• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.7-8
• /
• 2010

The surface conductive layer (SCL) of chemical vapor deposition (CVD) diamonds has attracting much interest. However, neither photoemission electron microscopic (PEEM) nor micro-spectroscopic (PEEMS) information is available so far. Since SCL retains in an ultra-high vacuum (UHV) condition, PEEM or PEEMS study will give an insight of SCL, which is the subject of the present study. The sample was made on a Ib-type HTHP diamond (001) substrate by non-doping CVD growthin a DC-plasma deposition chamber. The SCL properties of the sample in air were; a few tens K/Sq. in sheet resistance, ${\sim}180\;cm^2/vs$ in Hall mobility, ${\sim}2{\times}10^{12}/cm^2$ in carrier concentration. The root-square-mean surface roughness (Rq) of the sample was ~0.2nm as checked by AFM. A $2{\times}1$ LEED pattern and a sheet resistance of several hundreds K/Sq. in UHV were checked in a UHV chamber with an in-situ resist-meter [1]. The sample was then installed in a commercial PEEM/S apparatus (Omicron FOCUS IS-PEEM) which was composed of electro-static-lens optics together with an electron energy-analyzer. The presence of SCL was regularly monitored by measuring resistance between two electrodes (colloidal graphite) pasted on the two ends of sample surface. Figure 1 shows two PEEM images of a same area of the sample; a) is excited with a Hg-lamp and b) with a Xe-lamp. The maximum photon energy of the Hg-lamp is ~4.9 eV which is smaller that the band gap energy ($E_G=5.5\;eV$) of diamond and the maximum photon energy of the Xe-lamp is ~6.2 eV which is larger than $E_G$. The image that appear with the Hg-lamp can be due to photo-excitation to unoccupied states of the hydrogen-terminated negative electron affinity (NEA) diamond surface [2]. Secondary electron energy distribution of the white background of Figs.1a) and b) indeed shows that the whole surface is NEA except a large black dot on the upper center. However, Figs.1a) and 1b) show several features that are qualitatively different from each other. Some of the differences are the followings: the two main dark lines A and B in Fig.1b) are not at all obvious and the white lines B and C in Fig.1b) appear to be dark lines in Fig.1a). A PEEMS analysis of secondary electron energy distribution showed that all of the features A-D have negative electron affinity with marginal differences among them. These differences can be attributed to differences in the details of energy band bending underneath the surface present in SCL [3].

• Asia pacific journal of information systems
• /
• v.16 no.3
• /
• pp.159-176
• /
• 2006

Collaborative filtering is one of the popular techniques for personalized recommendation in e-commerce. In collaborative filtering, user profiles are usually managed per product category in order to reduce data sparsity. Product diversification of Internet storefronts and multiple product category sales of e-commerce portals require cross-product category usage of user profiles in order to overcome the cold start problem of collaborative filtering. In this paper, we study the feasibility of cross-product category usage of user profiles, and suggest a method to improve recommendation performance of cross-product category user profiling. First, we investigate whether user profiles on a product category can be used to recommend products in other product categories. Furthermore, a way of utilizing user profiles selectively is suggested to increase recommendation performance of cross-product category user profiling. The feasibility of cross-product category user profiling and the usefulness of the proposed method are tested with real click stream data of an Internet storefront which sells multiple product categories including books, music CDs, and DVDs. The experiment results show that user profiles on a product category can be used to recommend products in other product categories. Also, the selective usage of user profiles based on correlations between subcategories of two product categories provides better performance than the whole usage of user profiles.

• The Korean Journal of Physiology and Pharmacology
• /
• v.6 no.5
• /
• pp.261-267
• /
• 2002

The aim of the present study was to investigate the interaction of $estradiol-17{\beta}-bovine$ serum albumin $(E_2-BSA)$ and calcitropic hormones, such as parathyroid hormone, calcitonin, and vitamin D, in regulation of $Ca^{2+}$ uptake in primary cultured renal proximal tubule cells. Statistically significant increase in $Ca^{2+}$ uptake was found from 2 hours after $(E_2-BSA)\;(10^{-9}\;M)$ treatment, while $estradiol-17{\beta}\;(10^{-9}\;M)$ did not affect. Treatment of the cells with $(E_2-BSA)\;(10^{-9}\;M)$ together with parathyroid hormone (PTH) $(10^{-8}\;M),$ vitamin D $(10^{-8}\;M),$ or calcitonin $(10^{-8}\;M)$ significantly stimulated $Ca^{2+}$ uptake by 32.50%, 29.30%, or 27.75%, respectively, compared with the control. However, calcitropic hormones did not exhibit any synergistic effect on the E2-BSA-induced stimulation. $E_2-BSA$ significantly increased cAMP generation and PKC activity. The stimulatory effect of cotreatment of $E_2-BSA$ and PTH or vitamin D was blocked by SQ22536 (an adenylate cyclase inhibitor) and staurosporine (a PKC inhibitor), but the effect of cotreatment of $E_2-BSA$ and calcitonin was not blocked. Furthermore, 8-Br-cAMP and TPA (an artificial PKC promoter) increased $Ca^{2+}$ uptake by 25.51% and 16.47%, respectively, compared with the control. In conclusion, $E_2-BSA$ combined with calcitropic hormones regulated $Ca^{2+}$ uptake partially via cAMP and PKC-dependent mechanisms in renal proximal tubule cells.

• The Korean Journal of Mycology
• /
• v.5 no.1
• /
• pp.1-5
• /
• 1977

The studies were carried out to examine the influence of the quantities of the rice straw substrate and spawn on the yield in the cultivation of oyster mushroom, Pleurotus ostreatus(Fr.) Quel. using rice straw as growing substrate. The best yield of fresh sporophres was 102 kgs. when the substrate was increased by up to 90 kgs. per 3.3 sq. metre. In case of distributing the spawn over the surface, it was regularly possible to increase the yield using spawn rate of 8kgs. per 3.3 sq. metre and by increasing the ratio of spawn in the substrate, the mycelial growth also made rapid progress.

• Industrial Engineering and Management Systems
• /
• v.10 no.3
• /
• pp.185-190
• /
• 2011

A driver interacts directly with the car seat at all times. There are ergonomic characteristics that have to be followed to produce comfortable seats. However, most of previous researches focused on either static or dynamic condition only. In addition, research on car seat development is critically lacking although Malaysia herself manufactures its own car. Hence, this paper integrates objective measurements and subjective evaluation to predict seat discomfort. The objective measurements consider both static and dynamic conditions. Steven's psychophysics power law has been used in which after expansion; ${\psi}\;=\;a+b{\varphi}_s^{\alpha}+c{\varphi}_v^{\beta}$ where ${\psi}$ is discomfort sensation, ${\varphi}_s^{\alpha}$ is static modality with exponent ${\alpha}$ and ${\varphi}_v^{\beta}$ is dynamic modality with exponent ${\beta}$. The subjects in this study were local and the cars used were Malaysian made compact car. Static objective measurement was the seat pressure distribution measurement. The experiment was carried out on the driver's seat in a real car with the engine turned off. Meanwhile, the dynamic objective measurement was carried out in a moving car on real roads. During pressure distribution and vibration transmissibility experiments, subjects were requested to evaluate their discomfort levels using vehicle seat discomfort survey questionnaire together with body map diagram. From subjective evaluations, seat pressure and vibration dose values exponent for static modality ${\alpha}$ = 1.51 and exponent for dynamic modality ${\beta}$ = 1.24 were produced. The curves produced from the $E_{q.s}$ showed better $R_{-sq}$ values (99%) when both static and dynamic modalities were considered together as compared to Eq. with single modality only (static or dynamic only R-Sq = 95%). In conclusion, car seat discomfort prediction gives better result when seat development considered both static and dynamic modalities; and using ergonomic approach.

• Physical Therapy Korea
• /
• v.27 no.3
• /
• pp.212-219
• /
• 2020

Background: Although the original version of the health-related quality of life (HRQOL) questionnaires are found to be acceptable, the cross-culturally adapted versions may not be comparable to their original version. Objects: To examine dimensionality and construct validity of two Korean versions of the brief version of the World Health Organization Quality of Life (WHOQOL-BREF) and EuroQOL-5 dimension (EQ-5D) questionnaires. Methods: A total of 77 cancer survivors undergoing palliative rehabilitation programs from two rehabilitation institutes was recruited from April 16, 2018 to June 26, 2019. The WHOQOL-BREF and the EQ-5D were filled out by the various cancer survivors following a particular session of rehabilitation programs. The scores were analyzed with Winsteps Rasch analysis computer program using the rating scale model. Rasch fit statistics were used to determine the dimensionality and the item difficulty calibrations of WHOQOL-BREF and EQ-5D. Results: All items except two, negative feeling, need treatment function and pain prevent activity (mean square [MnSq] = 2.42, 1.82 and 2.51, respectively), were found to be acceptable, while two items of the EQ-5D, anxiety/depression and self-care, were misfit (infit MnSq = 1.65 and 0.38, respectively). Item difficulty calibrations of WHOQOL-BREF match person ability measures (i.e., HRQOL) fairly well. However, the person ability distribution showed obvious ceiling effects for EQ-5D. All items of EQ-5D were appeared to be less challenged in comparison with those of WHOQOL-BREF. Conclusion: Item-level analysis using the Rasch model supports the quality of culturally adapted items used to measure the HRQOL one exception; that is, whether or not to include misfit items as part of the HRQOL measurements. Additionally, cancer survivors undergoing palliative rehabilitation programs appear to have more of a tendency to view the EQ-5D items as being more challenging than the WHOQOL-BREF.

• Biomedical Science Letters
• /
• v.10 no.4
• /
• pp.375-383
• /
• 2004

It has been reported that osteoporosis induced by the deficiency of estrogens in menopause is associated with the unbalance of Ca/sup 2+/ and Pi levels. Proximal tubule is very important organ to regualte Ca/sup 2+/ and Pi level in the body. However, the effect of estrogens on Ca/sup 2+/ and Pi regulation was not elucidated. Thus, we examined the effect of 17-β estradiol (E₂) on Ca/sup 2+/ and Pi uptake in the primary cultured rabbit renal proxiaml tubule cells. In the present study, E₂(> 10/sup -9/M) decreases Ca/sup 2+/uptake and stimulates Pi uptake over 3 days. E₂-induced decrease of Ca/sup 2+/ uptake and stimulation of Pi uptake were blocked by actinomycin D (a gene transcription inhibitor), cycloheximide (a protein synthesis inhibitor). tamoxifen, and progesterone (estrogen receptor antagonists). E₂-induced decrease of Ca/sup 2+/ uptake and stimulation of Pi uptake were blocked by SQ22536 (an adenylate cyclase inhibitor), Rp-cAMP (a cAMP antagonist), and PKI (a protein kinase A inhibitor). Indeed, E₂ increased cAMP formation. In addition, E₂-induced decrease of Ca/sup 2+/ uptake and stimulation of Pi uptake were blocked by staurosporine, H-7, and bisindolylmaleimide I (protein kinase C inhibitors) and E₂ translocated PKC from cytoslic fraction to membrane fraction. In conclusion, E₂ decreased Ca/sup 2+/ uptake and stimulated Pi uptake via cAMP and PKC pathway in the PTCs.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.886-895
• /
• 1993

Experimental were conducted to obtain information on the effect of airflow rates and bed depths on the resistance of coffee cherries and coffee beans available locally (Coffea Liberica). The airflow used were in the range of 0.06 to 0.6 cu. m/s-sq.m. The moisture content of the coffee cherries ranged from 10 % to 50% (wet basis) and that of coffee beans ranged from 12% to 30% )wet basis). Two methods of filling were used i.e. loose fill and packed fill. Pressure drops across the material bed in a vertical column were measured at several depths using inclined manometer. The pressure drop increased directly with air flow rate as well as bed depths. The effects of air flowrates and moisture contents on the resistance in terms of pressure drip per unit bed depth were analysed. The pressure drop per unit depth across the material bed varied slightly due to different depth. The resistance to airflow decreased with the increase in moisture content for loose fill. However, the effect of moisture content is not apparent for packed fill.

• Communications of the Korean Mathematical Society
• /
• v.26 no.1
• /
• pp.1-12
• /
• 2011

In this paper, the connection of the inverse transversal with the adequate transversal is explored. It is proved that if S is an abundant semigroup with an adequate transversal $S^o$, then S is regular if and only if $S^o$ is an inverse semigroup. It is also shown that adequate transversals of a regular semigroup are just its inverse transversals. By means of a quasi-adequate semigroup and a right normal band, we construct an abundant semigroup containing a quasi-ideal S-adequate transversal and conversely, every such a semigroup can be constructed in this manner. It is simpler than the construction of Guo and Shum [9] through an SQ-system and the construction of El-Qallali [5] by W(E, S).

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1069-1072
• /
• 2003

Germane-sillicide phase formation on S $i_{0.25}$G $e_{0.75}$ with Ni 100$\square$, Co 10$\square$/Ni 100$\square$ and Ni 50$\square$/Co 10$\square$/Ni 50$\square$ layer was studied by sheet resistance and Field Emission Scanning Electron Microscopy(FESEM). Thermal stability of nickel germane-silicide is found to be improved by sputtering Ni/Co/Ni on the SiGe. After annealing at 600, 650, $700^{\circ}C$, 30min., the nickel germane-silicide formed by Ni 50$\square$/Co 10$\square$/Ni 50$\square$ layer achieved a sheet resistance less than 17ohms/sq.(almost the same to the value before furnace annealing for 30min.) , while the process of the other two ways result in high sheet resistance and even sheet resistance fail due to Ge segregation.ion.