• 해양환경안전학회지
• /
• 제27권6호
• /
• pp.846-855
• /
• 2021

최근 친환경, 신재생 에너지 수요에 따라서 해상풍력발전 분야는 빠른 성장세와 설비의 대형화에 따른 전용설치선박의 관련 기술개발이 요구되고 있다. 해상풍력설치선박(WTIV: Wind Turbine Installation Vessel)은 설치 작업 시 선체를 파도의 영향을 받지 않는 높이로 이동시키고 모든 환경하중은 레그가 담당한다. 특히 파랑하중은 불규칙파로 구성되어 있기 때문에, 정확한 동적응답특성을 파악하는 것은 아주 중요한 문제이다. 이러한 동적응답해석은 간이법의 하나인 단자유도법을 널리 활용하고 있으나, 불규칙 파를 고려하지 못하는 제약조건이 있다. 따라서 현재 설계 시 불규칙 파에 대한 시간영역 계산이 가능한 다자유도 계산법을 사용하고 있다. 그러나 다자유도 계산법에서 시간영역 해석은 정도 높은 계산 결과를 제공하지만, 데이터의 수렴도가 민감하고 복잡성에 있어 설계 시 어려움이 있다. 따라서 본 논문은 다양한 변수를 기준으로 한 시간영역 해석을 통하여 불규칙 파의 동적응답 특성을 표현 할 수 있는 동적증폭계수 추정식을 개발하였다. 기존 다자유도 모델 대비 계산시간 단축 및 정확도 확보를 확인하였다. 개발된 동적증폭계수 추정식은 WTIV 및 유사 구조물 설계에 활용이 가능할 것으로 판단된다.

• 대한토목학회논문집
• /
• 제30권3A호
• /
• pp.211-219
• /
• 2010

고속철도교량의 설계개념은 정적하중에 따른 충격계수를 고려하여 기존 교량 구조물의 강성을 증가시키기 위한 방안을 적용하고 있으며, 전반적인 구조설계 과정은 선진 외국기술에 의존하고 있는 실정이다. 그러나 고속철도(Korea Train eXpress: KTX)의 긴 연장(380 m)과 고속(300 km/h) 주행은 공진현상에 상당한 영향을 미치기 때문에 고속철도교량의 동적증폭계수(DAF) 및 동적성능 평가는 상세한 검토가 필수적으로 수행되어야 할 것이다. 따라서 이 연구에서는 전형적인 PSC 박스 거더 고속철도교량을 대상으로 동적성능을 효율적으로 검토하고자 하며, 합리적인 구조설계를 위한 기초자료를 제시하고자 한다. 이를 위해, 기존문헌을 토대로 KTX의 하중선도를 고려하여 정적해석을 수행하였다. 또한 다양한 해석변수를 고려하여 KTX의 이동하중을 시계열하중으로 변환하였으며, 변환된 시계열하중을 이용하여 시간이력해석을 합리적으로 평가하였다. 이때, 시계열하중을 산정하기 위한 변수는 KTX의 하중재하 절점간격, 시간증분 및 속도변화를 고려하였다. FE해석 결과를 바탕으로 PSC 박스 거더 고속철도교량의 동적성능을 체계적으로 검토하였으며, 국내외 관련규정에 따라 구조안전성을 정량적으로 평가하였다.

• International Journal of Fluid Machinery and Systems
• /
• 제9권2호
• /
• pp.160-168
• /
• 2016

In high speed turbopumps, cavitation occurs and often causes the flow instabilities such as cavitation surge and rotating cavitation. The occurrence of these cavitation instabilities is considered to relate to dynamic characteristics of the cavitation, which are modelled using a cavitation compliance and a mass flow gain factor. Various types of cavitation such as a blade surface cavitation, a tip leakage vortex cavitation, and a backflow vortex cavitation occur at the same time in the inducer and the dynamic characteristics of each cavitation have not been clarified yet in experiments. Focusing on the blade surface cavitation as one of fundamental cavitation, we investigated the dynamic characteristics of the blade surface cavitation on a flat plate hydrofoil in experiments in the present study.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.385-386
• /
• 2008

Dynamic stability of the vehicle rearview mirror is an important factor for the driver's visual perception (image blur) when driving down the road and regarded as one of the vehicle level N&V performance of visible component vibration. Several projects within GM identified a set of objective metrics and validation methods that can replace current existing subjective evaluation of mirror stability. This paper presents objective evaluation results for assessing dynamic stability (angle of rotation) of the vehicle rearview mirrors using both in-lab FRF measurements and on-road testing.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.563-568
• /
• 2003

High-speed railway bridges subject to effect of dynamic loads by interaction between vehicle load which run specially fast and behavior of bridges. Such dynamic load effects result in fluctuations and fatigues to each elements as well as whole conduct of bridges. and is influenced in life of bridges. For these reason. Analysis and estimation of data about dynamic behavior of bridges occupies important factor in that estimate the remaining life of bridges and select the maintenance. repair and retrofit. In this paper. Analysis for the dynamic behavior of bridges using displacement and acceleration data that is actuality measure data to the bridges of Seoul-Susan high speed railroad test section has been made.

• Structural Engineering and Mechanics
• /
• 제24권1호
• /
• pp.91-105
• /
• 2006

In this paper, post-earthquake capacity evaluation method of reinforced concrete buildings was studied. Substructure pseudo-dynamic test and static loading test of first story column in a four-story R/C building was carried out in order to investigate the validity of the evaluation method proposed in the Damage Assessment Guideline (JBDPA 2001). In pseudo-dynamic test, different levels of damage were induced in the specimens by pre-loading, and input levels of seismic motion, at which the specimens reached to the ultimate stage, were examined. From the experimental result, no significant difference in damage levels such as residual crack width between the specimens under static and pseudo-dynamic loading was found. It is shown that the seismic capacity reduction factors ${\eta}$ can provide a reasonable estimation of post-earthquake seismic capacity of R/C buildings suffered earthquakes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1425-1431
• /
• 2006

In this study, An analysis of correlation between the vibration transmissions and the dynamic characteristics for floor impact sound insulation materials through model test was carried out. As the results, the correlation coefficients between the vibration transmissions and the dynamic characteristics for floor impact sound insulation materials were over 0.8 at the heavy and light floor impact source and less dynamic stiffness was more effective in reducing the vibration transmission.

• 한국공작기계학회논문집
• /
• 제18권1호
• /
• pp.103-109
• /
• 2009

This paper presents structural design optimization of a micro milling machine for minimum weight and compliance using a genetic algorithm with dynamic penalty function. The optimization procedure consists of two design stages, which are the static and dynamic design optimization stages. The design problem, in this study, is to find out thickness of structural members which minimize the weight, the static compliance and the dynamic compliance of the micro milling machine under several constraints such as dimensional constraints, maximum compliance limit, and safety factor criterion. Optimization results showed a great reduction in the static and dynamic compliances at the spindle nose of the micro milling machine in spite of a little decrease in the machine weight.

• 한국정밀공학회지
• /
• 제8권2호
• /
• pp.57-68
• /
• 1991

In this study, to analyse the dynamic characteristics of a machine-tool spindle system, the spindle is mathematically represented by a Timoshenko beam including the internal damping of beam material, and each bearing by four bearing coefficients; stiffness and damping coefficients in moment and radial directions. And the dynamic compliance of the system is calculated by introducing the transfer matrix method, and the complex modal analysis method has been applied for the modal parameter identification. The influence of the bearing coefficients, material damping factor and bearing span on the dynamic characteristics of the system is parametrically examined.

• Structural Engineering and Mechanics
• /
• 제88권3호
• /
• pp.251-262
• /
• 2023

This paper presents a method for assessing the dynamic responses of gravity-based structures (GBS) under various seismic loads, with a focus on fluid-structure-ground interactions. Models of GBSs and their surrounding environments were developed, incorporating interaction effects among the structure, seawater, and seabed. Dynamic responses of the GBS subjected to three seismic loads-Chi-Chi, Northridge01, and Northridge02-were calculated, with consideration of both horizontal and vertical accelerations, as well as displacements. Parametric studies indicated that the primary factors affecting the dynamic responses of GBS were seismic loads characterized by significant input forces and accelerations. The frictional force on the ground had minimal impact on the horizontal and vertical displacements of the GBS. Weight emerged as a critical factor in anchoring the GBS to the ground and minimizing vertical accelerations and displacements.