• Structural Engineering and Mechanics
• /
• 제74권2호
• /
• pp.157-173
• /
• 2020

In the finite element modelling of long-span cable-stayed bridges, there are a lot of uncertainties brought about by the complex structural configuration, material behaviour, boundary conditions, structural connections, etc. In order to reduce the discrepancies between the theoretical finite element model and the actual static and dynamic behaviour, updating is indispensable after establishment of the finite element model to provide a reliable baseline version for further analysis. Traditional sensitivity-based updating methods cannot support updating based on static and dynamic measurement data at the same time. The finite element model is required in every optimization iteration which limits the efficiency greatly. A convenient but accurate Kriging surrogate model for updating of the finite element model of cable-stayed bridge is proposed. First, a simple cable-stayed bridge is used to verify the method and the updating results of Kriging model are compared with those using the response surface model. Results show that Kriging model has higher accuracy than the response surface model. Then the method is utilized to update the model of a long-span cable-stayed bridge in Hong Kong. The natural frequencies are extracted using various methods from the ambient data collected by the Wind and Structural Health Monitoring System installed on the bridge. The maximum deflection records at two specific locations in the load test form the updating objective function. Finally, the fatigue lives of the structure at two cross sections are calculated with the finite element models before and after updating considering the mean stress effect. Results are compared with those calculated from the strain gauge data for verification.

• 방송공학회논문지
• /
• 제24권4호
• /
• pp.660-669
• /
• 2019

최근 3차원 스캐닝 장비 및 다차원 어레이 카메라의 발달로 AR(Augmented Reality)/VR(Virtual Reality), 자율 주행과 같은 응용분야에서 3차원 데이터를 다루는 기술에 관한 연구가 지속해서 이루어지고 있다. 특히, AR/VR 분야에서는 3차원 영상을 포인트 데이터로 표현하는 콘텐츠가 등장하였으나, 이는 기존의 2차원 영상보다 많은 양의 데이터가 필요하다. 따라서 3차원 포인트 클라우드 콘텐츠를 사용자에게 서비스하기 위해서는 고효율의 부호화/복호화와 저장 및 전송과 같은 다양한 기술 개발이 요구된다. 본 논문에서는 MPEG-I(MPEG-Immersive) V-PCC(Video based Point Cloud Compression) 그룹에서 제안한 V-PCC 부호화기를 통해 생성된 V-PCC 비트스트림을 MPEG-DASH(Dynamic Adaptive Streaming over HTTP) 표준에서 정의한 세그먼트로 구성하는 방안을 제안한다. 또한, 사용자에게 3차원 좌표계 정보를 제공하기 위해 시그널링 메시지에 깊이 정보 파라미터를 추가로 정의한다. 그리고 본 논문에서 제안된 기술을 검증하기 위한 검증 플랫폼을 설계하고, 제안한 기술의 알고리듬 측면에서 확인한다.

• Structural Engineering and Mechanics
• /
• 제30권1호
• /
• pp.1-20
• /
• 2008

The dynamic characteristics of the passive, semi-active, and active tuned-liquidcolumn dampers (or TLCDs) are studied in this paper. The design of the latter two are based on the first one. A water-head difference (or simply named as water head in this paper) of a passive TLCD is pre-set to form the so-called semi-active one in this paper. The pre-set of water head is released at a proper time instant during an earthquake excitation in order to enhance the vibration reduction of a structure. Two propellers are installed along a shaft inside and at the center of a passive TLCD to form an active one. These two propellers are driven by a servo-motor controlled by a computer to provide the control force. The seismic responses of a five-story shear building with a passive, semiactive, and active TLCDs are computed for demonstration and discussion. The responses of this building with a tuned mass damper (or TMD) are also included for comparison. The small-scale shaking-table experiments of a pendulum-like system with a passive or active TLCD to harmonic and seismic excitations are conducted for verification.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2013년도 제48차 하계학술발표논문집 21권2호
• /
• pp.11-13
• /
• 2013

무선 센서 네트워크는 개방된 환경에서 무작위로 배치되어 악의적인 공격자들에게 쉽게 노출된다. 센서 노드는 한정된 에너지 자원과 손쉽게 훼손된다는 단점을 통해 허위 보고서와 투표 삽입 공격이 발생한다. Li와 Wu는 두 공격을 대응하기 위해 확률적 투표기반 여과기법을 제안하였다. 확률적 투표기반 여과기법은 고정적인 검증 경로를 결정하기 때문에 특정 노드의 에너지 자원고갈 위험이 있다. 본 논문에서는 센서 네트워크에서 보고서 여과 확률 향상을 위하여 퍼지 시스템을 기반으로 다음 노드 선택을 약 6% 효율적인 경로 선택 방법을 제안한다. 제안 기법은 전달 경로 상의 노드 중 상태정보가 높은 노드를 검증 노드로 선택하고, 선택된 검증 노드는 허용 범위 경계 값을 기준으로 공격 유형을 판별하고 여과한다. 실험결과를 통해 제안기법은 기존기법과 비교하였을 때 에너지 효율이 향상되었다.

• 한국유체기계학회 논문집
• /
• 제14권2호
• /
• pp.52-58
• /
• 2011

In this study, the design and verification of 6 kW class lift-type vertical-axis wind turbine (VAWT) has been conducted using advanced CAE technique based on computational fluid dynamics (CFD), finite element method (FEM), and computational structural dynamics (CSD). Designed aerodynamic performance of the VAWT model is tested using unsteady CFD method. Designed structural safety is also tested through the evaluation of maximum induced stress level and resonance characteristics using FEM and CSD methods. It is importantly shown that the effect of master eccentricity due to rotational inertia needs to be carefully considered to additionally investigate dynamic stress and deformation level of the designed VAWT system.

• 대한기계학회논문집A
• /
• 제21권5호
• /
• pp.746-755
• /
• 1997

This paper addresses the systematic procedure using sequential approach for the analysis of the coupled thermo-mechanical behavior of a steady rolling tire. Not only the knowledge of mechanical stresses but also of the temperature loading in a rolling tire are very important because material damage and material properties are significantly affected by the temperature. In general, the thermo-mechanical behavior of a pneumatic tire is highly complex transient phenomenon that requires the solution of a dynamic nonlinear coupled themoviscoelasticity problem with heat source resulting from internal dissipation and friction. In this paper, a sequential approach, with effective calculation schemes, to modeling this system is presented in order to predict the temperature distribution with reasonable sccuracies in a steady state rolling tire. This approach has the three major analysis modules-deformation, dissipation, and thermal modules. In the dissipation module, an analytic method for the calculation of the heat source in a rolling tire is established using viscoelastic theory. For the verification of the calculated temperature profiles and rolling resistance at different velocities, they were compared with the measured ones.

• 대한기계학회논문집
• /
• 제16권11호
• /
• pp.2049-2058
• /
• 1992

본 연구에서는 OHC형 캠-밸브 기구의 6자유도 집중 질량계 모델을 기본으로 하고, 밸브변위와 선회종동자(oscillating-follower or finger-follower)의 동적 스트 레인을 측정하여 모델의 타당성을 검증하고, 또 최적화 기법을 도입하여 밸브 개폐시 기, 밸브변위 그리고 최소 접촉력 등을 구속조건으로 주고 캠과 종동자 사이의 최대 접촉력을 최소화 시키도록 최적 캠 형상을 설계하였다. 그리고 설계된 캠을 정밀 가 공하여 최적화 설계의 타당성 및 접촉력을 실험을 통하여 검증하였다.

• 한국소음진동공학회논문집
• /
• 제18권8호
• /
• pp.816-822
• /
• 2008

This study presents the design modification for SCR muffler of a commercial vehicle. Its main objective is the reduction of radiated noise at SCR muffler. For this study, the research of five steps were achieved by experimental and CAE analysis. First step is the measurement of radiated noise using impact-acoustic test. Second step is the source identification using experimental modal analysis. The cause of radiated noise source is confirmed by the resonance of end plates at SCR muffler. Third step confirms the possibility of resonance avoidance using SDM analysis applied the mass control. Fourth step is the suggestion of design modification which is the change of mode shape by CAE analysis. Last step is the verification of design modification using SYSNOISE analysis. Finally, the prototype product applied the countermeasure of resonance evasion was manufactured and the reduction of radiated noise at SCR muffler was confirmed by pass-by noise test.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권8호
• /
• pp.3420-3436
• /
• 2020

Due to the increasing number of malicious software (also known as malware), methods for sharing threat information are being studied by various organizations. The Malware Attribute Enumeration and Characterization (MAEC) format of malware is created by analysts, converted to Structured Threat Information Expression (STIX), and distributed by using Trusted Automated eXchange of Indicator Information (TAXII) protocol. Currently, when sharing malware analysis results, analysts have to manually input them into MAEC. Not many analysis results are shared publicly. In this paper, we propose an automated MAEC conversion technique for sharing analysis results of malicious Android applications. Upon continuous research and study of various static and dynamic analysis techniques of Android Applications, we developed a conversion tool by classifying parts that can be converted automatically through MAEC standard analysis, and parts that can be entered manually by analysts. Also using MAEC-to-STIX conversion, we have discovered that the MAEC file can be converted into STIX. Although other researches have been conducted on automatic conversion techniques of MAEC, they were limited to Windows and Linux only. In further verification of the conversion rate, we confirmed that analysts could improve the efficiency of analysis and establish a faster sharing system to cope with various Android malware using our proposed technique.

• Smart Structures and Systems
• /
• 제14권4호
• /
• pp.569-594
• /
• 2014

Damage detection methods based on modal analysis have been widely studied in recent years. However the calculation of mode shapes in real structures can be time consuming and often requires dedicated software programmes. In the present paper the combined application of proper orthogonal decomposition and gapped smoothing method to structural damage detection is presented. The first is used to calculate the dynamic shapes of a damaged structural element using only the time response of the system while the second is used to derive a reference baseline to which compare the data coming from the damaged structure. Experimental verification is provided for a beam case while numerical analyses are conducted on plates. The introduction of a stiffener on a plate is investigated and a method to distinguish its influence from that of a defect is presented. Results highlight that the derivatives of the proper orthogonal modes are more effective damage indices than the modes themselves and that they can be used in damage detection when only data from the damaged structure are available. Furthermore the stiffened plate case shows how the simple use of the curvature is not sufficient when analysing complex components. The combined application of the two techniques provides a possible improvement in damage detection of typical aeronautical structures.