• Journal of Environmental Science International
• /
• v.7 no.2
• /
• pp.209-216
• /
• 1998

Nanofiltration[NF45] and reverse osmosis membrane(HR98PP) separation treatment of dyestuff wastewater was carried out In order to separate relatively pure water from synthetic dyestuff wastewater, which consists of reactive dye, acid dye, basic dye, direct dye, and disperse dye. The experiments were performed by using the plate and frame membrane module. In the nanofiltration and reverse osmosis membrane separation, When the NaCl concentration was 0.1, 5.0, and 20.091, retention was 63.0, 46.0, 0.9%, respectively. When permeate flux was 125.0, 67.5, and 45.0 L/$m^2$ h, the osmotic pressure increased with Increasing the NaCl concentration. Permeate flux of two membranes Increased as temperature Increased due to segmental movement of polymer of the membrane and the rejection rate of dyestuff was decreased gradually. It was found that the rejection rate was about 95% in the nanofiltratlon, while the reverse osmosis membrane showed a high rejection rate of 99% under all temperature and pressures conditions.

• Clean Technology
• /
• v.10 no.1
• /
• pp.19-25
• /
• 2004

The leather was fixed with various colors through the dyeing process in leather manufacturing. During the dyeing process, the amount of 30~50% dyestuff which were not bonded with leather drained with waste water. These dyestuff raise lots of environmental problems, so technology for improving the fixing effect, levelling effect and penentration effect with the use of small amount of dyestuff has been required. Also, insufficient color fastness level 2~3 grade for common natural leather needs to be improved at the same time. Accordingly, the use of ultrasound(us) in dyeing process has decreased the amount of dyestuff and obtained the smooth permeability effect. So, we could find that the reduction of amount of dyestuff in wastewater led to decrease in environmental trouble caused by leather waste water with severe contamination degree and improved fastness up to 0.5 grades.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2005.05a
• /
• pp.213-215
• /
• 2005

The metal complexes can be influenced not only by the central metal atoms and the substituent groups, but also by the native of the chelating atoms. For example, near-infrared absorbing chromophores were synthesized by the reaction of phenylenediamine derivatives with a solution of pottassium hydroxide followed by the addition of nickel(II) chloride. These dyes provide absorbing infrared light over 780-840 nm with an extinction coefficient of $2.5-6.0{\times}10^4$. By introduction of alkyl, alkoxyl, cyano, and other functional group into the parent dye, these dyes greatly improved the solubility in organic solvent. New near-infrared absorbing donor-acceptor chromophores have been investigated by varying the electron donating and accepting strength of the two halves of the molecule. The cyanine chromophores permit the simplest way of obtaining systems that absorb well into the near-infrared region of the spectrum. Cyanine dyes possess high extinction coefficients that initially increase with Increasing chain length. These chromophores could be useful in near-infrared optical materials.

• Fashion & Textile Research Journal
• /
• v.11 no.4
• /
• pp.661-666
• /
• 2009

The purpose of this study is to analyze the dyeability of polyester(PET) fabric by thermal bonding with low melting component of bicomponent fiber and to describe the change of physical properties of thermal bonded PET fabrics. The PET fabrics were prepared with regular PET fiber as warp and bicomponent fiber as weft. The bicomponent fiber of sheath-core type was composed with a regular PET core and low melting PET sheath. The thermal bonding of PET fabric was carried out in pin tenter($195^{\circ}C$) for 60 seconds. In this study, we investigated the dye ability and fastness of the dyed PET fabric. Dye ability of E-type dyestuff is higher than S-type dyestuff. In the case of E- type dyestuff, the saturated dyeing time was 10minutes at $130^{\circ}C$. The washing fastness and light fastness were excellent as 4-5grade.

• Journal of the Korean Home Economics Association
• /
• v.47 no.1
• /
• pp.85-91
• /
• 2009

Dyeability and antimicrobial property of dyed pig skin with Coptis chinensis Franch was investigated. Dyestuff was extracted with water and concentrated. Pig skin was dyed and mordanted according to various dyeing temperature, dyeing time, dyestuff concentration, mordanting methods and kinds of mordants. The results of this experiment were as follows: 1. Dyeability of pig skin with Coptis chinensis Franch was best at 200%(owf) dyestuff concentration, 50${^{\circ}C}$ dyeing temperature, and 20min. dyeing time. 2. Pre-mordanting by Cu improved the K/S values of dyed pig skin. 3. Surface color and color difference of dyed pig skin showed various results according to the mordants used : generally their color was yellow, Al post-mordanted pig skin showed the greatest color difference. 4. Color fastness to drycleaning was considerably high in case of staining compared to fading. Fastness to light was improved by Cu-mordanting while other treatments were not effective. 5. Antimicrobial property of samples was not different (99.9%) between untreated and treated.

• Journal of the Korean Home Economics Association
• /
• v.25 no.3
• /
• pp.1-13
• /
• 1987

In this study, I have tested the effects of the agents and dyeing conditions on the Brazil-wood dyestuff as one plant dyestuffs. According to the tests, I have fount that color differenciation depending opon the agents and procedual condtitions. As the agents, Alm induced redness and light yellowness by Aluminum Acetate, dark greenness or blueness by Ferrous chloride, dark redness by Stannous Chloride, dark grenness or blueness by Copperous Chloride, light yellowness or greenness by Calcium Dihydroxide. On the other hand, color-fastness differed from various mordant agents. The color-fastnes was solid using multiple agents than sole agent.

• Fashion & Textile Research Journal
• /
• v.6 no.6
• /
• pp.799-802
• /
• 2004

The dyeability of the cotton fabric with Brassica campestris extract was investigated. The colorant was extracted with methanol. Cotton fabrics were dyed at various conditions such as temperatures, concentrations, dyed times, and mordanting methods. The maximum wavelength of extract was 421nm. The highest K/S value was showed at 200% dye concentration at $60^{\circ}C$, 45 minutes. As the effect of dyed temperature and mordanting on dyeability was not great, the Brassica campestris was one-color dyestuff.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2002.04a
• /
• pp.9-12
• /
• 2002

The Dyestuff is fixed to the fiber to color it in a unique way depending on the chemistry between them. Whenever there arose problems in coloring fibers, the chemistry of dyestuff could be adjusted to solve them. That manner new concept dye classes, e.g., reactive dyes, disperse dyes, cationic dyes, have arrived along with the introduction of new fibers. The attempt has made to introduce the new reactive dye to solve this problem.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.1
• /
• pp.34-42
• /
• 2015

The paper investigates environmental hazards and characteristics of the artificial lightweight aggregate manufactured by using dyestuff sludge from dyeing industrial complex. The dyestuff sludge used in this study is chemically treated with Ti and Fe salt for the purpose of recycling. The artificial lightweight aggregate is manufactured through 3 step; 1) Selecting the optimum moisture content by evaluating plasticity from the mixing ratio of the clay and sludge, 2) shaping round type based on the optimum mixing ratio, 3) drying and Sintering process. Based on KS F 2534 "Lightweight Aggregate for Structural concrete", the particle size, fineness modulus, the density, absorption, unit volume weight, stability and environmental hazards of the manufactured lightweight aggregate are evaluated. Experimental results show that the particle size and fineness modulus is out of the range. However, it is observed that other physical properties are within criteria. In addition, it is confirmed that the problem of the particle size and fineness modulus could be solved in the manufacturing process.

• Journal of Fashion Business
• /
• v.21 no.2
• /
• pp.105-112
• /
• 2017

A string wallcovering is a kind of textile wallcovering which is made of cellulose fiber yarn laminated on base paper. Compared with normal paper or PVC wallpaper, a string wallcovering is preferred continually in the interior design market, as it is not only environmentally friendly but it also has less cost on mass production without the weaving process and has a natural visual effect, excellent functionality such as thermo keeping, permeability, sound absorption. However, in the dyeing process, it is not appropriate to use plenty of energy such as water, electricity, steam or chemicals considering the environmental trend and the government policy plenty of energy such as water, electricity, steam or chemicals. Currently, a string wallcovering is made of raw white yarn and padding with direct dye or pigment which includes toxic elements, especially the use of direct dye is restricted in a part of the developed country due to inclusion of azo. In this study, we researched dyeing based on cold pad batch dyeing of a string wallcovering with reactive dyestuff. The peel strength and bending depth test confirmed that the optimum adhesive type and spread amount improved the water resistance of the string wallcovering. Also, pad batch dyeing with optimum reactive dyestuff enhanced the color fastness to light and rubbing in dry and wet conditions. Additionally, for improvement of color fastness to rubbing in a wet condition, the additional treatment finishing without soaping process which is used water. The results of this study can be used as basic data for environmentally friendly and energy saving of the textile wallcovering.