• 한국자동차공학회논문집
• /
• 제14권2호
• /
• pp.107-113
• /
• 2006

The torsion beam axle type is widely used in the rear suspension for small passenger cars due to low cost, good performance, etc. To develop the torsion beam axle, it is necessary to estimate the characteristics of rear suspension from the design process. The characteristics estimation of the torsion beam axle is performed using FEM, dynamic simulation and is verified the real test. In this study, the natural frequency and roll stiffness of the torsion beam axle were measured by FEM, and the reliability of the FE model was evaluated according to the comparison of test data. This study presents a unique method for the finite element modeling and analysis of the torsion beam axle. The results of the FEA were verified using test data.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.147-150
• /
• 2005

The torsion beam axle type is widely used in the rear suspension for small passenger car because of low cost, good performance and etc. The FE and dynamic analysis using the computer are very helpful for the efficiency of the torsion beam design. First of all, the reliability on the computational model must be verified for the analysis. In this study, The FE model of the torsion beam was verified according to comparison with he test data. And after making the flexible body using the FE model, the dynamic characteristic of the tubular type torsion beam axles was compared with that of the V-beam type.

• 소성∙가공
• /
• 제15권8호
• /
• pp.591-596
• /
• 2006

Torsion testing was employed to investigate the deformation and recrystallization behavior of coarse-grained Alloy 718, and the results are compared with the compression testing results. Mechanical testing was conducted on bulk Alloy718 samples within the temperature ranges, $1000^{\circ}C{\sim}1100^{\circ}C$. The strain gradient formed in the torsion specimens resulted in a recrystallization behavior which varied along the radial direction from the center to the surface. The flow curves based on effective stress and effective strain as obtained by Fields and Backofen's isotropic deformation theory and the dynamic recrystallization within the compression tested samples and torsion tested samples are different. The different deformation and recrystallization behavior can be rationalized by the fact that the deformation in the coarse-grained torsion specimens is not uniform and thus the strain gradient within the specimens cannot be analytically predicted by FE simulation. Thus, the extent of recrystallization cannot be properly predicted by the established recrystallization equations based on compression tests.

• 한국군사과학기술학회지
• /
• 제5권3호
• /
• pp.89-97
• /
• 2002

In this study, the effect of $\alpha$-phase morphology on the dynamic deformation behavior at ultra high strain rate was investigated by EBW(Explosive Bridge Wire) test. All of tests and analyses were conducted on three typical microstructures of Ti-6Al-4V alloy, i.e. equiaxed, widmanstatten and bimodal microstructures. The spall strength and HEL(Hugoniot Elastic Limit) of the specimens that have the thickness of 2mm and 4mm were highest with the bimodal microstructure. These results were similar with previous study which was performed by dynamic torsion test(Kolsky torsion test).

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.435-438
• /
• 2008

High temperature deformation of Ti-6Al-4V alloy with a lamellar colony microstructure was investigated by hot compression and torsion tests. The torsion and compression tests were carried out under a wide range of temperatures and strain rates with true strain up to 2 and 0.7, respectively. The processing maps were generated on the basis of compression and torsion test data and using the principles of dynamic materials modeling (DMM). The shapes of the strain-stress curves in alpha-beta region and processing maps obtained on the two different tests have been compared with a view to evaluate the effect of the microstructure evolution on the flow softening behavior of Ti-6Al-4V alloy with a lamellar colony microstructure.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.277-280
• /
• 2001

The effects of a -phase morphology on the static and dynamic deformation behavior of a Ti-6Al-4V alloy was investigated in this study. Static tension test, static and dynamic tension test and hot compression test were conducted on three microstructures of Ti-6Al-4V alloy, i.e., equiaxed, widmanstatten and bimodal microstructures. Fracture surfaces of all three microstructures represented ductile fracture appearance, though the formation of adiabatic shear bands was noticed at dynamic torsion test. The susceptibility of forming adiabatic shear bands was greatest in the equiaxed microsoucture and lowest in the bimodal microstructure, which was evidenced by hot compression test.

• 항공우주시스템공학회지
• /
• 제12권2호
• /
• pp.30-36
• /
• 2018

본 연구에서는 무인복합형 회전익기 연구의 일환으로 축소형 Tip Jet 로터 시험장치를 개발하였으며, 이를 이용하여 Tip Jet 로터에 대한 성능 및 동특성 연구를 수행하였다. 축소로터는 시험장 여건 및 공압조건 등을 고려하여 2m급이 되도록 하였으며, 압축공기를 이용하여 구동된다. 축소로터의 회전속도는 압축공기의 압력을 이용하여 조절되며, 별도의 하중측정부를 두어 회전 시 발생하는 추력과 각 방향의 하중 데이터를 획득하게 된다. 동특성 시험을 위해 별도의 유압 가진기가 장착되어 있으며, 로터 가진 시 발생하는 블레이드의 flap, lag 및 torsion 방향에 대한 동적 응답을 확인하기 위해, 각 블레이드의 익근부에는 full-bridge strain gage를 부착하였다. 성능 및 동특성 시험은 로터 회전수 및 블레이드 피치각을 변경해가며 실시되었다. 아울러 시험 결과의 유효성을 확인하기 위해 CAMRAD II 해석 결과와 비교하였다.

• 소성∙가공
• /
• 제4권2호
• /
• pp.159-168
• /
• 1995

The torsion tests in the range of $550~800^{\circ}C$, $5.0{\times}10^{-3}~5.0{\times}10^0/sec$ were performed to study the effects of strain rate$(\.{\varepsilon})$ and temperature(T) on the hot strength of Cu-Zn alloy. High temperature flow stresses of this alloy increased with increasing $\.{\varepsilon}$ and/or decreasing T, and than the more grain refinement could be obtained. The flow curves exhibited a peak followed by a steady steady state regime as a result of dynamic recrystallization. The hot strength dependence of $\.{\varepsilon}$ and T was described by a hyperbolic sine law, $\.{\varepsilon}=A(sinh0.017{\sigma})^4.81$exp(-216KJ/mol). Hot strength could be reduced at the arbitary condition, $\.{\varepsilon}$ and T, by constitutive parameter Z(Zenner-Hollomon parameter), $Z=A(sinh{\alpha}{\sigma})^n=\.{\varepsilon}$exp(Q/RT).

• 대한기계학회논문집A
• /
• 제36권9호
• /
• pp.979-984
• /
• 2012

Antiroll-bar Assembly는 철도 차량의 롤링을 제어하도록 설계된 정밀 부품이고 안전과 편안한 승차감을 위해 중요하다. Antiroll-bar Assembly의 주부품인 토션바는 소모품으로써 프랑스에서 전량 수입되고 있다. 따라서 비용절감과 성능향상을 위해 국내 환경에 적합한 토션바 국산화 개발이 필요하다. 본 연구에서는 국내 철도에서 측정된 로드 히스토그램을 활용하여 개발된 토션바에 대한 해석 및 시험을 진행하였고, 수입품과의 비교 시험 결과 만족할만한 결과를 얻었다. 또한 토션바의 부식현상을 방지하기 위해서 스테인리스강 소재의 Ring cover를 씌울 수 있도록 설계를 변경하였다. 변경된 설계 안전성은 CAE해석과 마모시험을 통해서 검증하였다. 이 결과 설계변경에 의한 정적 및 피로에 대한 안전성은 큰 차이가 없었다. 그리고 2종류의 스테인리스강 중에서 내마모성이 우수한 소재를 채택하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.140-143
• /
• 2003

Recently, many high-rise reinforced concrete (RC) bearing wall structures of multiple occupancy have been constructed, which have the irregularities of weak (or soft) story and torsion at the lower stories simultaneously. The study compared the eccentricity of such a building predicted by design codes, EC 8, IBC 2000 and UBC 97, and by the test results through a series of shaking table tests of 1:12 model. Based on the comparison of the predicted eccentricity and the test result, the conclusions are drawn as follow: Accidental torsion due to the uncertainty on the properties of structure can be reasonably predicted by using the dynamic analysis with the center of mass being shifted by 5 percent of the dimension of the building perpendicular to the direction of the excitations than by using equivalent lateral force procedure