• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.36-38
• /
• 2018

As the battery capacity requirement increases, battery cells are connected in a parallel configuration. However, the sharing current of each battery cell becomes unequal due to the imbalance between cell's impedance which results the mismatched states of charge (SOC). The conventional fixed-resistance balancing methods have a limitation in battery equalization performance and system efficiency. This paper proposes a battery equalization method based on dynamic resistance technique, which can improve equalization performance and reduce the loss dissipation. Based on the SOC rate of parallel connected battery cells, the switches in the equalization circuit are controlled to change the equivalent series impedance of the parallel branch, which regulates the current flow to maximize SOC utilization. To verify the method, operations of 4 parallel-connected 18650 Li-ion battery cells with 3.7V-2.6Ah individually are simulated on Matlab/Simulink. The results show that the SOCs are balanced within 1% difference with less power dissipation over the conventional method.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.3
• /
• pp.181-188
• /
• 2019

Purpose: This study was performed to determine the effects of a gluteus maximus strengthening exercise on both spinal alignment and dynamic balance in subjects with kyphosis. Methods: We measured the kyphosis angle of 150 subjects and selected those whose kyphosis angle was > $50^{\circ}$. The participants included 10 male and 12 female college students. After a gluteus maximus strengthening exercise was applied, the subjects were measured by the formetric 4D and Biorescue systems. The collected data were analyzed by a paired t-test with the SPSS (Ver. 21) program for spinal alignment and dynamic balance comparisons both before and after the gluteus maximus strengthening exercise was completed. Results: The results regarding spinal alignment showed statistically significant decreases in pelvic tilt, kyphotic angle, and lordotic angle after the intervention (p < .05). However, trunk imbalance, pelvic torsion, surface rotation, and lateral deviation were not significantly different after the exercise. The results of the dynamic balance showed statistically significant increases in limits of stability after the exercise (p < .05). Conclusion: The above results suggest that the implemented gluteus maximus strengthening exercise may be effective for spinal alignment and dynamic balance in subjects with kyphosis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11A
• /
• pp.933-940
• /
• 2011

In this paper, Ka-band transceiver for road watch radar system is designed and fabricated. The transceiver for road watch radar system is composed of waveform generator, frequency generator. IF transceiver and RF up/down converter. The transceiver especially has 3 different waveform mode for target detection range. The transceiver had over 150 MHz bandwidth in Ka-band and 22 dBm output power. The receiver gain and noise figure was 30 dB and 4 dB respectively. The receive dynamic range was 65.28dB and amplitude imbalance and phase imbalance of I/Q channel was 0.3 dB and 1.8 degree respectively. The transceiver meets the required electrical performances through the individual tests.

• The Journal of Information Systems
• /
• v.24 no.2
• /
• pp.73-96
• /
• 2015

Purpose Information security industry is rapidly growing, but has been confronted with many challenges in a business environment. One of them is the imbalance between supply and demand of information security manpower, which has caused an insecure market situation. Therefore, this study has derived factors of promoting and hindering information security manpower from governance, academics, corporations, and workforce perspectives, and has analyzed a sequence of cause and effect of each factor. Design/methodology/approach This study is an exploratory research based on the interviews. The causal loop diagram (CLD) was developed to deduce key issues and propose alternatives. Findings The result of this study is expected to help the development of information security manpower in Korea, by minimizing the potential negative effects as well as maximizing the positive effects. This study found out the dynamic causes and effects of the security manpower system in each stakeholder's perspective. The cause-and-effect relationships between the stakeholders will be able to contribute to solve the imbalance of supply and demand in security manpower system.

• Toxicological Research
• /
• v.22 no.3
• /
• pp.253-266
• /
• 2006

Bone is a dynamic tissue that is constantly being remodelled. Resolution of bone and formation of new bone are closely linked, so that bone mass remains constant. With age, this process becomes unlinked with an imbalance in bore resorption and formation that results in a net loss of bone. Especially, osteoporosis is a disease characterized by low bone mass with age. One form of aging-related primary osteoporosis is postulated with the reduction of circulating estrogen, rapid bone loss occurs as a result of enhanced bore remodelling with an excess of resorption over bore formation. The oxidative stress is also involved in the pathogenesis of osteoporosis. Oxidative stress by cytokines, such as IL-a and TNF-${\alpha}$, inhibits osteoblast function in vitro and stimulates osteoblast apoptosis resulting in an imbalance in bore remodelling. The present article reviews the current perspectives on the interaction between bone remodelling and factors such as estrogen and oxidative stress, providing an interpretation of bone diseases in a view of molecular mechanisms.

• Tribology and Lubricants
• /
• v.34 no.1
• /
• pp.9-15
• /
• 2018

Modern high-performance automotive turbochargers (TCs) implement ceramic hybrid angular contact ball bearings in series with squeeze film dampers (SFDs) to enhance transient responses, thereby reducing the overall emission levels. The current study predicts the rotordynamic responses of the commercial automotive TCs (compressor wheel diameter = ~53 mm, turbine wheel diameter = ~43 mm, and shaft diameter at the bearing locations = ~7 mm) supported on ball bearings and SFDs for various design parameters of SFDs, including radial clearance, axial length, lubricant viscosity, and rotor imbalance conditions (i.e., amplitudes and phase angles) while increasing rotor speed up to 150 krpm. This study validates the predictive rotor finite element model against measurements of mass, polar and transverse moments of inertia, and free-free mode natural frequencies and mode shapes. A nonlinear rotordynamic model integrates nonlinear force coefficients of SFDs to calculate the transient responses of the TC rotor-bearing system. The predicted results show that SFD radial clearances, as well as phase angles of rotor imbalances, have the paramount effect on the dynamic responses of TC shaft motions.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.9
• /
• pp.454-461
• /
• 2001

Acoustic noise and vibration of a BLDC motor is a coupled phenomenon between mechanical characteristics and electromagnetic origins through the motor air-gap. When a relative misalignment of rotor in the air-gap center exists on the assemblage, it is considered to influence the motor system characteristics. In this paper, the back electro motive force(BEMF) is analyzed by Finite Element Method(FEM) and verified by experiments for the SPM and IPM type motors. For magnetic field analysis, a FEM is used to account for the magnetic saturation. Using these results, the FEM is made to determine the appropriate electromagnetic field analysis in BLDC motors with rotor eccentricity ratio. A radial magnetic imbalance force of BLDC motor with rotor eccentricity is analyzed. Results demonstrate that the imbalance force is increased according to the degree of misalignment. An IPM motor, mostly chosen to realize high-speed operation, shows a worse effect on magnetic unbalanced forces and dynamic responses compared with SPM motor due to magnetic saturation when the rotor eccentricity exists.

• Korean Journal of Health Education and Promotion
• /
• v.31 no.1
• /
• pp.57-70
• /
• 2014

Objectives: The purpose of this study was to build a conceptual framework of bullying in nursing workplace. Methods: A comprehensive literature review was conducted to identify concepts in relation to bullying in nursing workplace by searching research articles published between 1995 and 2013. In-depth interviews were performed with 14 nurses who experienced bullying at work. The Hybrid Model was applied for concept analysis which led to identify attributes of bullying in nursing workplace. Results: The antecedents of bullying in nursing workplace were offenders, victims, and administrators. They create negative effects on organizational culture and imbalance of power between authority and subordinate workers in the organization. Bullying in nursing workplace that occurred in the forms of inefficient organizational culture, imbalance of power, and the vulnerability of individual or individuals and groups of individuals formed an unstable dynamic. It is expressed as verbal and nonverbal bullying, work-related bullying, and external threats. Consequently, workplace bullying causes physical and psychological withdrawal and increased negative energy in an organization. Conclusions: Workplace bullying consisted of verbal abuse, alienation, unreasonable work processes, restriction on work-related rights, and external threat.

• Journal of Power Electronics
• /
• v.19 no.1
• /
• pp.89-98
• /
• 2019

This paper analyzes the input side performance of a conventional three-phase to single-phase matrix converter (3-1MC). It also presents the input-side waveform quality under this topology. The suppression of low-frequency input current harmonics is studied using the 3-1MC plus capacitance compensation unit. The constraint between the modulation function of the output and compensation sides is analyzed, and the relations among the voltage utilization ratio and the output compensation capacitance, filter capacitors and other system parameters are deduced. For a 3-1MC without large-capacity energy storage, the system performance is susceptible to input voltage imbalance. This paper decouples the inner current of the 3-1MC using a Lyapunov function in the input positive and negative sequence bi-coordinate axes. Meanwhile, the outer loop adopts a voltage-weighted synthesis of the output and compensation sides as a cascade of control objects. Experiments show that this strategy suppresses the low-frequency input current harmonics caused by input voltage imbalance, and ensures that the system maintains good static and dynamic performances under input-unbalanced conditions. At the same time, the parameter selection and debugging methods are simple.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.6
• /
• pp.2429-2449
• /
• 2018

Dynamic data possession verification is a common requirement in cloud storage systems. After the client outsources its data to the cloud, it needs to not only check the integrity of its data but also verify whether the update is executed correctly. Previous researches have proposed various schemes based on Merkle Hash Tree (MHT) and implemented some initial improvements to prevent the tree imbalance. This paper tries to take one step further: Is there still any problems remained for optimization? In this paper, we study how to raise the efficiency of data dynamics by improving the parts of query and rebalancing, using a new data structure called Rank-Based Merkle AVL Tree (RB-MAT). Furthermore, we fill the gap of verifying multiple update operations at the same time, which is the novel batch updating scheme. The experimental results show that our efficient scheme has better efficiency than those of existing methods.