• 제목/요약/키워드: dynamic tip load

검색결과 81건 처리시간 0.02초

변단면 Beck 기둥의 동적안정 해석 (Dynamic Stability Analysis of Tapered Beck Columns)

  • 이병구;이태은;강희종;김권식
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2006년도 정기 학술대회 논문집
    • /
    • pp.949-954
    • /
    • 2006
  • The purpose of this paper is to investigate the stability of tapered columns with clamped one end and carrying a tip mass of rotatory inertia with translational elastic support at the other end. The linearly tapered columns with the solid rectangular cross-section is adopted as the column taper. The differential equation governing free vibrations of such Beck columns is derived using the Bernoulli-Euler beam theory. Both the divergence and flutter critical loads are calculated from the load-frequency curves which are obtained by solving the differential equation. The critical loads are presented as functions of various non-dimensional system parameters: the taper type, the subtangential parameter, mass ratio and spring stiffness.

  • PDF

Flutter study of flapwise bend-twist coupled composite wind turbine blades

  • Farsadi, Touraj;Kayran, Altan
    • Wind and Structures
    • /
    • 제32권3호
    • /
    • pp.267-281
    • /
    • 2021
  • Bending-twisting coupling induced in big composite wind turbine blades is one of the passive control mechanisms which is exploited to mitigate loads incurred due to deformation of the blades. In the present study, flutter characteristics of bend-twist coupled blades, designed for load alleviation in wind turbine systems, are investigated by time-domain analysis. For this purpose, a baseline full GFRP blade, a bend-twist coupled full GFRP blade, and a hybrid GFRP and CFRP bend-twist coupled blade is designed for load reduction purpose for a 5 MW wind turbine model that is set up in the wind turbine multi-body dynamic code PHATAS. For the study of flutter characteristics of the blades, an over-speed analysis of the wind turbine system is performed without using any blade control and applying slowly increasing wind velocity. A detailed procedure of obtaining the flutter wind and rotational speeds from the time responses of the rotational speed of the rotor, flapwise and torsional deformation of the blade tip, and angle of attack and lift coefficient of the tip section of the blade is explained. Results show that flutter wind and rotational speeds of bend-twist coupled blades are lower than the flutter wind and rotational speeds of the baseline blade mainly due to the kinematic coupling between the bending and torsional deformation in bend-twist coupled blades.

시간적분형 운동방정식을 바탕으로 한 동적 응력확대계수의 계산 (Numerical Computation of Dynamic Stress Intensity Factors Based on the Equations of Motion in Convolution Integral)

  • 심우진;이성희
    • 대한기계학회논문집A
    • /
    • 제26권5호
    • /
    • pp.904-913
    • /
    • 2002
  • In this paper, the dynamic stress intensity factors of fracture mechanics are numerically computed in time domain using the FEM. For which the finite element formulations are derived applying the Galerkin method to the equations of motion in convolution integral as has been presented in the previous paper. To assure the strain fields of r$^{-1}$ 2/ singularity near the crack tip, the triangular quarter-point singular elements are imbedded in the finite element mesh discretized by the isoparametric quadratic quadrilateral elements. Two-dimensional problems of the elastodynamic fracture mechanics under the impact load are solved and compared with the existing numerical and analytical solutions, being shown that numerical results of good accuracy are obtained by the presented method.

Cohesive modeling of dynamic fracture in reinforced concrete

  • Yu, Rena C.;Zhang, Xiaoxin;Ruiz, Gonzalo
    • Computers and Concrete
    • /
    • 제5권4호
    • /
    • pp.389-400
    • /
    • 2008
  • In this work we simulate explicitly the dynamic fracture propagation in reinforced concrete beams. In particular, adopting cohesive theories of fracture with the direct simulation of fracture and fragmentation, we represent the concrete matrix, the steel re-bars and the interface between the two materials explicitly. Therefore the crack nucleation within the concrete matrix, through and along the re-bars, the deterioration of the concrete-steel interface are modeled explicitly. The numerical simulations are validated against experiments of three-point-bend beams loaded dynamically under various strain rates. By extracting the crack-tip positions and the crack mouth opening displacement history, a two-stage crack propagation, marked by the attainment of the peak load, is observed. The first stage corresponds to the stable crack advance, the second one, the unstable collapse of the beam.

On the large plastic deformation of tubular beams under impact loading

  • Wang, B.
    • Structural Engineering and Mechanics
    • /
    • 제3권5호
    • /
    • pp.463-474
    • /
    • 1995
  • When a tubular cantilever beam is loaded by a dynamic force applied transversely at its tip, the strain hardening of the material tends to increase the load carrying capacity and local buckling and cross-sectional overlization occurring in the tube section tends to reduce the moment carrying capacity and results in structural softening. A theoretical model is presented in this paper to analyze the deformation of a tubular beam in a dynamic response mode. Based on a large deflection analysis, the hardening/softening M-${\kappa}$ relationship is introduced. The main interest is on the curvature development history and the deformed configuration of the beam.

Structural Optimization of Cantilever Beam in Conjunction with Dynamic Analysis

  • Zai, Behzad Ahmed;Park, M.K.;Lim, Seung-Chul;Lee, Joong-Won;Sindhu, Rashid Ali
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2008년도 정기 학술대회
    • /
    • pp.397-401
    • /
    • 2008
  • Knowledge of dynamic characteristics of structural elements often can make difference between success and failure in the design of structure due to resonance effect. In this paper an analytical model of a cantilever beam having midpoint load is considered for structural optimization. This involves creating the geometry which allows parametric study of all design variables. For that purpose optimization of cantilever beam is elaborated in order to find the optimum geometry which minimizes its volume eventually for minimum weight using ANSYS. But such geometry could be obtained by different combinations of width and height, so that it may have the same cross sectional area yet different dynamic behavior. So for optimum safe design, besides minimum volume it should have minimum vibration as well. In order to predict vibration different dynamic analyses are performed simultaneously to solve the eigenvalues problem assuming no damping initially through MATLAB simulations using state space form for modal analysis, which identifies the resonant frequencies and mode shapes belonging to the lowest three modes of vibration. And next by introducing damping effects tip displacement, bending stress and the vertical reaction force at the fixed end is evaluated under some dynamic load of varying frequency, and finally it is discussed how resonance can be avoided for particular design. Investigation of results clearly shows that only structural analysis is not enough to predict the optimum values of dimension for safe design. Potentially this technique will meet maintenance and cost goals of many organizations particularly for the application where dynamic loading is invertible and helps a lot ensuring that the proposed design will be safe for both static and dynamic conditions.

  • PDF

동적하중(動的荷重)을 받는 콘크리트의 구열(龜裂)성장 (Propagation of Crack in Concrete Subjected to Dynamic Loading)

  • 강성후;김우
    • 대한토목학회논문집
    • /
    • 제8권2호
    • /
    • pp.135-145
    • /
    • 1988
  • 본(本) 연구(硏究)는 재료(材料)의 배합(配合)이 단순한 mortar를 제작 그 균열발생을 관찰, 측정하여 정적하중(靜的荷重)에 의한 균열 및 일정진폭을 갖는 동적하중(動的荷重)에 의한 균열성장영역 예측을 시도한 것이다. 사용시편은 mortar의 배합비(配合比)와 물-시멘트비(比)를 달리하여 ASTM E 561-80에서 제안한 CLWL-DCB(crack-line-loaded-double-cantilever-beam)의 제1방법인 벽개형(劈開型)모드(opening mode)에 의거 균열성장거동을 측정하였다. 본(本) 실험(實驗)에서는 X-Y recorder에 나타난 하중(荷重)(P)-균열개구변위($2V_1$), 균열개구변위($2V_1$)-균열선단개구변위($2V_2$)의 diagram을 해석하여 정적하중(靜的荷重)에 의한 균열선단의 비선형적인 미소균열을 포함하는 유효균열길이(effective crack length; $a_e$)와 균열선단의 미소균열을 제외한 물리적균열길이(physical crack length; $a_m$) 및 replica 필름으로 구한 균열길이(replica crack length; $a_t$)의 상관관계와 일정진폭을 갖는 반복하중에 의한 $a_e$, $a_m$, $a_t$를 구하여 정적하중(靜的荷重)에 의한 균열특성과 동적하중(動的荷重)에 의한 균열특성을 조사한 것이다.

  • PDF

Structural Optimization of Cantilever Beam in Conjunction with Dynamic Analysis

  • Zai, Behzad Ahmed;Ahmad, Furqan;Lee, Chang-Yeol;Kim, Tae-Ok;Park, Myung-Kyun
    • 한국가스학회지
    • /
    • 제15권5호
    • /
    • pp.31-36
    • /
    • 2011
  • In this paper, an analytical model of a cantilever beam having a midpoint load is considered for structural optimization and design. This involves creation of the geometry through a parametric study of all design variables. For this purpose, the optimization of the cantilever beam was elaborated in order to find the optimum geometry which minimizes its volume eventually for minimum weight by FEM (finite element method) analysis. Such geometry can be obtained by different combinations of width and height, so that the beam may have the same cross-sectional area, yet different dynamic behavior. So for optimum safe design, besides minimum volume it should have minimum vibration as well. In order to predict vibration, different dynamic analyses were performed simultaneously to identify the resonant frequencies and mode shapes belonging to the lowest three modes of vibration. Next, by introducing damping effects, the tip displacement and bending stress at the fixed end was evaluated under dynamic loads of varying frequency. Investigation of the results clearly shows that only structural analysis is not enough to predict the optimum values of dimension for safe design it must be aided by dynamic analysis as well.

DVE에서 시간 기반 균등 부하 분산 방식 설계 (Design the Time-Interval Based Fairness Partitioning Method in DVE)

  • 원동기;안동언;정성종
    • 전자공학회논문지CI
    • /
    • 제45권1호
    • /
    • pp.48-54
    • /
    • 2008
  • MMORPG 게임 에서는 많은 사용자들이 다수의 서버를 통해 관리 된다. 이러한 환경에서 사용자 수는 몇 명에서 몇 천명에 달할 수 있고 사용자들은 같은 가상 세계에서 서로의 정보를 주고받는 과정에서 여러 가지 문제들, 서버와의 연결 지연이나 끊김 현상 등이 발생 할 수 있다. 이러한 문제는 사용자들이 게임을 즐기는데 있어서 큰 방해가 되며 위와 같은 문제로 인한 명령어 전달이나 메시지 전달이 늦게 되면 사용자는 가상 세계에서 불이익을 받을 수 있다. 많은 정책들이 이와 같은 문제들을 해결하기 위해 자원 여유에 따른 등급에 따라 서버들에 사용자를 배분 하고 있지만 불행히도, 최적의 환경으로 사용자를 서버에 배분 하였다 하더라도 급변하는 서버와 네트워크의 상태 변화로 인해 시간이 지남에 따라 차선책이 되고 만다. 그로 인해 MMORPG 환경에서 원활한 서버 자원 관리가 힘들어 진다. 이러한 문제들을 해결하기 위해 시간 기반의 균등 분할 방법(TIP)를 제안한다. TIP는 게임 유저들을 게임 서버들에 특정 시간마다 균등하게 분할하여 부하 불균형으로 인한 문제점을 해결할 것이다.

PRD 공법을 이용한 매입말뚝의 지지력 특성 (Bearing Capacity Characteristics of Drilled Shafts using Percussion Rotary Drilling)

  • 윤형준;정국상;정상섬
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.307-314
    • /
    • 2001
  • The bearing capacity of drilled shafts that take excavation by Percussion Rrotary Drilling(PRD) into consideration was evaluated using static and dynamic pile load tests. The emphasis was on quantifying the allowable bearing capacity and point load-transfer at the pile tip on seven instrumented steel piles. Of the seven instrumented piles, five piles are placed to the bottom of the excavation by rotary and pushing into the final depth of the excavation, as opposed to the two driven piles. Based on the results obtained, it is shown that the skin friction mobilized by PRD is much greater than point resistance, whereas in driven piles, the point resistance is greater than skin friction. It is also found that much greater pile capacity was proved in the case of drilled shafts, compared to the driven piles and thus, the excavation by rotary drilling gives reliable pile capacity required to design axially loaded piles.

  • PDF