• 제목/요약/키워드: dynamic modulus

검색결과 930건 처리시간 0.033초

하향식 탄성파를 통한 경기 편마암의 동탄성 특성연구 (A Study on the Characteristics of Dynamic Elastic Modulus in GyeongGi Gneiss Complex by Down Hole Test)

  • 이벽규;이수곤
    • 지질공학
    • /
    • 제18권4호
    • /
    • pp.371-379
    • /
    • 2008
  • 본 연구에서는 경기도 일대의 편마암지역 11곳에서 다운홀(down-hole) 탄성파탐사를 이용하여 획득한 탄성파속도를 이용, 편마암지역에서의 탄성파 속도와 동탄성계수와의 상관성을 조사하였다. 연구결과 편마암에서의 탄성파속도의 특성은 $V_s=0.5589{\times}V_p$ 상관관계를 보여준다. 탄성파 속도와 동탄성계수와의 상관관계는 두 개의 군으로 분리된다. 풍화가 진행됨에 따라 첫 번째 군은 암석의 비중에 큰 영향을 받지만 두 번째 군에서는 절리면의 간격에 영향을 받는다. 풍화가 진행됨에 따라 첫 번째 군은 감소하는 경향을 보인다. 경암반에서의 압축파속도($V_p$) 동탄성계수($E_d$, $G_d$, $K_d$)의 상관관계는 선형으로 분석되었지만, 보통암반에서의 압축파속도($V_p$)와 동탄성계수($E_d$, $G_d$, $K_d$)의 상관관계는 2차 함수 포물선 곡선의 형태를 띠는 것으로 분석되었다. 전단파속도($V_s$)와 동탄성계수($E_d$, $G_d$, $K_d$)의 상관관계 또한 압축파속도($V_p$)와 유사한 결과를 보이는 것으로 분석되었다.

가야금(伽倻琴) 향판재(響板材)의 개선(改善)에 관(關)한 연구(硏究) (Studies on the Improvements for GAYAKUM Sounding Boards)

  • 홍병화
    • Journal of the Korean Wood Science and Technology
    • /
    • 제18권4호
    • /
    • pp.65-78
    • /
    • 1990
  • For the purpose of Improving the sounding boards for the conventional GAYAKUM, I was making approximately 202 specimens of radial board, 371 specimens of tangential board by cutting along the grain and the part of stem and 31 specimens of the disjointed traditional GAYAKUM made in Paulownia coreana. And it was conducted to measure specific gravity, dynamic Young's modulus, internal friction, resonant frequency, velosity of sound and width of annual ring by the method of the frexural vibration in a free-free bar in the audio frequency range. And it confirmed the juvenile wood by measuring wood fiber length of specimens. It was also conducted to investigate dynamic properties and moisture absorption by various heat-treatment and to test dynamic Young's modulus and internal friction for the disjointed conventional GAYAKUM. The results obtained were summarized as follow: 1. The Juvenile wood is located within about 7 annual rings from the pith in Paulownia coreana. 2. As increased with the specific gravity, the dynamic Young's modulus had more and more increased, but the internal friction had slightly decreased. 3. I think that radial board would be good for sounding board wood. because radial board is higher than tangential board in dynamic Young's mudulus and internal friction is lower than tangential board. 4. The value of mean dynamic Young's modulus on the conventional GAYAKUM, radial board and tangential board of 604 samples is $0.4283\pm0.037(\times10^{11}dyne/cm^2)$, $0.4316\pm(\times10^{11}dyne/cm^2)$ and $0.4234\pm0.112(\times10^{11}dyne/cm^2)$ respectively. The value of the radial board showed little higher than that of conventional GAYAKUM, but It had a similar tendency between conventional GAYAKUM and tangential board. 5. The annual ring width by four aspect is more narrow in north and west than that of others. 6. The values of specific gravity and dynamic Young's modulus in the mature wood showed higher than those of juvenile wood. 7. As the grain angle in the butt wood more increased to bark from pith, the dynamic Young's modulus were low. Then it was not good for sounding board. 8. It appeared that the heat-treatment for sounding board wood had a more effect to do the treatment of hotiron on surface after heat-treatment during 24 hours in $60^{\circ}C$ temperature. 9. As increased with the temperature, the rate of moisture absorption of heat-treatment wood had decreased. In conclusion, I thought that the sounding board wood for GAYAKUM would had the most effect to do the treatment of hotiron on surface after heat-treatment during 24 hours in $60^{\circ}C$ temperature using the radial board of mature wood.

  • PDF

그라우트 주입율 변화에 따른 사질토의 동적계수 특성 (Characteristics of Dynamic Parameter of Sandy Soil According to Grout Injection Ratio)

  • 안광국;박준영;오종근;이준대;한기환
    • 한국지반환경공학회 논문집
    • /
    • 제12권5호
    • /
    • pp.59-63
    • /
    • 2011
  • 전단탄성계수와 감쇠비와 같은 동적지반계수는 반복하중과 동적하중을 받는 지반구조물 설계에서 중요한 요소이다. 선형 한계변형률 내에서 미소변형률에 관한 전단탄성계수와 감쇠비는 변형률과 관계없이 일정하다. 전단탄성계수는 최대전단탄성계수로 감쇠비는 최소 감쇠비로 고려하였다. 동적변형특성 범주내의 최대선형탄성계수에 관련된 많은 시험들이 수행됨과 동시에 간극비, 과압밀비, 구속압, 지질이력, PI 그리고 하중주기수에 관련된 많은 인자들이 동적지반특성에 영향을 미친다. 그러나 그라우팅에 의해 향상된 지반동적특성에 관한 연구는 지하연속벽시공, 심층혼합처리공법, 강관다단그라우팅과 같이 미비한 실정이다. 본 논문에서는 그라우팅에 의해 향상된 동적지반특성을 연구하기 위하여 함수비(20%, 25%, 30%), 그라우트 주입율(5%, 10%, 15%),양생기간(7일, 28일)을 변화시키면서 공진주시험을 실시하였다. 그 결과, 밀크 그라우트의 주입율과 재령, 함수비에 따라 동적계수인 전단탄성계수와 감쇠비가 영향을 받는 것으로 나타났다.

Measurement of Dynamic Compressive Properties of Apples using the Oscillatory Test

  • Lee, Jong-Whan;Tan, Jinglu;Waluyo, Sri
    • Journal of Biosystems Engineering
    • /
    • 제37권1호
    • /
    • pp.28-35
    • /
    • 2012
  • Purpose: This study performed the oscillatory test using the texture analyzer to characterize the viscoelastic behavior of apples such as the storage modulus (E'), the loss modulus (E"), the complex modulus (${\mid}E^*{\mid}$) and the energy dissipated per cycle ($W_{diss}$). Methods: The sinusoidal deformation with the frequency of 1-10 Hz and the maximum displacement of 0.1 mm were applied to the flesh tissues of Fuji, Golden Delicious and Red Delicious apples. The Lissajous figure was used to measure the phase angle(${\delta}$) between stress and strain curve. Results: Trigger force was critical to the measurement of the phase angle. E', E", ${\mid}E^*{\mid}$ and Wdiss were measured using the Lissajous figure and the phase angle. The complex modulus of Golden Delicious apple was significantly lower than those of Fuji apple and Red Delicious apple. Conclusions: Apple flesh was exhibiting more elasticity at low frequency, and more viscosity at high frequency. Dynamic compressive properties of Fuji apple were similar to those of Red Delicious apple but significantly different from those of Golden Delicious apple.

석분과 플라이 애쉬를 혼입한 투수용 폴리머 콘크리트의 공학적 성질 (Engineering Properties of Permeable Polymer Concrete With Stone Dust and Fly Ash)

  • 성찬용;정현정
    • 한국농공학회지
    • /
    • 제38권4호
    • /
    • pp.147-154
    • /
    • 1996
  • This study wag performed to evaluate the engineering properties of permeable polymer concrete with stone dust and fly ash and unsaturated polyester resin. The following conclusions were drawn. 1. The highest strength was achieved by stone dust filled permeable polymer concrete, it was increased 17% by compressive strength, 188% by bending strength than that of the normal cement concrete, respectively. 2. The water permeability was in the range of 3.O76~4.152${\ell}/ cm{^2}/h$, and it was largely dependent upon the mix design. These concrete can be used to the structures which need water permeability. 3. The static modulus of elasticity was in the range of $1.15{\times} 10^5kg/cm^2$, which was approximately 53 56% of that of the normal cement concrete. 4. The poisson's number of permeable polymer concrete was in the range of 5.106~5.833, which was less than that of the normal cement concrete. 5. The dynamic modulus of elasticity was in the range of $1.29{\times} 10^5~1.5{\times} 10^5 kg/cm^2$, which was approximately less compared to that of the normal cement concrete. Stone dust filled permeable polymer concrete was showed higher dynamic modulus. The dynamic modulus of elasticity were increased approximately 7~13% than that of the static modulus. 6. The compressive strength, bending strength, elastic modulus, poisson's ratio, longitudinal strain and horizontal strain were decreased with the increase of poisson's number and water permeability at those concrete.

  • PDF

잘 부서지는 모래의 동적전단탄성계수 (Dynamic Shear Modulus of Crushable Sand)

  • 윤여원
    • 한국지반공학회지:지반
    • /
    • 제8권4호
    • /
    • pp.67-80
    • /
    • 1992
  • 동적인 문제를 해석하는 데 있어서 최대전단탄성계수의 결정은 어떤 변형률에서의 전단응력을 추정하는데 필연적이라 할 수 있다. 그동안 실리카질 모래에 관한 모델이 준시되어 왔지만 그러한 모델을 부서지는 모래에 직점적으로 적용하는 데는 모래의 부서짐(crushability)때문에 어려움이 있다. 본 연구에서는 부서지는 모래의 미소변형률에서의 동적인 거동이 평가되었으며 실험한 모래의 최대 전단탄성 계수에 관한 모델이 제시되었다. 부서지는 모래의 전단탄성 계수는 느슨한 모래의 경우는 실리카질 모래와 유사한 값을 보이나 밀도가 증가하면 입자간의 접촉면적이 커져서 비틀력 (torsional force)으로 인해 모래가 부서져 전단저항이 작아지는 것으로 보인다. 그리고 계수치 (modulus number) 가 Been과 Jefferies (1985)의 상태 정수 (state parameter)로 표현되었다.

  • PDF

생리학적인 하중 조건에서 소 상완골 연골의 기계적 특성 (In Situ Mechanical Response of Bovine Humeral Head Articular Cartilage in a Physiological Loading Environment)

  • 박성훈
    • 한국정밀공학회지
    • /
    • 제25권1호
    • /
    • pp.145-150
    • /
    • 2008
  • One of the unresolved questions in articular cartilage biomechanics is the magnitude of the dynamic modulus and tissue compressive strains under physiological loading conditions. The objective of this study was to characterize the dynamic modulus and compressive strain magnitudes of bovine articular cartilage at physiological compressive stress level and loading frequency. Four bovine calf shoulder joints (ages 2-4 months) were loaded in Instron testing system under load control, with a load amplitude up to 800 N and loading frequency of 1 Hz, resulting in peak engineering stress amplitude of ${\sim}5.8\;MPa$. The corresponding peak deformation of the articular layer reached ${\sim}27%$ of its thickness. The effective dynamic modulus determined from the slope of stress versus strain curve was ${\sim}23\;MPa$, and the phase angle difference between the applied stress and measured strain which is equivalent to the area of the hystresis loop in the stress-strain response was ${\sim}8.3^{\circ}$. These results are representative of the functional properties of articular cartilage in a physiological loading environment. This study provides novel experimental findings on the physiological strain magnitudes and dynamic modulus achieved in intact articular layers under cyclical loading conditions.

소형 FWD를 이용한 노상토의 다짐도 추정에 관한 연구 (A Study on the Estimation of Relative Compaction on the Subgrade using a Portable FWD)

  • 강희복;김교준;강진태;김종렬
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제11권6호
    • /
    • pp.213-219
    • /
    • 2007
  • 본 연구는 소형FWD를 사용하여 노상토의 다짐도를 추정하였으며 본 연구의 결과는 다음과 같다. 다짐 회수에 따른 동적변형계수의 변화를 보면, 다짐 회수가 4(15MPa)에서 8(18.3MPa)로 증가할 때 동적변형계수는 27% 증가하였으며, 다짐 회수가 12(27.9MPa)였을 때의 동적변형계수는 다짐 회수 4일 때의 두 배의 값을 나타내었다. 다짐 회수의 증가에 따른 건조단위중량과 동적변형계수와의 관계에서 95% 다짐도에 해당하는 롤러의 다짐 회수는 약 13회이며, 이때의 동적변형계수 분포는 27MPa~29MPa이었다

Estimating properties of reactive powder concrete containing hybrid fibers using UPV

  • Nematzadeh, Mahdi;Poorhosein, Reza
    • Computers and Concrete
    • /
    • 제20권4호
    • /
    • pp.491-502
    • /
    • 2017
  • In this research, the application of ultrasonic pulse velocity (UPV) test as a nondestructive method for estimating some of the mechanical and dynamic properties of reactive powder concrete (RPC) containing steel and polyvinyl alcohol (PVA) fibers, as well as their combination was explored. In doing so, ten different mix designs were prepared in 19 experimental groups of specimens containing three different volume contents of steel fibers (i.e., 1, 2, and 3 %) and PVA fibers (i.e., 0.25, 0.5, and 0.75 %), as well as hybrid fibers (i.e., 0.25-0.75, 0.5-0.5, and 0.75-0.25 %). The specimens in these groups were prepared under the two curing regimes of normal and heat treatment. Moreover, the UPV test results were employed to estimate the compressive strength, dynamic modulus, shear modulus, and Poisson's ratio of the RPC concrete and to investigate the quality level of the used concrete. At the end, the effect of the specimen shape and in fact the measuring distance length on the UPV results was explored. The results of this research suggest that the steel fiber-containing RPC specimens demonstrate the highest level of ultrasonic pulse velocity as well as the highest values of the mechanical and dynamic properties. Moreover, heat treatment has a positive effect on the density, UPV, dynamic modulus, Poisson's ratio, and compressive strength of the RPC specimens, whereas it leads to a negligible increase or decrease in the shear modulus and static modulus of elasticity. Furthermore, the specimen shape affects the UPV of fiber-lacking specimens while negligibly affecting that of fiber-reinforced specimens.

충격공진법을 이용한 콘크리트 원판 시편의 탄성계수 추정에 크기 인자가 미치는 영향 (Effect of Size Factor on Estimating Elastic Modulus of Disk-Shaped Concrete Specimen Using Impact Resonance Test)

  • 김민석;손정진;이창준;정철우
    • 한국건축시공학회지
    • /
    • 제23권1호
    • /
    • pp.11-22
    • /
    • 2023
  • 본 연구에서는 디스크형 공시체를 활용하여 콘크리트의 깊이별 열화도를 평가하기 위한 방법을 개발하고자 하였다. 이를 위해 원통형 콘크리트 시편의 동탄성계수는 양단자유공진주기법을, 디스크형 콘크리트 시편의 동탄성계수는 임펄스 기법과 충격공진기법을 활용하여 측정하였고, 이를 비교 분석하였다. 실험결과, 임펄스 기법 및 충격공진기법 모두 동일한 지름일 경우 두께가 두꺼워지면 디스크 시편의 동탄성계수는 원주형 공시체의 동탄성계수에 가깝게 측정되었으며, 그 값의 변동성 은 줄어들었다. 또한 같은 (두께)/(반지름) 비율일 경우 지름이 증가하면 디스크 시편의 동탄성계수 측정값의 변동성은 감소하였고, 이러한 경향은 충격공진기법을 이용한 측정에서 더욱 분명하게 나타났다. 디스크의 동탄성계수 측정 시 지름 100mm, 두께25mm의 시편에 대해 충격공진기법을 이용하는 것이 오차율을 줄일 수 있는 방법으로 확인되었다.