• 한국자동차공학회논문집
• /
• 제12권3호
• /
• pp.177-183
• /
• 2004

The out-of-positioned small female drivers are most likely to be injured during airbag deployment due to their stature and proximity to the steering wheel and airbag module. In order to investigate the injury mechanisms, some experimental studies with Hybrid III 5% female dummy and with female cadavers could be found from the open literatures. However, the given information from those experimental studies is quite limited to the standard conditions and might not be enough to estimate the airbag inflation aggressiveness regarding on the occupant responses and injury. In this study, a finite element analysis has been performed in order to investigate the airbag-induced injuries. A finite element 5% female human model in anatomical details has been developed. The validation results of the model are also introduced in this paper.

• 호남수학학술지
• /
• 제36권2호
• /
• pp.233-251
• /
• 2014

In this paper, position vector of a spacelike slant helix with respect to standard frame are deduced in Minkowski space $E^3_1$. Some new characterizations of a spacelike slant helices are presented. Also, a vector differential equation of third order is constructed to determine position vector of an arbitrary spacelike curve. In terms of solution, we determine the parametric representation of the spacelike slant helices from the intrinsic equations. Thereafter, we apply this method to find the parametric representation of some special spacelike slant helices such as: Salkowski and anti-Salkowski curves.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.340.1-340
• /
• 2002

The unbalance exciting force induced by HDD of lately getting higher speed is directly influenced by the rotational speed and the mechanical assembly allowance between disk and spindle motor, and which gives rise to the structure borne noise of the personal computer. The absolute unbalance mass of HDD needs to be measured and adjusted by the counter mass to control the unbalance exciting force effectively in the stage of assembling the disk and spindle motor. This study introduces the measurement methods of the magnitude of the absolute unbalance mass and the position of HDD by 2 accelerometers. The absolute unbalance mass can be obtained by the acceleration responses and the mobility of the mechanical part, while the position of the unbalance mass can e obtained by the rotation acceleration orbit.

• Steel and Composite Structures
• /
• 제20권5호
• /
• pp.963-981
• /
• 2016

A nonlocal trigonometric shear deformation beam theory based on neutral surface position is developed for bending, buckling, and vibration of functionally graded (FG) nanobeams using the nonlocal differential constitutive relations of Eringen. The present model is capable of capturing both small scale effect and transverse shear deformation effects of FG nanobeams, and does not require shear correction factors. The material properties of the FG nanobeam are assumed to vary in the thickness direction. The equations of motion are derived by employing Hamilton's principle, and the physical neutral surface concept. Analytical solutions are presented for a simply supported FG nanobeam, and the obtained results compare well with those predicted by the nonlocal Timoshenko beam theory.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2069-2079
• /
• 2004

This paper represents the description of a complex mathematical model of biomechanical interaction for human-rifle system during shooting. The model is developed by finite element method using bar elements. And three typical shooting positions, i.e. standing, kneeling and prone are used. Characteristics of interior/exterior ballistics and behaviors of human-rifle system are evaluated by this model, which takes into account the influence of environment, bullet, powder, barrel geometry parameters and anthropological parameters. The results of this study can be applied to anthropology, biomechanics, medical science, gait analysis, interior ballistics and exterior ballistics.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.321-324
• /
• 2004

We used BV CCD images to study the dynamical substructures of three globular clusters - M5, NGC6934, NGC7006 - analyzing the radial variations of ellipticity and position angle from the point spread function stellar photometry and the ellipse surface photometry. Several populations were classified by the brightness on color-magnitude diagrams of each globular cluster. Ellipse analyses to the images, removed stars of each population from the original images of the clusters, show radial variations in ellipticity and position angle, with the amount of $0.01\~0.25$ in ellipticity and $+90\~-90$ degrees in position angle up to roughly three times of half light radius $(r_h)$. It is also apparent that there are no significant discrepancies in the dynamical substructures beyond $r_h$ among the different populations. However, dynamical substructures on the central region (i.e., inner than $\~r_h$) reflect the contributions of populations of bright red giant stars and horizontal branch stars.

• 한국인터넷방송통신학회논문지
• /
• 제14권2호
• /
• pp.127-134
• /
• 2014

본 논문은 방향탐지용 Low-VHF 대역 소형 안테나의 탱크 장착 위치에 따른 방사특성에 관한 연구이다. 먼저, 안테나를 평면 접지면상 장착시, 다음으로 탱크 위 장착시 방사특성에 대하여 각각 시뮬레이션(40MHz)과 1/10 축소된 모델에 대하여 제작 측정(400MHz)으로 확인하였다. 평면 접지면상 장착시 급전점이 ${\phi}=0^{\circ}$, $180^{\circ}$(xz-면)에 위치할 경우, yz-면 성분(H-면)과 xz-면 $E_{\theta}$ 성분(E-면) 방사패턴이 좁은 접지면의 영향으로 상반구상 무지향성 방사 특성을 유지함을 확인 하였다. 다음으로 탱크 장착시에도 평면 접지면상 장착시 방사특성과 동일하게 상반구상에서 yz-면 $E_{\phi}$ 성분(H-면)과 xz-면 $E_{\theta}$ 성분(E-면) 방사패턴 모두 장착위치에 거의 영향이 없는 상반구상 무지향성 방사 특성을 나타내었다. 이로써, 제안된 방향탐지용 소형 안테나를 탱크에 장착 할 경우, 급전점을 접지면이 좁은 xz-면(E-면)에 위치시킨다면, 방향탐지용 안테나로써 보다 안정적인 방사특성을 유지함을 확인 할 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제28권1호
• /
• pp.46-54
• /
• 2007

Objective: The first aim of this study is to determine the effects of acupuncture on the autonomic nervous system (ANS) via Heart Rate (HR) and Pupil Size (PS), and to compare the effects of acupuncture on the subjects' ANS when they are in a sitting position with the effects when they are in a supine position. Methods: Ten healthy male subjects were randomized to receive either verum acupuncture stimulation in a sitting position (SitV), verum acupuncture stimulation in a supine position (SupV), sham acupuncture stimulation in a sitting position (SitS), and sham acupuncture stimulation in a supine position (SupS). Acupuncture stimulation was applied to Neguan point (PC6) on the forearm. The subject's electrocardiogram (ECG) and pupil size were recorded continuously from 5 min before stimulation to 12 min after stimulation. Results: Verum and sham acupuncture stimulation were found to have reduced heart rate (p<0.01) and to have increased pupil size (p<0.01) in all the subjects. But when the reduction in HR and the increment in PS after verum acupuncture stimulation (both sitting and supine position) were compared with those after sham acupuncture stimulation, it was found that the reduction in HR (74.48 and 73.47 bpm, p<0.063) and the increment of PS (7.32 and, 6.10 mm, p<0.001) after verum acupuncture stimulation were greater than those after sham acupuncture stimulation, and that the corresponding values were statistically significant. In addition, at the baseline, it was found that the subjects had a larger PS and a faster HR in a sitting position than when they did so in a supine position. And then the reduction and increment ratio in the subject's HR and PS when they underwent acupuncture stimulation in a sitting position was significantly different from the reduction and increment in their HR and PS when they underwent the procedure in a supine position-i.e., the reduction ratio in HR was greater when they underwent the procedure in a sitting position, and such reduction ratio was statistically significant (p<0.05). As for the increment in PS, it was greater when the subjects underwent the procedure in a supine position, and such increment was significant (p<0.05). Conclusion: Manual acupuncture stimulation on Neguan point (PC6) has more significant influence on the autonomic nervous system rather than sham acupuncture (tactile stimulation). And the position-induced different states of ANS have different influence on the acupuncture effect.

• 한국운동역학회지
• /
• 제15권4호
• /
• pp.43-53
• /
• 2005

This study is to define how the difference of athletic change influence on the last regrasp after somersault in Belle movement of parallel bars. For his study, the following conclusion was produced by analysis of athletic change by means of three dimensional visual image in three athlete of nation. 1. As the picture of S1, there are total used time(2.01 sec), S3(2.17 sec) and S2(2.19 sec). In case of a short needed time, it is difficult for them to perform the remaining movement of the vertical elevating flight easily and comfortably, it is judged as performing the small movement with restrict swing. 2 In the change of body center sped by each event, it is calculated as $-89.1^{\circ}$ the narrowest in S1, $-81.96^{\circ}$ the widest and then $86.34^{\circ}$ in S3. In E3 event, average compound speed is 4.07m/s, S2 showed the fastest speed of 4.14m/s whereas S1 the narrowest angle of 3.95m/s. 3. A shoulder joint and coxa are the period of mention in E3. In E4 which was pointed out the longest vertical distance, S2 that is indicated the highest vertical height as the period of detach in parallel bars. showed -3.91m. This is regarded as a preparatory movement for dynamic performance after using effectively elastic movement of shoulder joint and coxa while easily going up with turning back movement. In the 5th phrase, long airborne time and vertical change position is showed as the start while regrasping securely air flight movement from high position. 4. In E5, a long flight time and a long vertical displacement were shown as the regrasp after somersault efficiently in high position with stability from the point of the highest peak of the center of the body. Especially, S2 is marked as a little bit long position, while S1 is reversely indicated as performing somersault and unstable motion in a low position. 5. In E3, at the point of the largest extension of the shoulder joint and hip joint the shoulder joint is largely marked in $182^{\circ}$ and the hip point $182^{\circ}$ in S2. The shoulder joint is marked at the smallest angle in $177^{\circ}$ and the hip point $176^{\circ}$ in S1. And S1 is being judged by its performance of the less self - confident motion with lessening a breath of swing. S2 makes the most use of flexion and extension of the shoulder joint and the hip joint effectively. It was performed greatly with swinging and dropping the rotary movement and the rotary inertia naturally. 6. In E6, as the point of regrasp of the upper arm in parallel bars it is recognized by the that of components of vertical and horizontal velocity stably. During this study, the insufficient thing and the study on the parallel bars at a real game later are more activated than now. If it is really used as the basic materials by means of Belle Picked Study of Super E level after Bell movement, you may perceive the technique movement previously and perform without difficulty. Especially, such technique as crucifix is quite advantageous for oriental people thanks to small body shape condition. In conclusion we will nicely prepare for our suitable environment to gradually lessen trials and errors by analyzing and studying kinematically this movement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2370-2373
• /
• 2004

In this paper we describe the design of a Dual-Redundant Power Controller(DRPC) for Control Rod Control System(CRCS). The CRCS also provides information regarding rod motion, rod position, and status of the Rod Control System. It has Hot/Stand-by type, and also has the function of fault detection for controller itself and power modules. We have implemented the various functions with the dual-redundant Power Controller. Due to the developed DRPC, we are assured that the commmecial use by this controller be made before long.