• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.483-488
• /
• 2004

The inter-laboratory comparison test which is demanded on the authorized test of ISO/IEC 17025 is the program to guarantee the confidence of test result. This paper, as a part of the inter-laboratory comparison test between South Korea and China, is refered to the characteristic of friction coefficient of disk brake lining for rolling stock according to disk type. Brake tests were carried out under constant brake force and operating sequence by using dynamo-tester according to disk and disk lining types. To establishing the confidence of test result, we calculated A type uncertainty about friction coefficient and investigated the factors about the variation of friction coefficient.

• Proceedings of the KSR Conference
• /
• 2002.10b
• /
• pp.779-786
• /
• 2002

The Friction Brake Pad of High Speed Train is the most important parts in brake system, which is usually made of Cu-based Sintered friction material. This study has been carried out about the formulation effects of sintered friction material and made lots of sample brake pads. Then, we have done the performance test of the developed product by using full scale inertia Dynamo-meter. This performance test (braking speed 300km/h) was conducted as GEC Alsthom Standard test procedure and High Speed Brake Test (braking speed 350km/h) was done at "Poli" in Italy. The friction properties of this product was almost identical with the brake pad which is currently used to TGV. And the temperature of brake disk on braking speed 350Km/h was a little higher.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.116-117
• /
• 2013

The real time simulator for testing the high power inverter unit of a PM synchronous motor is proposed. The power converter of the real time simulator can replaces the dynamo test equipment that consists of a PMSM(PM synchronous motor) and load unit. It is verified by the simulation that the real time simulator has a similar electrical and mechanical characteristics of the PM synchronous motor.

• Journal of Power Electronics
• /
• v.12 no.6
• /
• pp.992-1002
• /
• 2012

In this paper, the series chopper based power train for electric vehicle is proposed for aiming the increase of one battery charge driving distance. Both the motor test bench based experiments and the chassis dynamo based experiments are tested and then analyzed for EV driving performance that the proposed power train with SAZZ chopper and Quasi-PAM control scheme is compared with or without the series chopper. It is confirmed through two kinds of experimental analyses that the series chopper power train for EV can be useful to extend the driving distance if the high efficiency and the low weight of chopper are satisfied.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.258-265
• /
• 2000

This study is to develop a Fe-based disc brake tinning with sponge structure for passenger car of 150km/h train and to concept design with 3 groove type for brake disc reducing hot hair-crack and certainly friction coeifficient. The developping brake linning would be to presumption of thermal stress Max.5.53k9/m0 of the 3 groove type. and It is stable friction coeifficient and wear rate on the Full Scale Brake dynamometer. So 3 groove type must be reduced to hot stress between Brake disc and Linning and Friction temperature is reduced about 20$^{\circ}C$

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.4
• /
• pp.660-666
• /
• 2002

It has many variables and factors to design the friction materials for automotive brake pads. The purpose of this study is to develop the proper method for design of low-cost and to know friction characteristics of each raw materials. For the purpose of examining the effect of each major raw materials, we used the Taguchi L9(3$^4$)orthogonal matrix and 1/5 scale dynamo machine for evaluation of the friction characteristics of composite brake pads. By adapting the Taguchi method, it is easy to investigate the influence of each component in complicated composites friction materials. After analyzing the testing results by the Taguchi method, the effect of factors and levels influenced friction behavior was studied.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.11
• /
• pp.957-965
• /
• 2013

This paper deals with analytical methods for low frequency and high frequency brake squeal noise on brake-rear caliper. In order to improve low frequency and high frequency squeal noise, we take survey caliper bracket shape parameters and housing shape parameters. Besides, using the combination of bracket and housing parameter were surveyed. Thus, using the combination of bracket Alt_05 and housing Alt_45 specifications, instability analysis and brake dynamo test were carried out. Based upon the two models, low and high frequency squeal noise of base model were improved. But, for 6.0 kHz frequency noise, which is not improved, it needs to additionally study on instability analysis and combination of the other brake components.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.55-58
• /
• 2005

During braking at a train, thermal energy is generated due to the frictions between disk and lining and wheel and shoe. In general, the braking transfers the kinetic energy into thermal energy. Therefore, the frictional characteristics are varied according to the braking force, the thermal resistance, and the thermostable, etc. Using a Dynamo testing we have studied the frictional characteristics and the thermal distribution to investigate a stable speed and to improve the testing method through comparing and analysing in the measurement of the thermocouple temperature and infrared camera.

• Journal of English Language & Literature
• /
• v.54 no.1
• /
• pp.61-76
• /
• 2008

F. Scott Fitzgerald's The Great Gatsby has been interpreted to be saturated with the lamentation over the distortion and evaporation of the American dream. The application of Friedrich Nietzsche's mythic concept of Dionysus, discussed in The Birth of Tragedy, surfaces a fresh layer of the novel, subverting the established pessimistic reading. To focus on a peripheral character, Myrtle Wilson, through Nietzsche's theory brings forth an optimistic vision of the author. A Dionysian ecstasy so powerfully overwhelms Myrtle that she perceives Tom, the very picture of corruption and crime in Fitzgerald's text, as a benefic liberator. Her impassioned perception of Tom enables her to soar over both legal or moral censorship and her realistic confinement. Myrtle's amoral passion endows her with the vital desire to live. Her Dionysian dynamo embodies the core of new version of the American dream Fitzgerald suggests as a measure to reanimate the lost generation of his nation.

• Journal of KIBIM
• /
• v.12 no.1
• /
• pp.62-71
• /
• 2022

In order to overcome the limitations of th 2D method regardless of the client's request, the application of BIM was reviewed to create hight-quality products using 3D models and various BIM information for offshore wind jacket-type structures. First, we defined the input value through analysis of the target structure and wrote an algorithm(script library) and library to complete the BIM model. Design review using geometry information based on th BIM model, usage for visualization drawings and quantity calculation were reviewed. For the purpose of initial review, only libraries with a limited number of subjects limitations on the scope of research were used. However, in the futrue, various libraries will be developed and research will be conducted to expand the scope of subjects.