwarf genes with erect plant type being about 70-80cm, less stem elongation by late spring, long spike and many grains per spikelet. Average spike weight ratio was about 45-49% in high-yielding varieties, stem fresh weight was lighter, but spike fresh weight was heavier in new one while leaf fresh weight was similar to each other during the maturing periods. Average spike dry weight ratio was higher about 40~48%, and stem and leaf blade dry weights were lower in the newly bred varieties. Stem dry weight was heavier than spike or leaf dry weight in the old varieties of Yungkwang, Jangwang and Jinkwang. Leaf area index for the varieties showed normal distribution curve as the maximum point in booting stage. The maximum point of this curve come in early maturing wheat, and late in old one. The maximum points of LAI were 6.4~6.8 in the high-yielding varieties. Totals of LAI in each period investigated of old one were higher than those of newly bred being 24.6~28.8. Chlorophyll content of the high-yielding varieties of Chokwang, Geurumil and Saemil as higher than that of the old varieties Jangkwang, Jinkwang, Wonkwang and Sinkwang from regrowing period to April 21. after then slightly and even after heading. Net assimilation rate (NAR) was higher in high-yielding varieties with good plant type, and lower in old ones. Grain yield of the newly released varieties increased rapidly but slowly in the old ones. Change in water content of grain at the growing stage in newly bred was lower than that of the old bred. Diminishing rate of water content of grain in establishment per day was 1.2% average that of the old varieties including Yungkwang was 1.5%, and those of the newly bred including Chokwang were 0.9~1.1%. Chokwang, Naemil, and Saemil were the highest-yielding varieties of the Korean cultivars. Yields were increased by spikes per m$^2$, grain weight for the varieties bred in Suwon, and by spikes per m$^2$ for the varieties bred in Milyang.

  • PDF

Strength Development of the Concrete at Early Age subjected to Low Temperature depending on Admixture Types (혼화재 종류 변화에 따른 저온조건하 콘크리트의 초기강도 발현 특성)

  • Han, Min-Cheol
    • Journal of the Korea Institute of Building Construction
    • /
    • v.7 no.4
    • /
    • pp.145-151
    • /
    • 2007
  • In this paper, tests are carried out in order to investigate the strength development of concrete under various binder types, W/B and curing temperature ranged from $5{\sim}20^{\circ}C$. Fly ash and blast furnace slag were incorporated by as much as 30%, respectively. Strength development of concrete are estimated using Logistic model and strength ratio of concrete at 28days to that at early age are also investigated. According to experimental results, it is found that good agreements are obtained between measured values and calculated ones using logistic model below $20^{\circ}C$. Strength ratio of concrete at 28days to that at early age increases in case W/B decreases and curing temperature increases. Tables and graphs for strength ratio of concrete are provided in this paper. It is capable of obtaining and predicting the periods to attain design strength by considering increment factor of strength easily with the table and graphs presented in this paper. This paper presents the reference data to decide removal time of form, time to reach target strength and strength inspection of remicon whether the test specimens meet the specified criteria of compressive strength. Multi regression models with respect to the relationship between 7days compressive strength and 28 days compressive strength depending on W/B and admixture types are presented.

A study on the Practical Application of High Early Strength Type Concrete Using Fine Particle Classifying Cement (입도분급 미분 시멘트를 이용한 조강형 콘크리트의 현장실용화에 관한 연구)

  • Choi, Sung-Yong;No, Dong-Hyun;Kim, Ki-Hoon;Kim, Kyung-Min;Han, Min-Cheol;Han, Cheon-Goo
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2008.05a
    • /
    • pp.117-121
    • /
    • 2008
  • This study investigates practical application of high early strength type concrete using fine particle classifying cement, and the results are summarized as following. The replacement use of FC 30% did not great influence on concrete mix, therefore mixing without additional SP and AE was available using equal mix with OPC. The ratio of increasing temperature by heat of hydration was similar with OPC, and the compressive strength was over then 5MPa at -28℃ outside temperature on 2nd day. Therefore, it is considering that the first purpose, the effect of shortening terms of work by early demolding, will be available. The rebound rate of type "P" schumidt hammer was relative with compressive strength, and the rebound rate for verifying 5MPa of compressive strength was estimated about 55 considering rate of safety. Therefore, assuming demolding date is available efficiently.

  • PDF

Assessments of Rice Yield Loss According to Infection Time of Neck Blast (병 이삭도열병의 발병시기에 따른 수량감소 비교)

  • Shim, Hong-Sik;Kim, Yong-Ki;Han, Seong-Sook;Sung, Jae-Mo
    • Research in Plant Disease
    • /
    • v.9 no.2
    • /
    • pp.68-71
    • /
    • 2003
  • Correlation between rice yield loss and infection time of neck blast after panicle emergence was analyzed in paddy fields at Icheon in 1999 and 2000. As the neck blast occurred at early heading stage, the yield loss of a early maturity variety, Jinmibyeo, ranged from 83.9% to 81.6%, while it ranged from 44.3% to 33.1% when the disease developed 30 days after heading. The regression equations of yield loss(y) caused by the neck blast infection time(x) in Jinmibyeo were y =1.2717x + 79.523(R2 = 0.9487) and y = 1.6872x + 74.545(R2 = 0.7993) in 1999 and 2000. In a mid-lately maturity variety, Chucheongbyeo, yield loss ranged from 64.9% to 47.8% when the disease developed at early heading stage. While it ranged from 29.1% to 8.9% when the disease occurred 40 days after heading. The regression equations of yield loss caused by the disease in Chucheongbyeo were y= 1.2717x + 79.523($R^2$ = 0.9487) and y = 1.6872x + 74.545(($R^2$ = 0.7993) in 1999 and 2000. Weights of 1,000 rice grains of Jinmibyeo and Chucheongbyeo were also drastically decreased to 38.3% and 57.3%, respectively, compared to healthy control when the disease occurred at early heading stage. However, weights of the two cultivars were 87.6% and 92.9% compared to control when the disease developed after 40 days of heading. Results indicated that there is a highly negative correlation between rice yield loss and infection time of the neck blast.

The Effect of Physico - Chemical Environmental Parameters on Early Composting of Paper - Mill Sludge Cakes (이화학적 환경변수가 제지슬러지케이크의 조기부숙에 미치는 영향)

  • 최홍림;김현태;하호성;정영윤;남상일;서형덕;정원준
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.34 no.3
    • /
    • pp.75-84
    • /
    • 1992
  • The paper manufactories in Sangpyeong Industrial Estates, Chinju, produce more than 80 tons of paper-mill sludge cakes every day, which costs about 840 million won for dump per year. Since the paper-mill sludge is biodegradable, the sludge can he utilized as an organic fertilizer if it is properly decomposed. This may lead to not only dramatic cut of the treatment cost but prevention from secondary environmental contamination due to dump. The primary objective of the study was to explore the quantitative range of major enviromental parameters influencing early composting of paper-mill cakes, naturally pretreated in warn and cold weather. The automatically-controlled reactor was designed, manufactured, and operated for nine days to decompose about 2201 of raw sludge cakes. Four tests(Test 1-Test 4) were implemented for the study of Phase I. Treatments of two levels of initial temperature (40˚C and 28˚C) and two levels of water content + C/N ratio (35% + 40 and 63% + 80) were made to test the significance of their parameters for decomposition of raw sludge cakes pretreated in warm weather. Another four tests (Test 5- Test 8) were implemented for the study of Phase II. Treatments of initial temperature and water content(W/C) + C/N ratio of raw sludge pretreated in cold weather were made to 16˚C and 13% +58 for Test 5, 6˚C and 53% +55 for Test 6, 7˚C and 36% +81 for Test 7, 31˚C and 30% +81 for Test 8. Natural weater condition(pretreatment condition) revealed the importance m composting of the paper-mill sludge cakes. Combination of water content adjustment to about 30% with C/N ratio amendment of about 20 and initial temperature of 30~40˚C was concluded to be the best for early composting of paper-mill sludge cakes with aeration rate and pH fixed. Temperature and C/N ratio were adapted as judging variables for composting degree. In addition, tests for microbial activity were performed to validate the experimental results. Since the temperature and C/N ratio did not coincide in some tests as judging variables for the maturity of the composting sludges, taking one of these parameters could mislead the concept of the maturity (composting conceptually new criterion to provide more reliable information for early composting of paper-mill sludge cakes.

  • PDF

Germination Characteristics by Temperature and Production Time to Poaceae Plant Seed (녹화용 벼과식물 종자의 채종시기 및 온도별 발아특성)

  • Kang, Hee-Kyoung;Yi, Ja-Yeon;Cho, Yong-Hyeon;Song, Hong-Seon
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.19 no.2
    • /
    • pp.71-81
    • /
    • 2016
  • This text was experimented and investigated the optimum production time and germination characteristics of seed that collect in Korean Chungnam, in order to offer the basic informations for slope restoration and revegetation using Poaceae plant. Optimum time of seed production was mid-late October of Miscanthus sinensis, Pennisetum alopecuroides, early November to late October of Themeda triandra var. japonica and M. sacchariflorus, and mid November of Phragmites communis. Epiphytic amount of seed full ripe was the most times in mid October of M. sinensis, P. alopecuroides and M. sacchariflorus, early November of T. triandra var. japonica, and mid November of P. communis. Seed rate of maturity was the highest times in early November of M. sinensis, P. alopecuroides and M. sacchariflorus, and mid November of T. triandra var. japonica and P. communis. Germination rate by seed collection time was the highest times in early October of M. sacchariflorus, mid October of T. triandra var. japonica, early November of M. sinensis and mid November of P. communis. Germination days by seed production time was the shortest times in early November of M. sinensis and M. sacchariflorus, mid November of T. triandra var. japonica and P. communis. Optimum temperature of germination was $20{\sim}25^{\circ}C$ in M. sinensis and P. alopecuroides, $25^{\circ}C$ in T. triandra var. japonica, and $25{\sim}30^{\circ}C$ in P. communis.

Application of Early-maturing Corn to Cropping System of Forage Crop II. Effects of Late Sowing and Dense Planting of Early-maturing Corn on Forage Productivity (조숙 옥수수에 의한 사료작물 작부체계 구성 II. 조숙 옥수수의 사료생산성에 미치는 만파와 밀식효과)

  • 임근발;최영원;양종성;허운행
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.36 no.3
    • /
    • pp.209-213
    • /
    • 1991
  • Early maturing hybrids(Comet 80, Comet 85 and Linda) and mid-late maturing hybrid (Suwon 19) were grown at Suwon to study the influence of maturity, plant population, and sowing date (45, 55, and 65 days delayed from the recommended sowing date of Suwon 19) on the dry matter yields, percentage ears and TDN yields. Com was planted at the density of 60 x 20, 50 x 20 and 40 x 20 em. Dry matter yields were not significantly different between the early and mid-late maturing hybrids in the delayed sowing time, but significantly higher in 20 x 50cm of planting density in early maturing hybrids. As sowing was delayed to Jun. 22 ear content decreased from 40.3% (early maturing hybrid) to 6.7% (Suwon 19). This resulted in significantly 24.1% higher TDN yield in Comet 85 than in Suwon 19.

  • PDF