• Journal of Mechanical Science and Technology
• /
• v.16 no.9
• /
• pp.1147-1155
• /
• 2002

Discharge flows from a centrifugal pump impeller with a specific speed of 150 [rpm, m$^3$/min, m] were experimentally investigated. A large axisymmetric collector instead of a volute casing was installed to obtain circumferentially uniform flow, i.e. without interaction of the impeller and the volute. The unsteady flow was measured at the impeller exit and vaneless diffuser using a hot film probe and a pressure transducer. The flow at impeller exit showed pronounced jet-wake flow patterns. The wake, which was on the suction/hub side at high flow rate, became enlarged pitchwisely on both the hub and the shroud side as the flow rate decreases. The pitchwise non-uniformity of the flow rapidly decreased along the downstream and the non-uniformity almost disappeared at radius ratio of 1.18 for medium flow rate. The mean vaneless diffuser flow was reasonably predicted using a one dimensional analysis when an empirical constant was used to specify the skin friction coefficient. The data can be used for a centrifugal pump impeller design and validation of CFD codes and flow modeling.

• Smart Structures and Systems
• /
• v.7 no.2
• /
• pp.103-116
• /
• 2011

This paper is concerned with the trajectory tracking and vibration suppression of a single-link flexible arm by using piezoelectric materials. The dynamics of a single flexible arm with PZT patches as sensor and actuator is derived using extended Hamilton's principle. Resulting equations show that the coupled beam dynamics including beam vibration and its rigid in-plane rotation takes place in two different time scales. By using singular perturbation theory, the system dynamics is divided into two subsystems. Then, a composite control scheme is elaborated that makes the orientation of the arm track a desired trajectory while suppressing its vibration. The proposed controller has two parts: one is a tracking controller designed for the slow (rigid) subsystem, and the other one is a stabilizing controller for the fast (flexible) subsystem. The outputs considered for the system are angular position of the hub and voltage of the sensor mounted on the structure. To avoid requiring further measurements of beam vibration and also angular velocity of the hub for the fast and slow control laws, respectively, two sliding mode observers for estimating the unknown states are also designed.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.1
• /
• pp.37-46
• /
• 1999

The influence of the tip clearance upon the cavitation inception were investigated by experiments for ducted rotors having different tip clearances The axial and tangential mean velocities around the ducted rotors were measured using an L.D.V. system to investigate the correlation between tip vertex cavitation inception and hub vortex cavitation. Observation results for tip vortex cavitation and hub vortex cavitation show good agreement in trend with the analysis results of velocity measurement. An optimum tip clearance for ducted rotor was selected to delay the tip vortex cavitation.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.1
• /
• pp.24-34
• /
• 2007

Closed-loop active twist control of integral helicopter rotor blades is investigated in this paper for reducing hub vibration induced in forward flight. A four-bladed fully articulated integral twist-actuated rotor system has been designed and tested successfully in wind tunnel in open-loop actuation. The integral twist deformation of the blades is generated using active fiber composite actuators embedded in the composite blade construction. An analytical framework is developed to examine integrally twisted helicopter blades and their aeroelastic behavior during different flight conditions. This aeroelastic model stems from a three-dimensional electroelastic beam formulation with geometrical-exactness, and is coupled with finite-state dynamic inflow aerodynamics. A system identification methodology that assumes a linear periodic system is adopted to estimate the harmonic transfer function of the rotor system. A vibration minimizing controller is designed based on this result, which implements a classical disturbance rejection algorithm with some modifications. Using the established analytical framework, the closed-loop controller is numerically simulated and the hub vibratory load reduction capability is demonstrated.

• International Commerce and Information Review
• /
• v.12 no.2
• /
• pp.85-107
• /
• 2010

A comprehensive electronic trade portal such as the electronic bills of lading, e-negotiations and so on, is developed by the Korea Ministry of Knowledge Economy and International Trade Association and serviced by KTNET. The portal, so called u-TradeHub, formally started to provide its services on 22nd May, 2009. If the shipper issues electronic bills of lading, the negotiating bank examines it through the established e-Nego system. However, the issuing bank overseas cannot examine the electronic bills of lading, because any interactive system does not exist. So, after the e-Nego, the electronic bills of lading gets automatically transformed into the paper-type electronic bills of lading and issuing bank examine paper B/L. In process of examining documents, the beneficiary using electronic means in letter of credit transactions may face some risks such as the corruption to the electronic bill of lading after its issuance by the carrier, the corruption after e-Nego and the corruption after the presentation to the issuing bank. In this paper, we studied the problems on corruptions to occur in the middle of the examination process of the electronic bills of lading and suggestions how to solve them are discussed.

• The Journal of Society for e-Business Studies
• /
• v.16 no.2
• /
• pp.91-109
• /
• 2011

Loyalty programs are everywhere these days, and among them, coalition programs, where a hub company makes a network of participating companies and users can collect and use points in a large number of participating shops, are in increase. There is little research on the coalition loyalty program. Using the case of OKCashbag, the first and biggest coalition loyalty program in Korea, this study examines whether success factors of single operator program are relevant to coalition programs. This paper contributes first by turning attention to an unexplored area of coalition loyalty programs. By offering an opportunity to reflect on success factors of both single operator and coalition programs, it will help practitioners in loyalty programs to develop innovative loyalty programs using increasingly sophisticated data collection capabilities of IT.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.993-1001
• /
• 2024

The TANDEM project is a European initiative funded under the EURATOM program. The project started on September 2022 and has a duration of 36 months. TANDEM stands for Small Modular ReacTor for a European sAfe aNd Decarbonized Energy Mix. Small Modular Reactors (SMRs) can be hybridized with other energy sources, storage systems and energy conversion applications to provide electricity, heat and hydrogen. Hybrid energy systems have the potential to strongly contribute to the energy decarbonization targeting carbon-neutrality in Europe by 2050. However, the integration of nuclear reactors, particularly SMRs, in hybrid energy systems, is a new R&D topic to be investigated. In this context, the TANDEM project aims to develop assessments and tools to facilitate the safe and efficient integration of SMRs into low-carbon hybrid energy systems. An open-source "TANDEM" model library of hybrid system components will be developed in Modelica language which, by coupling, will extend the capabilities of existing tools implemented in the project. The project proposes to specifically address the safety issues of SMRs related to their integration into hybrid energy systems, involving specific interactions between SMRs and the rest of the hybrid systems; new initiating events may have to be considered in the safety approach. TANDEM will study two hybrid systems covering the main trends of the European energy policy and market evolution at 2035's horizon: a district heating network and power supply in a large urban area, and an energy hub serving energy conversion systems, including hydrogen production; the energy hub is inspired from a harbor-like infrastructure. TANDEM will provide assessments on SMR safety, hybrid system operationality and techno-economics. Societal considerations will also be encased by analyzing European citizen engagement in SMR technology safety.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.8
• /
• pp.705-711
• /
• 2015

Five-Axis machines can generate undesirable defects such as the undercutting and overcutting errors that frequently occur in the three-axis machining process. It is therefore necessary to develop a program for NC-code generation, whereby the cutter posture is considered to decrease the occurrence of defects. In previous studies, the Easy-Impeller CAM(E-ICAM), an automatic CAM program used for the five-axis machining of impellers, was developed; however, when E-ICAM is used to machine an impeller, it is possible to gouge the hub and blade. Therefore, the aim of this study is the establishment of a formula for each type of endmill to minimize gouging according to the cutter posture, in consideration of several factors that affect accuracy in the machining of an impeller. This study also aimed to improve the performance and accuracy of E-ICAM in the manufacturing of impellers.

• The Journal of Information Systems
• /
• v.18 no.3
• /
• pp.47-70
• /
• 2009

Social network is one of the representative analytical method of the complexity theory and this research analyzed various and unique strategic alliance model of e-business domain using social network technique. A lot of small and medium firms of e-business field had developed many useful type of strategic alliances for the firms tried to maximize the effect of advertisement, marketing and to make up for their weak points and to compete with huge company with capital strength long before. But it is too rare to analyze the structure of the firm networks and to study the evolution and extension of business model considered the role of each company in the network. Social network analysis helps each firm's network easily visualized and completely modelized. Additionally, this paper cries to analyze the relationship between the role of hub and broke in the firm networks for strategic alliance, and financial performance. We demonstrate the firm with finer business model to the business environment can make higher financial performance. This implies that the firm that can create new finer business model, will lead the network of e-business firms and evolve the industry of e-business.

• Information Systems Review
• /
• v.5 no.2
• /
• pp.53-69
• /
• 2003

This paper tried to find how the characteristics of purchasing items would have influence on the relational e-procurement. The characteristics of purchasing items include the importance and the complexity of purchasing items. In order to define these characteristics, this paper reviewed various literatures about purchasing strategies. The empirical analysis through the multi-nominal logistic regression shows that the importance of items has influence on relational e-procurement, while the complexity of purchasing process has little influence. And also, the relational e-procurement through EDI as a long term buying relationship is being converted toward the exchange through purchasing sites.