• Geomechanics and Engineering
• /
• 제12권5호
• /
• pp.815-830
• /
• 2017

Due to numerous environmental concerns in recent years, the search for and the development of sustainable technologies have been pursued. In particular, environmentally friendly methods of soil improvement, such as the potential use of biopolymers, have been researched. Previous studies on the use of biopolymers in soil improvement have shown that they can provide substantial strengthening efficiencies. However, in order to fully understand the applicability of biopolymer treated soils, various properties of these soils such as their dynamic properties must be considered. In this study, the dynamic properties of gel-type biopolymer treated soils were observed through the use of resonant column tests. Gellan gum and Xanthan gums were the target gel-type biopolymers used in this study, and the target soil for this study was jumunjin sand, the standard sand of Korea. Through this study it was demonstrated that biopolymers can be used to enhance the dynamic properties of the soil, and that they offer possibilities of reuse to reduce earthquake related soil failures.

• Macromolecular Research
• /
• 제13권5호
• /
• pp.453-459
• /
• 2005

Natural fiber henequen/unsaturated polyester (UPE) composites were fabricated by means of a compression molding technique using chopped henequen fibers treated at various electron beam (EB) dosages. The interfacial shear strength (IFSS), dynamic mechanical properties, and thermal expansion behavior were investigated through a single fiber microbonding test, fractographic observation, dynamic mechanical analysis, and thermomechanical analysis, respectively. The results indicated that the interfacial and dynamic mechanical properties significantly depended on the level of the EB treatment irradiated onto the henequen fiber surfaces. The effect of EB treatment on the IFSS, storage modulus and fracture surface of the henequen/UPE composites agreed with each other. The results of this study also suggested that the modification of henequen fiber surfaces at 10 kGy EB is the most effective for improving the interfacial properties of the henequen/UPE composites.

• 한국식품과학회지
• /
• 제29권5호
• /
• pp.932-938
• /
• 1997

Changes in viscosity and dynamic theological properties of Job's-tears were measured by Bohlin dynamic tester as a function of moisture, and measurement was performed within a linear viscoelastic range. The result of the shear stress vs shear rate of Job's-tears at different moisture contents $(50{\sim}75%)$ was applied to mathematical models and Herschel-Bulkley model showed the highest correlation coefficient. Lower moisture content (55%) produced higher yield stress and consistency index, but lower flow behavior index, whereas higher moisture content showed reverse effects. Job's-tears with $50{\sim}70%$ moisture contents showed a higher storage modulus (G') than loss modulus (G') at all frequencies, showing a higher concentrated polymer characteristics. However, higher moisture content (>75%) showed crossover point between G' and G', and frequency dependency. As the moisture content was increased, the amount of viscoelastic properties such as G', G', complex viscosity decreased during heating, and initial temperature and miximum value of viscoelastic properties shifted to higher temperatures, representing the moisture-dependence of Job's-tears upon theological properties.

• Structural Engineering and Mechanics
• /
• 제82권1호
• /
• pp.31-40
• /
• 2022

In structural engineering, the material properties of the structures such as elastic modulus, shear modulus, density, and size may not be deterministic and may vary at different locations. The dynamic response analysis of such structures may need to consider these properties as stochastic. This paper introduces a stochastic finite element method (SFEM) approach to analyze moving loads problems. Firstly, Karhunen-Loéve expansion (KLE) is applied for expressing the stochastic field of material properties. Then the mathematical expression of the random field is substituted into the finite element model to formulate the corresponding random matrix. Finally, the statistical moment of the dynamic response is calculated by the point estimation method (PEM). The accuracy and efficiency of the dynamic response obtained from the KLE-PEM are demonstrated by the example of a moving load passing through a simply supported Euler-Bernoulli beam, in which the material properties (including elastic modulus and density) are considered as random fields. The results from the KLE-PEM are compared with those from the Monte Carlo simulation. The results demonstrate that the proposed method of KLE-PEM has high accuracy and efficiency. By using the proposed SFEM, the random vertical deflection of a high-speed railway (HSR) bridge is analyzed by considering the random fields of material properties under the moving load of a train.

• Journal of Pharmaceutical Investigation
• /
• 제29권4호
• /
• pp.295-307
• /
• 1999

Using a Rheometries Fluids Spectrometer (RFS II), the dynamic viscoelastic properties of aqueous poly(ethylene oxide) (PEO) solutions in small amplitude oscillatory shear flow fields have been measured over a wide range of angular frequencies. The angular frequency dependence of the storage and loss moduli at various molecular weights and concentrations was reported in detail, and the result was interpreted using the concept of a Deborah number De. In addition, the experimentally determined critical angular frequency at which the storage and loss moduli become equivalent was compared with the calculated characteristic time (or its inverse value), and their physical significance in analyzing the dynamic viscoelastic behavior was discussed. Finally, the relationship between steady shear flow and dynamic viscoelstic properties was examined by evaluating the applicability of some proposed models that describe the correlations between steady flow viscosity and dynamic viscosity, dynamic fluidity, and complex viscosity. Main results obtained from this study can be summarized as follows: (1) At lower angular frequencies where De<1, the loss modulus is larger than the storage modulus. However, such a relation between the two moduli is reversed at higher angular frequencies where De>l, indicating that the elastic behavior becomes dominant to the viscous behavior at frequency range higher than a critical angular frequency. (2) A critical angular frequency is decreased as an increase in concentration and/or molecular weight. Both the viscous and elastic properties show a stronger dependence on the molecular weight than on the concentration. (3) A characteristic time is increased with increasing concentration and/or molecular weight. The power-law relationship holds between the inverse value of a characteristic time and a critical angular frequency. (4) Among the previously proposed models, the Cox-Merz rule implying the equivalence between the steady flow viscosity and the magnitude of the complex viscosity has the best validity. The Osaki relation can be regarded to some extent as a suitable model. However, the DeWitt, Pao and HusebyBlyler models are not applicable to describe the correlations between steady shear flow and dynamic viscoelastic properties.

• 대한토목학회논문집
• /
• 제10권2호
• /
• pp.103-112
• /
• 1990

본 연구는 내진설계시 많은 불확실성을 내포하는 지반의 거동특성을 규명하고, 적용대상지반의 확충 및 경제성 제고를 위하여 토사지반의 동적지반특성 평가 및 지반-구조물 거동 특성을 고찰하였다. 예제해석은 토사지반에 원전 containment 구조물이 설치된 경우를 가상하여 지진하중에 대한 지반-구조물 시스템의 거동을 반무한체해석과 유한요소해석으로 분석하였다. 이는 토사지반에 원전이 건설될 경우에 고려해야 할 안정성 및 경제성 분석의 일환으로 수행되었으며, 토사지반의 큰 비선형거동을 정확하게 해석에 반영하기 위한 해석 software와 지반입력 data의 합리적인 평가방안 등을 예제해석을 통하여 분석하였다. 예제해석결과를 종합해 볼 때 토사지반의 동적거동의 정확한 분석을 위하여 비선형 유한요소해석은 Seed & Idriss 모델이, 선형 유한요소해석은 지진하중에 대한 1차원 지반거동시 변형율에서의 동적지반특성을 이용한 방법이, 반무한체해석은 정적하중시 변형율에서의 동적지반특성을 이용한 방법이 가장 합리적으로 동적지반특성을 평가하는 것으로 추천할 수 있다.

• 한국지진공학회논문집
• /
• 제24권4호
• /
• pp.157-167
• /
• 2020

In this study, a field bridge test was conducted to find the dynamic properties of cable supported bridges with resilient-friction base isolation systems (R-FBI). Various ambient vibration tests were performed to estimate dynamic properties of a test bridge using trucks in a non-transportation state before opening of the bridge and by ordinary traffic loadings about one year later after opening of the bridge. The dynamic properties found from the results of the tests were compared with an analysis model. From the result of the ambient vibration tests of the cable supported bridge with R-FBI, it was confirmed that the dynamic properties were sensitive to the stiffness of the R-FBI in the bridge, and the seismic analysis model of the test bridge using the effective stiffness of the R-FBI was insufficient for reflecting the dynamic behavior of the bridge. In the case of cable supported bridges, the seismic design must follow the "Korean Highway Bridge Design Code (Limit State Design) for Cable supported bridges." Therefore, in order to reflect the actual behavior characteristics of the R-FBI installed on cable-supported bridges, an improved seismic design procedure should be proposed.

• 한국지반공학회지:지반
• /
• 제6권2호
• /
• pp.5-20
• /
• 1990

지반-구조물의 동적 상호작용 해석에 있어서, 흙의 특성치들 뿐만 아니라 입력지진 자체도 무척 Random하다. 본 논문에서는 이 Randomness를 고려하기 위하여 확률론적 방법을 적용하여 상호작용 해석에 미치는 영향을 연구하였다. 이 확률론적 적용을 위해 Elastic Half Space 이론에 의해 얻어진 Complex Response 방법, Random Vibration Theory와 Rosenblueth의 Two Point Estimate 방법을 사용하여 해석을 수행하여 다음과 같은 결론을 얻었다. 1) 흙의 동적 특성치 뿐만 아니라 Kanai-Tajimi에 의하여 제안된 입력지진의 PSD Function 의 불확정성도 상당히 큼을 알 수 있었다. 이때의 Parameter의 변동계수는 0.4에서 0.6의 범위를 갖는다. 2) 흙의 동적 특성치의 불확정성의 영향이 입력지진의 그것보다는 구조물에 미치는 영향이 큼 을 알 수 있었다. 3) 입력지진과 흙의 동적 특성치 사이의 상관계수에 의한 영향은 무척 작음을 알 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.275-278
• /
• 2005

In this study, the dynamic properties of a floor impact sound isolation pad expressed in terms of the natural frequency, the dynamic stiffness per unit area and the loss factor are measured by the resonant method. By using the measured dynamic properties, the vibration transmissibility diagram is obtained for each isolation pad, which is compared with the values tested by the impact sound sources at the room in an apartment. From the comparative results, it is found that the noise reduction Performances. of isolation pads are closely connected with the natural frequency and the dynamic stiffness per unit area.

• 한국재료학회지
• /
• 제26권5호
• /
• pp.281-286
• /
• 2016

In the present study, the tensile properties and dynamic strain aging of an Fe-24.5Mn-4Cr-0.45C alloy were investigated in terms of strain rate. During tensile testing at room temperature, all the stress-strain curves exhibited serrated plastic flows related to dynamic strain aging, regardless of the strain rate. Serration appeared right after yield stress at lower strain rates, while it was hardly observed at high strain rates. On the other hand, strain-rate sensitivity, indicating a general relationship between flow stress and strain rate at constant strain and temperature, changed from positive to negative as the strain increased. The negative strain-rate sensitivity can be explained by the Portevin Le Chatelier effect, which is associated with dynamic strain aging and is dependent on the strain rate because it is very likely that the dynamic strain aging phenomenon in high-manganese steels is involved in the interaction between moving dislocations and point-defect complexes.