• 전자공학회논문지
• /
• 제53권7호
• /
• pp.56-63
• /
• 2016

본 논문에서는 멤브레인 방식 키보드에서 고스트-키를 검출하는 새로운 방법을 제시하였다. 멤브레인 필름에 저항성 도체를 추가로 코팅하는 하드웨어적인 변경을 제시하고, 이때 발생하는 정상-키와 고스트-키에 대한 최적의 검출 저항비에 관해 이론적으로 분석하였다. 저항비는 검출전압 차가 가장 작은 최악의 키 조합에 최적인 비율을 적용하며, 시뮬레이션에 의해 다른 키 조합에 대해서도 이 비율을 적용해 고스트-키를 검출할 수 있음을 보였다. 제시한 방법의 타당성을 입증하기 위해 실험 회로를 구성하고 마이크로프로세서의 아날로그-디지털 변환기를 이용해 전압을 추출하였으며, 그 결과에 따르면 정상-키와 고스트-키 사이에 뚜렷한 전압차가 발생해 멤브레인 방식 키보드에서 발생하는 고스트-키를 확실하게 검출할 수 있음을 확인하였다.

• 펄프종이기술
• /
• 제46권4호
• /
• pp.28-36
• /
• 2014

We studied the green synthesis and antibacterial activity of paper coated with chitosan-silver (Ag) green nanocomposites for packaging applications. Green synthesis of Ag nanoparticles (AgNPs) was achieved by a chemical reaction involving a mixture of chitosan-silver nitrate ($AgNO_3$) in an autoclave at 15 psi, $121^{\circ}C$, for 30 min. AgNPs and their formation in chitosan was confirmed by UV-Vis spectroscopy, transmission electron microscopy (TEM) and dynamic light scattering (DLS). As-prepared chitosan-AgNPs composite materials were coated on manila paper using Meyer rod. Surface morphology and Ag contents in coating layer were characterized by field emission scanning electron microscopy (FESEM) and energy dispersive spectroscopy (EDS). The mechanical properties such as tensile strength and elongation were significantly affected by coating with chitosan-AgNPs. The antibacterial test of coated paper was performed qualitatively and quantitatively against Escherichia coli (E. coli). It was shown to be effective in suppressing the growth of E. coli with increasing Ag contents on the surface of coated paper and more than 95 R (%) of antimicrobial rate was obtained at chitosan-AgNPs coated papers.

• Korea-Australia Rheology Journal
• /
• 제17권1호
• /
• pp.1-7
• /
• 2005

Acrylonitrile-Butadiene-Styrene (ABS), polycarbonate (PC) and their alloys are an important class of engineering thermoplastics that are widely used for automotive industry, computer and equipment housings. For the process of recycling mixtures of ABS and PC, it is desirable to know how sensitive the blend properties are to changes in compositions. It was for this reason that blends of virgin ABS and virgin PC at five different compositions, namely, $15\%,\;30\%,\;50\%,\;70%$ and $85\%$ by weight of ABS were prepared and characterised by rheological and mechanical measurements. Rheological properties of these blends in steady, oscillatory and transient step shear and mechanical properties, namely, tensile strength, elongation-at-break and Izod impact strength are reported. The results show that PC behaves in a relatively Newtonian manner, but ABS exhibits significant shear thinning. The ABS-rich blends show a trend that is similar to that of ABS, while PC-rich blends, namely $0\%$ and $15\%$, exhibit a nearly Newtonian behaviour. However, at a fixed shear rate or frequency, the steady shear or the dynamic viscosity varied respectively in a non-mono-tonic manner with composition. Except for $15\%$ blend, the viscosities of other blends fall into a narrow band indicating a wide-operation window of varying blend ratio. The blends exhibited a lower viscosity than either of the two pure components. The other noticeable feature was that the blends at $70\%$ and $85\%$ ABS content had a higher G' than pure ABS, indicating an enhancement of elastic effect. The tensile yield strength of the blends followed the 'rule of mixtures' showing a decreasing value with the increase of ABS content in PC. However, the elongation-at-break and the impact strength did not appear to obey this 'rule of mixtures,' which suggests that morphology of the blends also plays a significant role in determining the properties. Indeed, scanning electron micrographs of the fracture surfaces of the different blends validate this hypothesis, and the $15\%$ blend is seen to have the most distinct morphology and correspondingly different behaviour and properties.

• Korea-Australia Rheology Journal
• /
• 제17권1호
• /
• pp.21-25
• /
• 2005

Rheological properties and crystallization kinetics of the polypropylene (PP) block copolymer and recycled PP block copolymer were studied by advanced rheometric expansion system (ARES), differential scanning calorimetry (DSC), and optical microscopy. In the study of the dynamic rheology, it is observed that the storage modulus and loss modulus for the PP block copolymer and recycled PP block copolymer did not change with frequency. In the study of the effect of the repeated extrusion on the crystallization rate, half crystallization time of the PP samples was increased with the number of repeated extrusion in isothermal crystallization temperature ($T_c$). From the isothermal crystallization kinetics study, the crystallization rate was decreased with the increase of the number of repeated extrusion. Also, from the result of Avrami plot, the overall crystallization rate constant (K) was decreased with the increase of the number of the repeated extrusion. From the study of the optical microscopy, the size of the spherulite of the PP samples did not change significantly with the number of repeated extrusion. However, it was clearly observed that the number of the spherulite growth sites was decreased with the number of repeated extrusion. From the results of the crystallization rate, isothermal crystallization kinetics, Avrami plots, and optical microscopy, it is suggested that the crystallization rate of the PP block copolymer is decreased with the increase of the number of repeated extrusion.

• 대한치과보철학회지
• /
• 제31권4호
• /
• pp.482-505
• /
• 1993

The purpose of this study was to evaluate the fracture characteristics and the effect of resin bonding of laminate porcelain. In order to characterize the indentation-induced crack, Young's moduli and characteristic indentation dimensions were measured. The fatigue life under three point flexure test was measured using the electro-dynamic type fatigue machine, and the crack propagation with thermocycling was investigated on the condition of 15 second dwell time each in $5^{\circ}C\;and\;55^{\circ}C$ bath. The Vickers indentation pattern and the fracture surface were examined by an optical microscope and a scanning electron microscope (SEM). The results obtained were summarized as follows ; 1. Young's moduli(E) of the laminate porcelain and the resin cement used in this experiment were $62.56{\pm}3.79GPa$ and $15.01{\pm}0.12GPa$, respectively. 2. The initial crack size of the laminate porcelain was $69.19{\pm}5.94{\mu}m$ when an indentation load of 9.8N was applied, and the fracture toughness was $1.065{\pm}0.156MPa\;m^{1/2}$. 3. The fatigue life of laminate porcelain showed the constant fracture range at the stress level 27.46-35.30MPa. 4. When a cyclic flexure load was applied, the fatigue life of resin-bonded laminate porcelain was more decreased than that of laminate porcelain. 5. When a thermocycling was conducted, the crack growth rate of resin-bonded laminate porcelain was more increased than that of laminate porcelain. 6. Fracture surface showed the radial crack, the lateral crack, and the macroscopic crack branching region beneath the plastic deformation region when an indentation load of 9.8N was applied.

• International Journal of Fluid Machinery and Systems
• /
• 제10권2호
• /
• pp.146-153
• /
• 2017

Sediment flow through hydropower components causes hydro-abrasive erosion resulting in loss of efficiency, interruptions in power production and downtime for repair/maintenance. Online instruments are required to measure/capture the variations in sediment parameters along with collecting samples manually to analyse in laboratory for verification. In this paper, various sediment parameters viz. size, concentration (TSS), shape and mineral composition relevant to hydro-abrasive erosion were measured and discussed with respect to a hydropower plant in Himalayan region, India. A multi-frequency acoustic instrument was installed at a desilting chamber to continuously monitor particle size distribution (PSD) and TSS entering the turbine during 27 May to 6 August 2015. The sediment parameters viz. TSS, size distribution, mineral composition and shape entering the turbine were also measured and analysed, using manual samples collected twice daily from hydropower plant, in laboratory with instruments based on laser diffraction, dynamic digital image processing, gravimetric method, conductivity, scanning electron microscope, X-ray diffraction and turbidity. The acoustic instrument was able to capture the variation in TSS; however, significant deviations were found between measured mean sediment sizes compared to values found in the laboratory. A good relation was found for turbidity ($R^2=0.86$) and laser diffraction ($R^2=0.93$) with TSS, which indicated that turbidimeter and laser diffraction instrument can be used for continuous monitoring of TSS at the plant. Total sediment load passed through penstock during study period was estimated to be 15,500 ton. This study shall be useful for researchers and hydropower managers in measuring/monitoring sediment for hydro-abrasive erosion study in hydropower plants.

• 한국결정성장학회지
• /
• 제11권5호
• /
• pp.197-202
• /
• 2001

여러 조건에서 제조된 poly(ethylene terephthalate) 필름 시편들로부터 열처리 및 냉연신 조건이 시편의 물성에 미치는 영향을 조사하였다. 상온에서 만능시험기을 사용하여 미열처리 및 열처리된 시편들을 0.5에서 500 mm/min의 cross-head 속도로 단계적 연신을 행한 결과, 약 50, 72 및 $129^{\circ}C$에서 열처리된 시편들의 응력-변형 곡선에서는 응력 진동이 발생되지만, 약 $83^{\circ}C$에서 30분 동안 열처리된 시편의 응력-변형 곡선에서는 응력 진동이 발생되지 않음을 알 수 있었다. 시차 주사 열량기를 사용하여 $10^{\circ}C$/min의 승온 속도에서 열분석을 행하였고, 시편들의 유리전이온도, 결정화 피크, 용융 잠열, 결정화도를 측정하였다. 1 Hz의 주파수대에서 $1.5^{\circ}C$/min의 승온 속도로 multiple-function internal friction pendulum으로 시편들의 동적 기계분석도 수행하였으며, 미열처리, 열처리 및 연신 시편들의 순서대로 탄성계수 값이 증가함을 알 수 있었다.

• 한국염색가공학회지
• /
• 제27권1호
• /
• pp.18-26
• /
• 2015

para-aramid fibers were treated by atmosphere air plasma to improve the interfacial adhesion. The wettability of plasma-treated aramid fiber was observed by means of dynamic contact angle surface free energy measurement. Surface roughness were investigated with the help of scanning electron microscopy and atomic force microscopy. The tensile test of aramid fiber roving was carried out to determine the effect of plasma surface treatments on the mechanical properties of the fibers. A pull-out force test was carried out to observe the interfacial adhesion effect with matrix material. It was found that surface modification and a chemical component ratio of the aramid fibers improved wettability and adhesion characterization. After oxygen plasma, it was indicated that modified the surface roughness of aramid fiber increased mechanical interlocking between the fiber surface and vinylester resin. Consequently the oxygen plasma treatment is able to improve fiber-matrix adhesion through excited functional group and etching effect on fiber surface.

• 한국재료학회지
• /
• 제22권9호
• /
• pp.454-458
• /
• 2012

Various adhesive materials are used in flip chip packaging for electrical interconnection and structural reinforcement. In cases of COF(chip on film) packages, low temperature bonding adhesive is currently needed for the utilization of low thermal resistance substrate films, such as PEN(polyethylene naphthalate) and PET(polyethylene terephthalate). In this study, the effects of anhydride and dihydrazide hardeners on the low-temperature snap cure behavior of epoxy based non-conductive pastes(NCPs) were investigated to reduce flip chip bonding temperature. Dynamic DSC(differential scanning calorimetry) and isothermal DEA(dielectric analysis) results showed that the curing rate of MHHPA(hexahydro-4-methylphthalic anhydride) at $160^{\circ}C$ was faster than that of ADH(adipic dihydrazide) when considering the onset and peak curing temperatures. In a die shear test performed after flip chip bonding, however, ADH-containing formulations indicated faster trends in reaching saturated bond strength values due to the post curing effect. More enhanced HAST(highly accelerated stress test) reliability could be achieved in an assembly having a higher initial bond strength and, thus, MHHPA is considered to be a more effective hardener than ADH for low temperature snap cure NCPs.

• 폴리머
• /
• 제27권3호
• /
• pp.183-188
• /
• 2003

유전체 분광계를 사용하여 불소함유 에폭시 수지, 벤조트리플루오라이드의 다이글리시딜 에테르(FER)/다이아미노다이페닐메탄 (DDM)과 비스페놀 A의 다이글리시딜 에테르 (DGEBA)DDM 시스템의 유전상수를 측정하였으며, DMA와 TGA에 의한 열분석을 통하여 유리 전이 온도 및 열분해 개시온도, 최대 무게 감량시 온도, 그리고 분해 활성화 에너지 등 열안정성 인자를 고찰하였다. 경화된 시편의 기계적 물성은 파괴 인성, 굴곡강도 및 충격강도 실험을 통하여 알아보았으며, 주사전자 현미경을 사용하여 시편의 파단 특성을 조사하였다. 실험 결과, DGEBA/DDM 시스템에 비해 FER/DDM 시스템은 낮은 유전 상수를 나타내었으며, 경화된 시편의 기계적 물성은 높은 값을 나타내었다. 이는 trifluoromethyl (CF$_3$) 기의 도입으로 인하여 전기적 특성과 기계적 물성이 증가한 것으로 사료된다.